12 products found
Products by Grimme Landmaschinenfabrik GmbH & Co. KG
-
Grimme - Model SE 75-20 - Potato Harvester
Grimme single row Potato Harvester SE 75-20 with 2-tonne bunker capacity. A Grimme machine with innovative engineering features, covered by international patents, which gives higher output, more effective separation and even gentler crop ...
-
Potato Technology- Soil Cultivation
-
Potato Technology- Separating Technology
-
Potato Technology- Planting Technology
-
Model BF 200 - Potato Separation System
The first step of the separation system is to set up the beds. Two basic models are available for the various soil conditions. The large BF plough body for use especially on medium to heavy soils with big stones and large amount on clods. Or the BFL plough body with long side shapers to keep the loose soil in the bed, preventing it from falling back into the furrow. It is possible to combine both bodies with bed loosening tines to work in non-prepared ...
-
Grimme - Model CS 150/170 - Separator
An effective separation is the basis for the growing of high quality potatoes on stony and cloddy fields. Various combinations of stars and main webs give the right solution for the individual grower. The patented RotaPower increases the sieving output by 25 % compared to traditional systems. The rotor crumbles the compacted soil and prepares it for an increased sieving. Wear and tear of the following star rollers and main webs is significantly ...
-
Grimme - Model GL 32 E - Potato Planter
The GL 32 E with 500 kg hopper is available for row width 75 or 90 cm. Ideal for smaller farms to start with, easy to operate and low-cost investment. Ideal for accurate and trouble-free planting. The furrow opener on a parallelogram for exact depth control are available as an option. Depending on the conditions ridging bodies behind covering discs are another ...
-
Front Fertiliser Box / Front Cultivator
The front cultivator avoids soil compaction by moving the soil away from the tractor track. Loose soil is necessary for good potato growing. The front fertiliser unit supports the potato growing by placing the fertiliser underneath and to the side of the tuber. The advantage is that the potato is stimulated for even root ...
-
Beet Technology- Trailed harvester
-
Model BM 300 / BM 330 - Defoliator
The 6-row defoliator BM 300 / BM 330 developed for the 2-phase process. It chops and removes the beet leaves across the entire machine width. Equipped with a durable steel flail shaft , as well as two non-wear cleaning rubber flail shafts. Optionally, a disc scalper are available which ensures a precise contour guidance. Working widths between 45 cm and 56 cm available for the BM 300 / BM ...
-
Grimme - Model FT 300 - Front Topper
The 6-row inline-front topper FT 300 with its patented leaf discharge reliably avoids irritating blocking in the scalper area. The machine has been developed for the 1-phase system in combination with the ROOTSTER 604. In addition, this system ensures an optimum distribution of the chopped leaf mass, thus providing the best conditions for a reduced soil cultivation. Flexible row width adjustment from 45 to 50 cm of the FT ...
-
Model FM 300 - Front Mulcher
The 6-row inline front mulcher FM has been developed for the 1-phase process in combination with the ROOTSTER 604. A counter rotating multi shaft and cleaning shaft rotating in driving direction very gentle defoliate the beet. The result are beet heads without any leaves and this achieves clearly higher volume yields then with the conventional scalping method. Machine setting to 45 or 50 cm row ...
-
Vegetable Technology- Carrot Harvest Technology
-
Model CR 1500 - Ridge Crowner
4 specially hardened conical discs on 2 manual driven rotors scalp the carrots. The cutting depth is hydraulically adjustable from the drivers cab over the whole cutting width of 150 cm. Support wheels in front and behind the discs ensure a constant cutting height, no matter if running on ridges or in ...
-
ROOTSTER - Model 604 - Trailed Harvester
Simple and robust, this is the formula for the development of the trailed beet harvester ROOTSTER with 4-ton overloading bunker, which are available as 6-row variant. All machine functions can be conveniently controlled via an operator terminal. All other drives are mechanical and of low-maintenance design. This does not only make it easier to carry out repairs, but also reduces the required power (from 110 kW / 150 HP). Use of the ROOTSTER as 1-phase ...
-
Grimme i-systems
-
ISOBUS - Control Systems
With an ISOBUS compatible tractor you easily and quickly connect your Grimme machine and both units become one. All functions of the Grimme machine controlled via the tractor ...
-
Model CCI 100 / 200 - Terminal Control Systems
The DLG-award winning enhancement of the Visual Operator terminal. The CCI 200 is equipped with all of the functions of the VC 50 – and many additional advantages. Among others, it is equipped with an even larger, glare-free touch display (8.4') and is completely ISOBUS-capable.Further information: ...