Halse of Honiton

118 products found

Products by Harry West (Prees) Ltd

  • Machinery - West Agricultural Machinery

  • West - Diet Feeder

    West - Diet Feeder

    The new West Diet Feeder is the latest product developed for the current demand for larger capacity units incorporating high-efficiency feeding technology. The design of the latest units incorporates Harry Wests proven configuration of low power requirements (up to 100 hp) and high feedout (over 1.5m) as standard, along with the company's renowned build quality and reliability factors.

  • West - Rear Discharge Spreader

    West - Rear Discharge Spreader

    Built to a high capacity specification and capable of achieving a spread width of up to 12m (40ft), the West Rear Discharge Spreader unit is particularly suitable for farmyard manure. With the standard hydraulic rear gate, it can also be used with poultry manure and semi-solids. The twin rear vertical rotating beaters operate at a powerful 400 rpm from the PTO drive input of 1000 rpm. For trouble free maintenance the rear beaters are fitted with...

  • West - Model 10t Grain - Trailers for Hire

    West - Model 10t Grain - Trailers for Hire

    Built for strength and durability, the range of monocoque trailers from Harry West have been developed to tackle the toughest working conditions on the land. Available in 10 to 16 tonne models, each features a parallel chassis with monocoque constructed tapered body for easy unloading, and tandem axles. The silage equipment kit provides front loading, sides, automatic opening back and silage canopy as standard. Body Monocoque design constructed in 3mm...

  • Machinary - Agricultural Machinery Hire

  • West - Model 1300 - Dual Spreaders for Hire

    West - Model 1300 - Dual Spreaders for Hire

    West Dual Spreaders are a firm favourite with farmers and contractors alike. The advanced feature of the Dual were recognised as far back as 1982 when it was awarded the Royal Agricultural Society of England GOLD Medal at the Royal Show. Since then many thousands have been sold in the UK. The design of the Dual, bringing the material forward and weight onto the rear of the tractor, ensures confidence and safety in hilly conditions. All types of...

  • West - Model 1300 - Dual Spreaders

    West - Model 1300 - Dual Spreaders

    West Dual Spreaders are a firm favourite with farmers and contractors alike. The advanced feature of the Dual were recognised as far back as 1982 when it was awarded the Royal Agricultural Society of England GOLD Medal at the Royal Show. Since then many thousands have been sold in the UK. The design of the Dual, bringing the material forward and weight onto the rear of the tractor, ensures confidence and safety...

Products by Gurney Reeve & Co. Ltd

  • Material Handling Attachments

  • Model ELCR - Root Crop Buckets

    Model ELCR - Root Crop Buckets

    Designed for Loaders and Telehandlers up to 3 tonne capacity. Handles most root crops – sugar beet, fodder beet etc. Can either be supplied c/w fingers as shown or c/w weld-on edge. Fingers will be supplied unless specified on order.

  • Model SG190 - Shear Grab

    Model SG190 - Shear Grab

    Strong and robust designed to leave cleanly sheared, sealed and tidy silage face to prevent spoilage and wastage. Grabs feature a fully enclosed cutting frame as standard.

  • Model SB - Shear Bucket

    Model SB - Shear Bucket

    A strong and versatile bucket. It will neatly cut silage blocks leaving a sealed face yet still can be used as a re-handling bucket for loose feedstuffs.

  • Model HDF - Manure Silage Forks

    Model HDF - Manure Silage Forks

    Open back design with centre filled in to protect prime mover. Forged type tines supplied as standard. Supplied c/w Quick Hitch mounting Brackets

  • Log Splitters

Products by Major Equipment

  • Forestry

  • Model LS3000 - Log Splitter

    Model LS3000 - Log Splitter

    The MAJOR Log Splitter range has three models available.  All models are robustly constructed to withstand the punishment of continuous use. Safety is paramount at Major, with the operator required to use both hands to control the hydraulic ram.

  • Toppers, and Flails Mowers

  • Model 9FTGDXHD - Centre Mounted Topper

    Model 9FTGDXHD - Centre Mounted Topper

    The MAJOR Centre Mounted Topper is a fully gear driven machine fitted with high speed rotors and twin cut swinging blades. The 909HD Topper is a heavier duty version of the 9FTGDXHD topper and features extra heavy duty gearboxes.

  • Model MJ50-240 - Disc Mower

    Model MJ50-240 - Disc Mower

    The MAJOR Disc Mower has been designed to ensure you get a professional quality, clean cut every time. This machine allows a single operator to mount the mower onto the tractor quickly and easily without assistance. The heavy duty headstock and frame are designed for extra strength while the machine is working and during transport. The cutting bar is produced by Comer and is fully serviceable from the top. Spare parts are readily available. A grass...

  • Slurry Handling

  • Alpine - Model 2150ALP-LGP - Slurry Tankers

    Alpine - Model 2150ALP-LGP - Slurry Tankers

    The Alpine tanker design is based on the contractor LGP specification, but with a dropped axle to give a low centre of gravity.  This results in less ground pressure than standard axle tankers and minimal ground damage even in wet conditions.  There are three sizes available: 2150, 2300 and 2670 Gallons.  As with all MAJOR tankers, the inside is baffled to prevent wave motions and improve operator safety.

