HJR AGRI Oswestry

45 products found

Products by Bomford Turner Limited

  • Bomford Arm Mowers

  • MicroKlippa  - Arm Mowers

    MicroKlippa - Arm Mowers

    The MicroKlippa is very popular with estate managers and horticulturalists who admire the MicroKlippa's fine cutting capabilities when hedge trimming and the versatility of the right or left hand cutting. Features Include, 

  • Flail Mowers

  • Bomford Turbo - Model VM1600 - Flail Mowers

    Bomford Turbo - Model VM1600 - Flail Mowers

    The Turbo VM flail mower is specifically designed for verge mowing over long sustained periods.  1.6m and 2.0m cutting widths. Plus 90 deg to minus 50 deg cowl angling . Direct drive through twin pivoting gearboxes. 750mm offset. Cat II three point linkage. Front mountable.

  • Bomford Bandit  - Trailed Flail Mower

    Bomford Bandit - Trailed Flail Mower

    The Bandit trailed flail mower is aimed at professional users where efficiency and finish are a must. The Bomford Bandit mower range is built to withstand the toughest working conditions, but also simpler grounds maintenance and grass cutting, and it manages to remain manoeuvrable when mowing tight up to walls, so provides a professional finish both in tough conditions and when manoeuvrability is restricted . The flexible design of the Bandit allows...

  • Bomford - Model CTVM - Flail Mower

    Bomford - Model CTVM - Flail Mower

    Developed to meet the demands of local authorities for parks and municipal areas when grass cutting, the CTVM has a cutting width of 1.6m variable cutting height from 8mm to 130mm, a mountable kerb height of 355mm, sealed bearings, pressed scoop flails and weighs in at 300kg allowing the flail mower to work in different conditions, both on and off road. The new Bomford CTVM FLAIL MOWER has twin V belt drive and has interchangeable mounting arms to...

  • Toppers

  • Bomford - Model RS - Rotary Slasher

    Bomford - Model RS - Rotary Slasher

    The Rotary Slasher range offers uncompromising topping through simple robust technology. The mower is Suitable for grass cutting, sports ground topping and other similar tasks.

  • Bomford - Model TB - Twin Blade Mower

    Bomford - Model TB - Twin Blade Mower

    The new more robust Bomford Twin Blade is a flexible, efficient, in-line or offset topper. The Twin Blade grass topper is perfect for paddocks and headlands.

  • Bomford - Model 3000 - Tri-Blade Mowers

    Bomford - Model 3000 - Tri-Blade Mowers

    The Tri-Blade mowers are heavy duty and robust.  Three sets of newly designed heavy duty timed blades ensure strip free cutting, with adjustable cutting height of between 25mm(1') and 225mm (9') the Bomford Tri-Blade 3000 offers superb versatility, which makes them ideal for sports ground and field topping.  Driven through 1000 rpm independent gearboxes with rubber pto shaft couplings to offer further protection against debris impact the...

  • Bedding & Feeding

  • Bomford - Sila-Bed Mower

    Bomford - Sila-Bed Mower

    The Bomford Sila-Bed distributes the material for bedding quickly and efficiently leaving a thick aerated bed of straw. Available with 300 degree swivel chute or new side chute option for faster delivery of silage. The Sila-Bed's reversible conveyor is driven from a hydraulic motor through a chain drive. The blade-carrying rotor and paddle-turbine are shaft driven by the two speed gearbox. The straw is delivered into the rotor blades, cut and fed...

  • Heads

  • Bomford Pro-Cut - Head

    Bomford Pro-Cut - Head

    The Bomford Pro-Cut range is heavier duty and offers double helix shaft technology delivering up to 45% overlap of the flails and belt driven protection against unseen debris when close cutting in hedge trimming. There are interchangeable shaft options allowing speedy flail change times.

  • Rotary Head

    Rotary Head

    The Bomford Rotary head is ideal for longer material with a choice of Blade or HD chain cutting options, operating in either vertical plane or horizontal plane.Its 2.25m sq cutting area makes short work of even the most challenging of tasks

  • Ditch Cleaner

    Ditch Cleaner

    The Bomford Ditch Cleaner head is both compact, powerful and capable of operating in wet or dry conditions. The Bomford Ditch cleaner can be turned through 90 degrees and used to clean existing roadside 'grips' and can be changed from left to right operation in minutes with a choice of blades or cutting teeth. The ditch cleaner head comprises of a 660mm diameter rotary cutting head, that is powered by a multi-stroking radial piston motor. Depending on...

