7 products found
GMC AIR Products
-
Grilles
-
Model SDG-001 - Single Deflection Grille
Standard Material: Aluminum. Used for return air ducts. Aerodinamic blades are easily adjustable. Mounted with 4 mm screws on frame. Optional: Clips or Plate-spring applications. On request, damper can be added to control air flow rate. Low pressure drop. Standard frame: Grilles with 22mm or 32mm. Eloxal, anodizing or electrostatic powder coating with the color from RAL ...
-
Diffuser
-
Model SCD-020 - Square Ceiling Diffuser
Standard Material: Aluminum profile. Usable for both supply and return air ducts. Direction of discharge can be selected to meet the requirements of room with 1 to 4 ways. Supply air can be oriented to vertically by blades of 1,2,3,4 of directions. Depending on architectural demands, can be manufactured in rectangular shape. Usable for places up to 2,6 - 4m. height. Has two models: Z-Bladed Model (SCD-120) and Curvilinear Bladed Model (SCD-220). On ...
-
Model CCD-021 - Circular Ceiling Diffuser
Standard Material: Aluminum profile. Usable for both supply and return air ducts. The circular design guarantees a uniform radial discharge of supply air application. Usable for places up to 4m. height. Has three models: Standard Model (CCD-121), Curvilinear Bladed Model (CCD-221) and Telescopic Model (CCD-321). On request, damper can be added to control flowing air volume. Mounted with 4 mm screws on frame. Optional: Clips or Plate-spring applications. ...
-
Volume Control Damper
-
Model VCD-041 - Volume Control Damper
Standard: Aluminum sheet material. Optional: Galvanized or stainless steel. Usable for adjusting the air volume at supply and return air ducts. Highly resistant to corrosion. Position of blades is controlled with PVC gear mechanism and metal handles. Also, supplied with a servo-motor on request. Leak-proof gaskets can be applied on blades, on request. Has three models: 103mm Bladed / PVC-Geared Volume Damper (VCD-141), 140mm Bladed / Levered Volume Damper ...
-
Model BDD-042 - Back Draft Damper
Chasis and blades are made of galvanised steel sheet or aluminum profile. Back Draft damper is designed to prevent back-flow when fan motor is off and to open when fan motor is on. Provides one-way flow in ducting system. Has two models: Standart Model (BDD-142) and Circular Model (BDD-242). Reduces the heat loss and prevents ingress of dust, rain, insect and bird when system is off. Optional: Flow rate - Pressure settings can be done with balance load. ...
-
Louvers
-
Model EXL-061 - External Louver
Standard Material: Aluminum Profile. Usable for fresh air intakes, air exhausts, places where natural ventilation is needed and air volume control and direction are not. Has three models: Z-type Standard Bladed (EXL-161), Curvilinear type Standard Bladed (EXL-261), Z- Type Wide Bladed (EXL-361) and Circular External Louver (EXL-461). Standard Frame width is 32.5mm. On request, frame width can be reduced to 22mm. Mounted with 4 mm screws with appropriate ...
-
Special Units
-
Model HFB-092 - HEPA Filter Box
Standard Material: AISI-304 Stainless Steel. Suitable for air supply and return air where hygenic requirements shall be met e.g hospitals, clean rooms, food industry and paharmeceutical facilites. Leakage test holes are available. Has three models: Circular Lateral Access (HFB-192), Circular Overhead Access (HFB-292), Rectangular Lateral Access (HFB-392). Hepa Filter Boxes are designed and manufactured in compliance with DIN 1946/Part4, with %100 leakage ...