  • Challenger  - Slurry Tanker

    Challenger - Slurry Tanker

    The MAJOR Challenger Tanker is a fresh approach to tandem axle tankers. Using a heavy duty industrial strength bogey axle assembly, the front axle can be lifted by hydraulic control.  This allows the operator to turn tighter corners on the headlands or in the yard and eliminates damage to soil structure, ground conditions and tyres. The axle lift also acts as a weight transfer mechanism to the tractor and  aids traction. When the tank...

  • Contractor  - Model LGP  - Slurry Tanker

    Contractor - Model LGP - Slurry Tanker

    The MAJOR LGP Tanker is a robust vehicle designed and manufactured with the larger producer or contractor in mind. The MAJOR LGP Tanker is unique in design, in that the barrel is supported by a separate chassis. The position of the axle relative to the machine length means that a perfect balance is achieved with 80% of the weight running on the tanker’s axle and the remainder being carried on the tractor drawbar. The tanker is baffled to prevent...

  • Model MJDI-5200 - Disc Injector

    Model MJDI-5200 - Disc Injector

    The MAJOR 5.2m Disc Injector is a combined soil fertilising and furrowing machine with a working depth from 20mm (3/4”) to 60mm (2 1/2”). A powerful Vogelsang macerator delivers slurry evenly through 40mm pipes. The slurry is inserted into slits created by the spring steel self sharpening cutting disks. The unit folds hydraulically giving a 2.4m transport width.

  • Roller Mowers

  • SWIFT  - Model OSM - Offset Roller Mower

    SWIFT - Model OSM - Offset Roller Mower

    This is a versatile and nimble machine designed for professional users.  Thanks to the durable and pivoting headstock, this machine easily copes with the most extreme work conditions.  All MAJOR machines are robust and the Offset Swift Mower is no exception!  When cutting grass, the roller system allows the machine to follow the contours of the most undulating ground to give a perfect finish.

  • Flails and Finishing Mowers

  • Model MR - Finishing Mower

    Model MR - Finishing Mower

    The MAJOR Finishing Mower is perfect for large lawns, estates, parks, golf courses and municipal maintenance.  It is easily connected to the tractors 3 point linkage to have the machine ready for operation in minutes.  With operator safety paramount on all MAJOR machines, the maintenance points are positioned to the top of the machine to eliminate danger to the operator. The four castor wheels can be set precisely to prevent scalping and are...

Products by Kongskilde Industries A/S

  • Agriculture - Complete Diet Mixers

  • Kongskilde - Model VM 1  - Feeder

    Kongskilde - Model VM 1 - Feeder

    The JF feeder model VM 1 can feed between 55 and 100 dairy cows a day. It shreds all types of bales - round or square, straw, hay or silage. The chopped straw fodder is mixed quickly and efficiently with other types of feed. 

  • Agriculture - Mowers

  • Kongskilde - Model GMS - Mowers

    Kongskilde - Model GMS - Mowers

    Double swivel gearbox enables sharp 90 degree headland turns. JFcutterbar, strong and reliable With integrated stone guard. Top Safe system means reduced impact on the cutterbar.

  • Kongskilde - Agriculture - Forage Harvesters

  • Kongskilde - Model ES - Forage Harvesters

    Kongskilde - Model ES - Forage Harvesters

    For interconnection with existing  wagon. Upper Cut, low fuel consumption. New reinforced cutting drum, higher capacity with the same input.Wide feed intake, better flow and thus higher capacity. New control box, higher comfort and easy to operate. Pro-Tec clutch protection, reduced impact on the transmission.

  • Kongskilde - Model FC 860 - Forage Harvesters

    Kongskilde - Model FC 860 - Forage Harvesters

    L frame, side mounted. Good weight distribution on the tractor, good control in hilly conditions. Upper Cut, low fuel consumption. New reinforced cutting drum, higher capacity with the same input

  • Kongskilde - Model FCT - Forage Harvesters

    Kongskilde - Model FCT - Forage Harvesters

    Upper Cut, low fuel consumption. New reinforced cutting drum, higher capacity with the same input. Wide feed intake, better flow and thus higher capacity. New control box, higher comfort and easy to operate. Pro-Tec clutch protection, reduced impact on the transmission.

  • Agriculture - Rakes

  • Kongskilde - Model R DS - Single Rotor Rakes

    Kongskilde - Model R DS - Single Rotor Rakes

    Strong and reliable machine. Large rotor surface. Low in-field weight distribution. Optimal ground following. Articulated headstock, wheels are close to the rake arm, good optimal ground following.

  • Agriculture - Soil Preparation

  • ÖVERUM  - Model CT-F - Fully Mounted Conventional Plough

    ÖVERUM - Model CT-F - Fully Mounted Conventional Plough

    The Överum CT-series consists of models from 2 – 5 furrows with fully automatic hydraulic stonerelease system (H), or fixed beam version with shear bolts (F). Överum CT is designed with focus on strength and clearance, for long life and trouble-free operation. Long interbody clearance gives free flow for crop residues and enough room for modern effective skimmers. The frame design is simple and strong. The furrow width adjustment in...

  • Kongskilde EcoLine - Mounted Seed Drills

    Kongskilde EcoLine - Mounted Seed Drills

    Ideal for small and medium-sized farms, the EcoLine drill can be operated either as a solo machine behind the tractor or in combination with a tined cultivator, power harrow or Rotavator. The lightweight nature of the EcoLine drill (3 m model = 499kg) makes it particularly suitable for smaller tractors, and due to the fact that the hopper forms part of the frame the construction of the drill is very robust. Possible row spacing 10, 12, 13, 14 or 16...