Products by B. Strautmann & Söhne GmbH u. Co. KG

  • Picking-up Technology

  • Model GS - Silage Buckets

    Model GS - Silage Buckets

    The bucket can be used to pick up both silage and bulk materials without any problems. The robust design with a scraping edge made of Hardox ensures a long service life. The tines of the toothed bar which are pointed on four sides enable easy penetration of solid silage.

  • Block / Fodder Distribution Wagon

  • Model BVW - Block Distribution Wagon

    Model BVW - Block Distribution Wagon

    The block distribution wagon (BVW) can be used to benefit from the advantages of the removal of stocks. If you store the silo blocks outside the stable on a paved surface, they can be picked up there and distributed in the stable by means of the BVW. Thus, the BVW closes the gap within the mechanisation chain between silo and trough. The block distribution wagon enables clean picking-up of silage blocks picked-up as a reserve, and their transport...

  • Model FVW - Fodder Distribution Wagon

    Model FVW - Fodder Distribution Wagon

    Four different sizes, from 10 - 16 m3, are available. Whether equipped with front or rear distribution unit, all FVW models offer optimum distribution of the fodder in the stable. Due to the use of an additional mixing and dosing drum (optional equipment on the models FVW 100 / 100 H and 120 / 120 H), a mixing of the components can be reached when charging in layers.

  • Fodder Mixing Wagon

  • Verti-Mix - Model 400 / 500 - Fodder Mixing Wagon

    Verti-Mix - Model 400 / 500 - Fodder Mixing Wagon

    The Verti-Mix 400 / 500 series is the ideal opportunity for agricultural businesses to start cattle-friendly TMR-feeding. Particular importance was attached to compact dimensions and low-cost design when designing these fodder mixing wagons while maintaining proven reliability. This is why it is an ideal option to start TMR-feeding in particular for smaller businesses with restricted yard space.

  • Verti-Mix  - Model VM - Fodder Mixing Wagon

    Verti-Mix - Model VM - Fodder Mixing Wagon

    The patented container embossing at the top container edge provides the Strautmann mixing container with additional rigidity. It serves as basis for variable container attachments helping you to adapt the capacity of the mixing container to your operational requirements. Be among those who benefit from our more than 20 years of experience in fodder mixing technology and become one of our approx. 20,000 reference businesses!

  • Verti-Mix - Model L  - Fodder Mixing Wagon

    Verti-Mix - Model L - Fodder Mixing Wagon

    The patented container embossing at the top container edge provides the Strautmann mixing container with additional rigidity. It serves as basis for variable container attachments helping you to adapt the capacity of the mixing container to your operational requirements. Be among those who benefit from our more than 20 years of experience in fodder mixing technology and become one of our approx. 20,000 reference businesses!

  • Manure Spreader

  • Model BE 4  - Manure Spreader

    Model BE 4 - Manure Spreader

    The outstanding feature of the Strautmann spreaders is their perfection down to the last detail. Due to decades of experience in manufacturing spreaders and high quality awareness, the Strautmann spreaders are among the best in their classes.

  • Model MS 1201-1401  - Manure Spreader

    Model MS 1201-1401 - Manure Spreader

    The MS spreader series represents the advanced development of the proven BE spreader models. With the all-steel trough now being powder-coated, the MS spreader models are a perfect complement to the Strautmann spreader portfolio. Solid spreading units with a high level of distribution accuracy ensure great operational safety and long service life.

Products by Browns Agricultural Machinery Co. Ltd

  • Bale Handling

  • SuperGrab - Bale Handler

    SuperGrab - Bale Handler

    The Supergrab is designed to handle round and square bales.  It has 10 curved side tines that grab the bales and allow them to be rotated for vertical stacking. The arms are controlled by two hydraulic rams to give a powerful grip and two conus 2 straight tines can be placed in the lower beam for extra support when handling Heston bales.  All pivot points are bushed with grease nipples and hoses are supplied with the grab. The grab can...

  • Buzzard - 8 Conventional Bales

    Buzzard - 8 Conventional Bales

    The name “Browns” has been synonymous with flat 8 bale grabs for over 50 years. Designed to handle conventional bales. It is hydraulically controlled and fitted with sixteen claws, fixed in a rugged steel frame with a single side bar to align the bales. It will fit most types of front loader.

