3 software found
HALCO Software Systems Ltd. Software
-
Other
-
CTL-SIM - Cut-to-Length Harvesting Simulation Program Software
CTL-SIM is a comprehensive simulation program that allows accurate modeling of cut-to-length harvesting operations. By simulating accurately the cutting decisions of mechanical harvesters, improved harvest planning and equipment set-up decisions can be made. Different bucking rules can be applied depending on stem quality, for example to consider production of veneer peelers from high-quality stems. If cruiser-called grades are included in timber ...
-
LOGSIM - Log-Making Simulation Program Software
LOGSIM is a comprehensive log-making simulation program. Typically, the log products have grades which depend on log diameter and length, the extent of defects such as knots, scars, and on form characteristics such as ...
-
BUCKPRO - Bucking Improvement System
To help achieve the best performance many mills develop bucking rules for the cut-off saw operators. These rules are often in the form of a list, with the desired bucked lengths for different input lengths and diameters. Specification of these rules is a difficult exercise, as one tries to maximize value, recovery, and produce an acceptable product, particularly length, mix. BUCKPRO™ will help determine the optimum bucking "policy", or rules, for ...