  • Germinator  - Model Pro - Seedbed Cultivation

    Germinator - Model Pro - Seedbed Cultivation

    The concept behind the Germinator Pro series from Kongskilde is to offer a solution for creating a high quality seedbed in ploughed conditions. The yield achieved in high value crops such as sugar beet, onions etc. bears close correlation to the level of preparation of the seedbed. Higher crop prices in general place additional demands on maximising the yield from every crop grown. The new Kongskilde Germinator Pro is a method of creating an...

Products by KRONE GmbH & Co. KG

  • Mower Conditioners

  • Krone - Model BIG M 420 - High Performance Mower Conditioners

    Krone - Model BIG M 420 - High Performance Mower Conditioners

    KRONE proudly presents BiG M 420 – a versatile specialist that takes care of all your mowing applications. BiG M 420 is the machine that gears you up for every task. Just look at its high-output CV conditioner or CRi roller conditioner or take the spreading or swath merging options. Cutting at an enormous work width of up to 9.7 metres and offering tremendous power reserves while distributing the weight uniformly, BiG M 420 produces clean and...

  • Disc Mowers

  • Krone - Model AM-S / AM-CV - Rear-Mounted Disc Mowers

    Krone - Model AM-S / AM-CV - Rear-Mounted Disc Mowers

    High-comfort and high-efficiency mowers.Side-pull mowers with huge pivoting angle. Driveshaft powered gears for ultimate efficiency. Massive spur gears for quiet running and longevity. Robust and fully welded cutterbar. Quick-fit blades for quick and easy change (Not available in North America). Pivoting V-shaped steel tines for optimum conditioning.

  • EasyCut - Model 32 CV Float - Front-Mounted Disc Mowers

    EasyCut - Model 32 CV Float - Front-Mounted Disc Mowers

    The headstock with integral coil provides the suspension the mower requires to follow all ground contours and produce a uniform cut while protecting the crop from contamination. The kinematics between coil spring and swing maintains a consistent ground pressure even when operating in undulating terrain.

  • Rotary Tedders

  • Krone - Model KWT 2000 - Trailed Rotary Tedders

    Krone - Model KWT 2000 - Trailed Rotary Tedders

    The champion among the rotary tedders. Delivering results - with a 19.6 m (64‘4“) working width.18 small-diameter rotors provide an optimum spread. Rugged build with extra strong beams. Convenient: Hydraulic depth control. Easy: Change between transport and work position at the touch of a button. Unique from KRONE: Steered running gear with working and transport mode. Compact transport machine tracks behind the tractor. Excellent tracking...

  • Krone - Model KW  - Mounted Rotary Tedders

    Krone - Model KW - Mounted Rotary Tedders

    Three-point mounted models with 4 and 6 rotorsKW 4.62/4, KW 5.52/4x7, KW 6.02/6, KW 6.72/6 and KW 7.82/6x7 – working at 4.60 m to 7.80 m (15'1' to 25'7') widths with rotors in various diameters. Central border spreading facility manual or hydraulic control (option). Convenient operation via a single-acting spool

  • Krone - Model KW-T  - Trailed Rotary Tedders

    Krone - Model KW-T - Trailed Rotary Tedders

    Trailed models with 4 and 6 rotorsKW 5.52/4x7T, KW 7.82/6x7T, 5.50 m-7.80 m (18'1' - 25'7') work widths. Minimum input requirement . No load is taken off the tractor’s front axle. Easy tractor attachment/removal. Hydraulic pivoting drawbar moves conveniently into transport position.

  • Rotary Rakes

  • Krone Swadro  - Model 35/38/42/46 - Single Rotor Rakes

    Krone Swadro - Model 35/38/42/46 - Single Rotor Rakes

    The ideal rake for small and mid-sized farms At home on many farms, the three-point linkage Swadro single-rotor rake offers work widths of 3.50m (11' 6') to 4.60m (15'). Sharing many proven features with the established KRONE high-output rakes, these small and mid-sized rakes provide an exemplary strong and unique technical design.

  • Krone Swadro  - Model 700 Plus, 800/26 Plus, 900 Plus - Twin Rotor Rakes

    Krone Swadro - Model 700 Plus, 800/26 Plus, 900 Plus - Twin Rotor Rakes

    Swadro 700 Plus, 800/26 Plus, 900 PlusUltimate level of comfort ‘Plus’ refers to one extra feature – high-level operator comfort – that is available on the center-delivery models Swadro 700 Plus, 800/26 Plus and 900 Plus. Providing ease of operation, these models tick every box, everything falling into place and bringing fun to field work. In order for work to run smoothly in the field, competent design and build quality must...

  • Forage Wagons

  • Krone - Model AX - Forage and Discharge Wagon

    Krone - Model AX - Forage and Discharge Wagon

    More output from less horsepower - Buying a KRONE AX forage wagon means buying into experience and expertise. Innovations such as the camless EasyFlow pick-up, the massive cut-and-feed rotor, the knife bank that swings out to the side, and the chain-and-slat floor that slopes at the front combine to implement higher throughputs, lower input power, more operator comfort and less wear and maintenance.

  • Krone - Model MX - Forage and Discharge Wagon

    Krone - Model MX - Forage and Discharge Wagon

    More output from less horsepower: Buying a KRONE MX forage wagon means buying into experience and expertise. Innovations such as the camless EasyFlow pick-up system, the massive cut-and-feed rotor, the knife bank that swings out to the side, and the chain-and-slat floor that slopes at the front, they all combine to implement higher throughputs, lower power inputs, more operator comfort and less wear and maintenance.