  • Grassland Equipment

  • Grassmaster - Model 2m - Spring Tine Grass Harrow

    Grassmaster - Model 2m - Spring Tine Grass Harrow

    Grass harrows are effective for maintaining and rejuvinating existing pastures.  The Browns Grassmaster removes dead grass, aerates the sward, helps prevent thatch and moss build up, encourages vigorous growth and breaks up/distributes manure and mole hills. The Browns Grassmaster can be used in conjunction with an air seeder for over seeding existing pastures or reseeding new pastures. Grassland is an important resource for the livestock farmer...

  • Sitmaster - Rigid - Model 1.5m - Grassland Aerator

    Sitmaster - Rigid - Model 1.5m - Grassland Aerator

    The Browns Slitmaster Grassland Aerator can help eleviate surface compaction by spiking the ground and opening up the soil to allow air, water and nutrients to enter the soil thus improving soil health and drainage. Combine with a roller to leave a cleaner finish or a harrow attachment to remove thatch whilst slitting. Grassland is an important resource for the livestock farmer and maintaining high quality, low input and low cost grassland for grazing...

  • Slitmaster  - Hydraulically Folding Grassland Aerator

    Slitmaster - Hydraulically Folding Grassland Aerator

    The Browns Slitmaster Grassland Aerator can help eleviate surface compaction by spiking the ground and opening up the soil to allow air, water and nutrients to enter the soil thus improving soil health and drainage. Combine with a harrow attachment and/or seeder for a complete pasture rejuvenation solution.  The slitter can be front mounted to enable use with muck spreaders and/or other trailed machinery.  Grassland is an important resource...

  • Subsoilers / Moledrainers

  • Viscount  - Model MK5 - Moledrainer / Subsoiler

    Viscount - Model MK5 - Moledrainer / Subsoiler

    Wet soils in the UK are a common problem and while surface drainage can remove excess surface water, it is the soil profile itself that needs to be drained in many situations. This allows the pastures and crops to reach their potential production and stock damage by treading and compaction to be reduced.

  • Consort - Heavy Duty Moledrainer / Subsoiler

    Consort - Heavy Duty Moledrainer / Subsoiler

    Wet soils in the UK are a common problem and while surface drainage can remove excess surface water, it is the soil profile itself that needs to be drained in many situations. This allows the pastures and crops to reach their potential production and stock damage by treading and compaction to be reduced.

  • Post Hammers

  • Swinground - Tractor Mounted Manual Swinground Posthammer

    Swinground - Tractor Mounted Manual Swinground Posthammer

    Cat 2 three point linkage. Weight of hammer 200kg. Mast angle adjusted with a turnbuckle. Simple pin action to position swinground into five positions. Rubber topped post cap protects posts. Spirit level on mast for straight driving. Adjustable legs on mainframe and mast

  • Timber Equipment

  • Woodworker Table

    Woodworker Table

    The Woodworker table has horizontal bed action with spring return.  The Woodworker is designed with safety in mind.  They can be supplied fitted with either a GP (General Purpose) blade or TCT (Tungsten carbide Tipped) blade.  The bench is supplied with cross cut/logging guide and a guard manufactyred to the latest health and safety legislation.

  • Yard Scrapers

  • Yardmaster - Muck Scraper

    Yardmaster - Muck Scraper

    Browns Yardmaster muck scrapers have been designed to leave a clean, hygienic and non-slippery surface to livestock buildings and yards.  There are three models available to satisfy different conditions which are fully galvanized to protect from corrosion. The Economy Yardmaster has a 30mm rubber  blade which has good flexibility for use on smoother/flat surfaces. The Extruded Yardmaster has a 50mm rubber blade that has increased durability...

Products by Conor Engineering Ltd.

  • Slurry Tankers

  • Conor - Standard Tankers

    Conor - Standard Tankers

    The standard range of slurry tanks come in 1100 gallon to 2100 gallon. They come mounted on a rigid drawbar and heavy duty ADR axle with a range of wheel options. Wheel options include 385/65 R22.5, 425/65 R22.5, 1300 x 530 x 508 BN3 and 21.3 R24. The high quality 8000 litre Battioni vacuum pump comes as standard with a secondary trap (with drain tap) to protect the pump as standard also.

  • Conor - Semi Recessed Tankers

    Conor - Semi Recessed Tankers

    The Conor range of semi recessed tanks is the same as the standard range of tanks except with bigger tyre options. The size of tanks range from 1100 to 2100 gallons and the cylinder is recessed into and strengthened to allow for the bigger tyre. This range of tanks also comes with 20 foot of suction hose in lieu to 15 foot as standard. This range of tanks is ideal for customers who farm wet land and need the low ground pressure tyre but do not need a...