  • Forage Transport Wagon

  • Krone - Model TX - Forage Transport Wagon

    Krone - Model TX - Forage Transport Wagon

    Forage Transport Wagon Up to 56 m³ (1,978 ft³) capacity (DIN 11741). Sloping steel floor at the front for increased machine capacity and stability. Single frame design for a low dead weight and high payload. Optional discharge rollers. Flared tail- and headboards for easier and loss-free filling. Articulated drawbar with hydraulic control lowers the machine‘s front end for a larger filling angle. Extremely powerful roller chain to...

Products by Ovlac S.A

  • Reversible Ploughs

  • Ovlac - Model 120 Series - Hydraulic Auto Reset Ploughs

    Ovlac - Model 120 Series - Hydraulic Auto Reset Ploughs

    Ovlac ploughs with hydraulic Auto Reset protection are designed to work in any kind of soil. On light soils, it is possible to reduce the break away pressure in order to avoid pulling stones out to the surface. In heavy soils the pressure can be increased to gain penetration capacity and keep the bodies in an optimum working position. The hydraulic protection system from Ovlac has been designed reducing the total number of moving parts. This way, we...

  • Ovlac - Model SF and LF - Shearbolt Ploughs

    Ovlac - Model SF and LF - Shearbolt Ploughs

    SF and LF models feature shearbolt protection system designed to break with a pressure of 3.000kg at the plough point. There are two models available, depending on the working width adjustment. The SF model has hydraulically variable working width between 30 and 50cm per body approximately (depending on the body spacing), whereas in the LB model, the working width can be set manually at four different steps. Depending on the prevailing conditions,...

  • Conventional Ploughs

  • Model SLB - Conventional Semimounted Ploughs

    Model SLB - Conventional Semimounted Ploughs

    The SFB model is a mono-wheel conventional semimounted plough available in 5 to 8 body versions. Thanks to the Non Stop, 100% maintenance free security system, the SFB can adapt to any soil and condition. The working depth as well as the working width of the first body can be hydraulically adjusted from the tractor cabin. Therefore, three controls are needed on the cabin, two D.E and one S.E. The SFB can be fitted with a wide selection of accesories...

  • Model FB - Conventional Mounted Ploughs

    Model FB - Conventional Mounted Ploughs

    Two conventional mounted models round up the Ovlac plough line. The FF model is a simpler an inexpensive option. It fits shear bolt security system, designed to break at a pressure of 3.000 kg, and manual four-step adjustable working width. The FB model is fitted with Ovlac´s leaf spring security system –which is 100% maintenance-free- as well as with hydraulically adjustable working width between 20 and 50cm per body. Ovlac has an broad...

  • Shallow Ploughs

  • Model Mini-N - Shallow Plough

    Model Mini-N - Shallow Plough

    Ovlac´s Mini has been designed to combine the advantages of traditional ploughing and minimum tillage. Traditional ploughing is, without any doubt, the best and more sustainable method for weed control. In biological farming it actually may be the only possibility as chemicals are not allowed. The Mini-R can cope with large volumes of trash at small depths (between 8 and 20 cm). The shallow working depth promotes the development of cavities...

  • Model Mini - Shallow Plough

    Model Mini - Shallow Plough

    Ovlac´s Mini has been designed to combine the advantages of traditional ploughing and minimum tillage. Traditional ploughing is, without any doubt, the best and more sustainable method for weed control. In Biological farming it actually may be the only possibility as chemicals are not allowed. The Mini can cope with large volumes of trash at small depths (between 8 and 20 cm). The shallow working depth promotes the development of cavities where...

  • Cultivators

  • Minichisel - Model MCH - Cultivator

    Minichisel - Model MCH - Cultivator

    Ovlac´s Minichisel is an unique stubble cultivator  available in 2 and 3 row configurations, trailed or mounted, with working widths from 2.5m up to 10m. Its 35×35 mm tines (30×30 also available as option)  allow to work between 3 and 25cm deep in the most demanding conditions. Indeed, the stone protection system based on rubber suspensions patented by Ovlac ( it was typically used just on short disc harrows ) provides a...

  • Versatill - Cultivator

    Versatill - Cultivator

    Ovlac´s Versatill is designed as an all-purpose stubble cultivator. Its 3 rows of high clearance tines –85 cm- featuring leaf spring auto reset protection guarantee an optimal work in all conditions as well as trouble-free handling of high volumes of trash. Thereafter, a row of notched discs chop, mix and level the resulting work. Last but not least, at the rear of the machine, a wide range of rollers is available to ensure a perfect...

  • Short Disc Harrows

  • Maxidisc - Model II - Short Disc Harrow

    Maxidisc - Model II - Short Disc Harrow

    The Maxidisc II is Ovlac´s latest short disc harrow generation. With a compact and clear design which does not forget consistency at all, the Maxidisc II allows to work in all types of soils as well as on any cultivation regardless of the amount of residue on the surface. Depending on the working requirements, the Maxidisc II can be fitted with 20″ (510mm) or 24″ (610mm) discs for a working depth between 5 and 15cm. Discs are...

  • Eurodisc - Short Disc Harrow

    Eurodisc - Short Disc Harrow

    Eurodisc is the most robust product in the Ovlac short disc harrow series. It fits  24″ discs (610 mm) with an aggressive angle of attack both in vertical and in the working directions. That is why the Eurodisc has a high penetration capacity and provides an intense mixing and tilling of the stubble at depths of up to 15 cm  In accordance with the product robustness, the Eurodisc features leaf spring stone protection which, on top of...

Products by Albutt

  • Agricultural

  • Albutt - Bag Filling Bucket

    Albutt - Bag Filling Bucket

    Use with any telehandler or loader. Fill up to 40 bags per hour. No spill design keeps your yard clean and reduces waste. Hydraulically operated doors. Fill bags with; sand, aggregate, topsoil, wood bark and any free flowing material. Fill trailers and vans with precise control. Stack bags after filling. Load filled bags onto trailers and trucks. Bags secured on hangers, remove bags without operator leaving machine cab. Heavy duty design with direct...

  • Albutt - Model BL - Bag Lift Telehandlers

    Albutt - Model BL - Bag Lift Telehandlers

    Heavy duty design. Lifts 600kg and 1000kg bags. See chart above . One, two or four bag models . Brackets included. Arm spacings for BL4-600 & BL4-1000 are different. Complete with test certificate and CE marked. New model to lift - 4 x 1000 kilo bags

  • Albutt - Model A0 - Rehandling Bucket

    Albutt - Model A0 - Rehandling Bucket

    Removeable side plates. Cutting edge - 500 Brinnel. Corner wearpads to underside - 500 Brinnel. Heavy duty power grab with Hardox tines. Wide opening grab 1774mm. Brackets for telehandler our loader included

  • Albutt - Model B - Standard Duty Buck Rake

    Albutt - Model B - Standard Duty Buck Rake

    Supplied with 3 point link brackets. Supplied with 4 side tines. Telehandler brackets extra (bolt on). Fitted with flow divider valve. Fitted with flow control valve. Twin hydraulic rams, push at side if gate to prevent gate twisting. Fork has open back to prevent build up of grass in gate mechanism. Forged steel tines 55' (1400mm), mounted in bushes welded into box section. Heavy duty box section 100mm x 100mm x 10mm. Tine guard - optional extra....

  • Forestry

  • Albutt - Model DB - Dozer Blade

    Albutt - Model DB - Dozer Blade

    Heavy duty specification. High tensile steel body - 'Domex'. Hardened cutting edge 500 Brinell. Complete with brackets. Complete with parking legs. Bump stops. Manual or hydraulic angle control (30 degrees) to both sides. Ideal for grading tracks and roads

  • Model LG500 - Heavy Duty Timber Grab

    Model LG500 - Heavy Duty Timber Grab

    Hardox fork tines - welded. One piece grab. Ideal for bundles of cut timber. Handles green waste and tree stumps. Smallest log dia - 6 x 325mm. Largest log dia - 1 x 800mm. Opens to 1684mm. Twin hydraulic rams

  • Model LG1000 - Log Splitter

    Model LG1000 - Log Splitter

    10.0 tonnes force. Three point linkage (Cat 1 & 2). Hardox splitting edge. Auto ram return. Non slip splitting table. Protected hydraulic ram.Anti burst hoses. Two handed operation - for safe operation .

  • Site Pro  - Model WR - Heavy Duty Grapple & Rake

    Site Pro - Model WR - Heavy Duty Grapple & Rake

    Tines intermesh when closed. Notched tines for additional grip. Move wood, roots, waste without picking up soil. Seperate loose material.To suit telehandler and loader complete with brackets.

Products by McConnel Limited - a member of the Alamo Group

  • Power Arms

  • Swingtrim - Power Arm Mower

    Swingtrim - Power Arm Mower

    A specialist Power Arm with an innovative swing-over action, McConnel’s Swingtrim comes equipped with a high-performance cutterbar, reach of up to 3.5m, and the freedom to cut on either side of the tractor. Compact, light and manoeuvrable, the Swingtrim has been created for contractors and local government teams working in the amenities, landscape, and ground-care sectors.

  • McConnel - Model 30-Series - Power Arm Mower

    McConnel - Model 30-Series - Power Arm Mower

    McConnel’s specialist compact Power Arm series combines the benefits of a light, fuel-efficient design with outstanding manoeuvrability and precision. Offering a choice of reach from 3.4m to 4.3m and deceptively powerful 30hp hydraulics, 30-series Power Arms can be fitted to a wide range of utility vehicles and compact tractors. The PA3430 and PA4330 can be mounted to the front or rear, while the PA3530 model is front-mounting only.

  • Rotary Mowers

  • Stripe - Model SM 220 & 260 - Rotary Mower

    Stripe - Model SM 220 & 260 - Rotary Mower

    A high-performance rotary mower designed for fine-turf applications such as golf-courses, parks and urban green areas, the Stripe Mower delivers an attractive finish that makes it ideal for the amenities and ground-care sectors.   

  • McConnel - Model SE Series - Rotary Mower

    McConnel - Model SE Series - Rotary Mower

    A light, durable, and highly manoeuvrable rotary mower that offers a solid combination of performance and value for farmers and contractors. Available in three different working widths from 1.5m to 2.1m, the SE series is highly flexible and can be used in a wide variety of green maintenance jobs from park maintenance to pasture topping. Robust and reliable, SE series machines are equipped with a range of features to boost performance, safety and...

  • McConnel - Model PT Series - Rotary Mower

    McConnel - Model PT Series - Rotary Mower

    Productivity and value are what define McConnel’s range of PT Toppers. With a choice of working widths from 1.8m to 2.7m, an entry-level offset model and PTO overrun protection, the range is ideal for those seeking a productive and reliable topper at a competitive price.

  • Flail Mowers

  • Magnum Elite - Flail Mower

    Magnum Elite - Flail Mower

    A robust and productive series of flail mowers with a powerful cutting action that’s ideal for tackling grass, crop residues and tree cuttings. Created for farmers, contractors and local government, the Magnum Elite series offers four different cutting widths from 1.9m to 2.7m and  can tackle material up to 50mm thick – making it an ideal tool for a wide variety of green maintenance tasks. A strong main frame and reinforced...

  • Magnum Euro - Flail Mower

    Magnum Euro - Flail Mower

    Tougher, stronger and more productive than the popular Magnum Elite Series, McConnel’s Euro machines offer a choice of 2.3m, 2.45m, and 2.8m cutting widths and make light work of material up to 50mm thick. Designed for professionals, the Euro series can tackle grass, bushes and maize stubble giving it a versatility that is much sought after by large-scale farmers, contractors, and local government teams. Created to thrive on a busy workload, the...

  • Arable Machinery

  • McConnel - Seedaerator

    McConnel - Seedaerator

    The McConnel Seedaerator delivers single-pass drilling straight into previous crop residues - saving time, money and fuel, while maintaining crop yields in even the most challenging weather and soil conditions. By cultivating only the seeding zone, the Seedaerator ensures the adjoining soil structure is left undisturbed and crop residue remains on the surface. This creates the perfect conditions for a living biotic soil to thrive and delivers...

  • McConnel - Model 7400 - Rakaerator

    McConnel - Model 7400 - Rakaerator

    Featuring a 7.4m working width; three-point linkage (CAT II and CAT III); and fast, effective hydraulic folding for safe transport, the RAKAERATOR has been created for farmers and contractors as the perfect complement for McConnel’s new low-disturbance SEEDAERATOR drill. With its low horsepower requirements, wide working width and a working speed of up to 25 km/h, the Rakaerator is one of the most productive rakes on the market.

  • Grassland Machinery

  • McConnel - Spring Harrow Rakes

    McConnel - Spring Harrow Rakes

    For better organic farming, the Spring Tine Harrow will rejuvenate pasture; scatter manure; clear out moss, thatch and weeds; and aerate field crops, weeds and fine tills. Available in four different working widths from 3.00m to 6.00m, the harrows boast a contour-following floatation system, are equipped with up to 252 8mm tines, and feature easy to adjust tine angles and working heights.

  • Grassland and Arable Subsoilers

    Grassland and Arable Subsoilers

    Cost effective subsoil solutions,Twose Classic Line grassland and arable subsoilers are invaluable tools in soil conditioning and have been specially designed to relieve compaction, aid drainage, and deliver an improved crop yield. Available in 2.50m and 3.00m working widths, the new subsoilers come in two, three or five leg configurations. Top of the range models featurehydraulic auto-reset legs and can be specified with discs. Arable and grassland...

  • Material Handling

  • McConnel - Bale Handlers

    McConnel - Bale Handlers

    Whether you’re looking for a round or square bale handler, Twose has the ideal solution for you. Made from super-strength steel, the bale handlers are simple to use and are available with or without Euro 8 brackets. A choice of 10 different models is available with larger models offering adjustable arms and grabs for extra manoeuvrability

  • McConnel - Model CG - Cutter Grabs

    McConnel - Model CG - Cutter Grabs

    With powerful hydraulic rams, wide jaws and razor-sharp cutting blades, Twose Cutter Grabs have an impressive ‘bite’ that allow you to tackle silage quickly and effectively

Products by Strimech Engineering Ltd.

  • Agriculture

  • Strimech - Heavy Duty Twin Bale Spike

    Strimech - Heavy Duty Twin Bale Spike

    Heavy Duty Twin Bale Spike The Twin Bale Spike comes with 4 spring steel tines that can be moved to suit the customers requirements. The versatility of the spike enables you to handle either Hesston, Square or a single Round Bale.

  • Strimech - Heavy Duty Contractor Fork and Grab

    Strimech - Heavy Duty Contractor Fork and Grab

    Heavy Duty Contractor Fork & Grab This contractor fork and grab is designed for a multitude of applications including manure handling, green waste and general contracting work. The contractor fork has a filled in back to keep materials away from the headstock. This product comes either with or without the claw.

  • Strimech - Multibale Handler

    Strimech - Multibale Handler

    Multibale Handler The multibale handler is the perfect choice for a multitude of different bale handling needs. This bale handler will handle 2 Hesstons 1200mm x 1200mm, 3 Hesstons 800mm x 800mm, 4 Quadrants 1200mm x 700mm and 6 mini Quadrants 1200mm x 450mm. This bale handler comes with a extendable rear frame to offer greater stabilization when handling larger loads. 

Products by Lucas G

  • Mixing

  • Sel Propelled Vertical Auger Mixer

    Sel Propelled Vertical Auger Mixer

    The range of self-propelled mixers Lucas G is composed by six models from 12 to 24 m3. These self-propelled wagons have been developed to meet individual users and co-operatives expectations. Equipped with a motor of the latest generation – Tier 4 Final, these motor are well-known for their fuel efficiency. The load distribution (55 % front – 45 % rear) of the machine has been taken in count during the design to offer a perfect road...

  • Bedding

  • Spirmix Trampilla - Model 12 - 14 m³ - Mixer Wagon - Vertical Auger Diet Feeder

    Spirmix Trampilla - Model 12 - 14 m³ - Mixer Wagon - Vertical Auger Diet Feeder

    The Spirmix diet feeders 12 – 14 m3 are equipped with a vertical stepped auger that brews and aerates the mixture, they can feed about 60 to 90 dairy cows per pass. The rolled tank of the mixer feeder gives various advantages, it reduces the power required for making a mixture; the flared and smooth shape makes the ration homogeneous more rapidly. Easy to use, the Spirmix mixer feeders are perfectly suited to rations consisting mostly of silage....

  • Spirmix Trampilla - Model 16 - 18m³ - Mixer Wagon - Vertical Auger Diet Feeder

    Spirmix Trampilla - Model 16 - 18m³ - Mixer Wagon - Vertical Auger Diet Feeder

    The Spirmix diet feeders 16 – 18 m3 are equipped with vertical stepped augers that brew and aerate the mixture, they can feed about 85 to 120 dairy cows per pass. The rolled tank of the mixer feeder gives various advantages, it reduces the power required for making a mixture; the flared and smooth shape makes the ration homogeneous more rapidly. Easy to use, the Spirmix mixer feeders are perfectly suited to rations consisting mostly of silage....

  • Castor - Model G - Silage Loader Feeder Straw Bedder

    Castor - Model G - Silage Loader Feeder Straw Bedder

    The range of silage feeders Castor G is composed by four models from 4 to 8 m3 capacity. These machines are equipped with rounded claw to unload the silage and ensure a simple and clean load of silage, once loaded the distribution is made by the turbine. The straw blowing and distribution assembly comes from the CASTOR range, recognized for its performance and reliability; is composed by a mechanical shredder, V-shape knives and chute cut-off plate...

  • Silage Unloading

  • Castormix - Silage Unloader Recirculating Feeder & Straw Bedder

    Castormix - Silage Unloader Recirculating Feeder & Straw Bedder

    The range of recirculating mixer feeder and straw bedder Castormix is composed by four models from 6 to 18 m3. The two little models (60 & 80) are equipped with rounded claw to unload the silage and ensure a simple and clean load of silage. The recirculating mixers Castormix are versatile machines to achieve all feeding applications; the mixing by recirculating process, the distribution of the ration and the straw bedding of livestock buildings....

  • Balle Unroller

  • Model UBI - Bale Unroller

    Model UBI - Bale Unroller

    The bale feeders UBI and UBI Swivelling are standard equipped with tilting body to allow an efficient unrolling of Hay / Straw / Wrapped / Alfalfa. The loading arm is adjusted hydraulically for handling different diameters of bales. The bale unrollers are hitched on the 3 point of the tractor, UBI distributes on the right side, UBI swivelling 180° distributes on the right or left side or in the centre of the feeding corridor. These models can be...

Products by Browns Agricultural Machinery Co. Ltd

  • Bale Handling

  • SuperGrab - Bale Handler

    SuperGrab - Bale Handler

    The Supergrab is designed to handle round and square bales.  It has 10 curved side tines that grab the bales and allow them to be rotated for vertical stacking. The arms are controlled by two hydraulic rams to give a powerful grip and two conus 2 straight tines can be placed in the lower beam for extra support when handling Heston bales.  All pivot points are bushed with grease nipples and hoses are supplied with the grab. The grab can...

  • Buzzard - 8 Conventional Bales

    Buzzard - 8 Conventional Bales

    The name “Browns” has been synonymous with flat 8 bale grabs for over 50 years. Designed to handle conventional bales. It is hydraulically controlled and fitted with sixteen claws, fixed in a rugged steel frame with a single side bar to align the bales. It will fit most types of front loader.

  • Browns  - Hectavator Cultivator

    Browns - Hectavator Cultivator

    Rigid or Manual Folding.3-5hp power per leg required.2 peice tine constrution.Tines held on to beam by two bolts and nuts.Tine spacing 230mm (9'').Under beam clearance 635mm (23'').100mm (4'') reversible point as standard.Depth wheels fitted as standard (on codes 66085/90/95).Outrigger frame assembly c/w tines.Picture shows manual fold model

  • Grassland Equipment

  • Grassmaster - Model 2m - Spring Tine Grass Harrow

    Grassmaster - Model 2m - Spring Tine Grass Harrow

    Grass harrows are effective for maintaining and rejuvinating existing pastures.  The Browns Grassmaster removes dead grass, aerates the sward, helps prevent thatch and moss build up, encourages vigorous growth and breaks up/distributes manure and mole hills. The Browns Grassmaster can be used in conjunction with an air seeder for over seeding existing pastures or reseeding new pastures. Grassland is an important resource for the livestock farmer...

  • Sitmaster - Rigid - Model 1.5m - Grassland Aerator

    Sitmaster - Rigid - Model 1.5m - Grassland Aerator

    The Browns Slitmaster Grassland Aerator can help eleviate surface compaction by spiking the ground and opening up the soil to allow air, water and nutrients to enter the soil thus improving soil health and drainage. Combine with a roller to leave a cleaner finish or a harrow attachment to remove thatch whilst slitting. Grassland is an important resource for the livestock farmer and maintaining high quality, low input and low cost grassland for grazing...

  • Slitmaster  - Hydraulically Folding Grassland Aerator

    Slitmaster - Hydraulically Folding Grassland Aerator

    The Browns Slitmaster Grassland Aerator can help eleviate surface compaction by spiking the ground and opening up the soil to allow air, water and nutrients to enter the soil thus improving soil health and drainage. Combine with a harrow attachment and/or seeder for a complete pasture rejuvenation solution.  The slitter can be front mounted to enable use with muck spreaders and/or other trailed machinery.  Grassland is an important resource...

  • Subsoilers / Moledrainers

  • Viscount  - Model MK5 - Moledrainer / Subsoiler

    Viscount - Model MK5 - Moledrainer / Subsoiler

    Wet soils in the UK are a common problem and while surface drainage can remove excess surface water, it is the soil profile itself that needs to be drained in many situations. This allows the pastures and crops to reach their potential production and stock damage by treading and compaction to be reduced.

  • Consort - Heavy Duty Moledrainer / Subsoiler

    Consort - Heavy Duty Moledrainer / Subsoiler

    Wet soils in the UK are a common problem and while surface drainage can remove excess surface water, it is the soil profile itself that needs to be drained in many situations. This allows the pastures and crops to reach their potential production and stock damage by treading and compaction to be reduced.

  • Post Hammers

  • Swinground - Tractor Mounted Manual Swinground Posthammer

    Swinground - Tractor Mounted Manual Swinground Posthammer

    Cat 2 three point linkage. Weight of hammer 200kg. Mast angle adjusted with a turnbuckle. Simple pin action to position swinground into five positions. Rubber topped post cap protects posts. Spirit level on mast for straight driving. Adjustable legs on mainframe and mast

  • Timber Equipment

  • Woodworker Table

    Woodworker Table

    The Woodworker table has horizontal bed action with spring return.  The Woodworker is designed with safety in mind.  They can be supplied fitted with either a GP (General Purpose) blade or TCT (Tungsten carbide Tipped) blade.  The bench is supplied with cross cut/logging guide and a guard manufactyred to the latest health and safety legislation.

  • Yard Scrapers

  • Yardmaster - Muck Scraper

    Yardmaster - Muck Scraper

    Browns Yardmaster muck scrapers have been designed to leave a clean, hygienic and non-slippery surface to livestock buildings and yards.  There are three models available to satisfy different conditions which are fully galvanized to protect from corrosion. The Economy Yardmaster has a 30mm rubber  blade which has good flexibility for use on smoother/flat surfaces. The Extruded Yardmaster has a 50mm rubber blade that has increased durability...

Products by Charles J Marshall (Aberdeen) Ltd

  • Silage / Grain Trailers

  • Marshall - Model QM/6 - Entry Level Monocoque Trailer

    Marshall - Model QM/6 - Entry Level Monocoque Trailer

    The Marshall QM/6 is the entry level monocoque trailer in our range, but still has the same build and level of engineering that goes into all our trailers. The construction of the body is extremely robust, with 3.5mm sides and a 5mm flat floor ensuring the trailer can handle demanding work. The flat floor also prevents premature rusting of the trailer, since there are no joints for water to sit in. Furthermore the generous number of bearers and...

  • Marshall - Model QM/8 - Silage / Grain Trailers

    Marshall - Model QM/8 - Silage / Grain Trailers

    The Marshall QM/8 is an extremely popular trailer in farming areas with narrow roads and lanes. The large cubic capacity of the trailer means it has room to carry a significant load, but remains small enough to easily manoeuvre. The QM/8 also has the advantage of tandem axles, giving the customer the option to spec either rockers or springs as a no cost option. The body is constructed with 3.5mm sides and a 5mm flat floor, complete with a substantial...

  • Drop-Side Trailers

  • Marshall - Model S/2 - Drop-Side Agricultural Trailers

    Marshall - Model S/2 - Drop-Side Agricultural Trailers

    The smallest model of trailer we produce is the S/2 drop side trailer, which is perfectly sized for use in the leisure industry, in gardens or on smallholdings. However it is still built to Marshall Trailers’ high, exacting standards to guarantee durability and functionality.

  • Flat / Bale Trailers

  • Marshall - Model BC/18 - Agricultural Flat / Bale Trailers

    Marshall - Model BC/18 - Agricultural Flat / Bale Trailers

    The Marshall BC/18 is the most compact model in our bale trailer range, providing excellent maneuverability for narrow lanes and tight spaces. It has box section bearers and runners which provides exceptional strength and prevents water from prematurely rusting the trailer. The strength of the trailer is further enhanced by heavy-duty channels forming a square chassis that extends the length of the trailer and also reduces flexing when loading the...

  • Feed Trailers

  • Marshall - Model FT/15 - Agricultural Feed Trailers

    Marshall - Model FT/15 - Agricultural Feed Trailers

    The Marshall feed trailer range combines a unique, practical design with exception built quality. In addition all our feed trailer have a number useful features integrated into the design including a timber slatted floor, removable drawbar, swinging taildoor and angled sides to assist feeding. This 15' trailer has 32 feed spaces and 11.5 x 15 - 10ply tyres.

  • Livestock Trailers / Containers

  • Marshall - Model 21 - Agricultural Livestock Trailers

    Marshall - Model 21 - Agricultural Livestock Trailers

    Marshall trailers has a number of products for transporting cattle and sheep; all built to an extremely high standard with functionality and practicality at the core of the designs. The convenience of having your own Marshall livestock container will surprise even the most sceptical of owners. Just think of the numerous times you have left stock grazing in a depleted pasture as you try to maximise the use of a pre booked haulier. With the rising...