  • Conor - Fully Recessed Tankers

    Conor - Fully Recessed Tankers

    The Conor range of fully recessed LGP tankers are strong and robust and built with the contractor and large producer in mind. Sizes range from 1600 Gallon up to 3000 Gallon and comes with many features as standard such as large 30” rear door, 11000 litre vacuum pump, 20 foot suction hose, full commercial axles with 420 x 180 brakes, LED road lighting, and swivel hitch eye. As with all Conor tanks the cylinder is strengthened with anti-implosion...

  • Conor - Tandem Axle Tankers

    Conor - Tandem Axle Tankers

    Conor tandem axle tanks are designed and built with strength and safety in mind. The unique chassis design and tandem parabolic suspension keeps the overall height low and gives excellent stability. The high speed parabolic suspension and strong chassis are ideal for travelling at high speed. A large range of wheel options are available to choose from and air brakes load sensing and rear steering is also available as optional extras. Please take note...

  • Conor - Slootsmid Trailing Shoe

    Conor - Slootsmid Trailing Shoe

    The Conor Slootsmid Trailing shoe system has been developed with a robust and practical design to operate in all types of terrain. The tank, the trailing shoe and the axle are integrated as closely as possible which gives excellent balance and maneuverability. The trailing shoe has a fully galvanized body and a powerful hydraulic macerator which chops up any fibrous material. Its working width ranges from 5 to 9 meters and has a transport width of...

  • Conor - Economy Trailing Shoe

    Conor - Economy Trailing Shoe

    The Conor Economy Trailing shoe system has been developed with a robust and practical design to operate in all types of terrain. It has a simple lightweight design and is designed very close to rear of tank and can fit on any tank. It allows for the even application of slurry which contributes to even growth. It greatly increases grass yield in land which has major advantages for all farmers.

  • Diet Feeders

  • Conor  - Vertical  Feeders

    Conor - Vertical Feeders

    The Conor Vertical Feeder has been developed to incorporate the key qualities that accompany all Conor Machinery – strength, reliability and simplicity. Its robust simplistic design promotes a problem free lifespan and its design ensures a consistent mix which offers high nutritional value and improved yield. It is designed to handle all types of feed efficiently to produce a top quality mix. The end result for the farmer being improved...

  • Side Spreaders

  • Conor  - Model 750 - Side Spreader

    Conor - Model 750 - Side Spreader

    The Conor side spreader is one of the strongest and most durable on the market today. It is built to operate in the most demanding of conditions and can handle a wide range of manure from solid to slurry. Conor side spreaders come in 4 models , the 400, 750, 900 and 1000. Heavy duty bearings are used and an 150mm balanced heavy wall rotor ensure maximum strength and balanced unloading. A protective timber rail is used to prevent loading damage and all...

  • Swathers

  • Conor - Model 7000  - Swather

    Conor - Model 7000 - Swather

    The Swather 7000 has been developed by Conor Engineering to aid farmers in improving the quality of grass, hay and straw. The Swather gently turns, lifts and aerates the material giving a higher drier swath helping the farmer get the most from short spells of fine weather. This leads to a better quality of hay, silage or straw; therefore a better quality of feed. The swather has a strong, robust design which is built to suit Irish conditions.

  • Toppers

  • Conor  - Model 6000  - Offset Pasture Topper

    Conor - Model 6000 - Offset Pasture Topper

    The Conor 6000 Semi Offset Pasture Topper is a rear 3pt linkage machine. The Pasture Topper is semi offset when in the topping position and rides independently of the tractor allowing a clean cut of uneven pasture,The topper can be powered by relatively low powered tractors (40 H.P. upwards). The direct drive mechanism guarantees consistent performance at all times.The cutting height is adjusted by setting the slides on either side of the topper. A...

Products by Nugent Engineering

  • Engineering Equipments

  • Nugent - Grass Toppers

    Nugent - Grass Toppers

    6’ semi off set design. Manufactured to the highest specification using heavy gauge steel. Unique blade carrier specially designed from spring steel. P.T.O shaft is fitted with shear bolt and double run clutch. Adjustable level of cutting 1” to 7”. Fitted with comer gear boxes. A Frame designed for optimum safety, with blades 12 inches away from the edge

  • Bale Handling Equipment

  • Nugent - Duo Bale Attach

    Nugent - Duo Bale Attach

    The Nugent Duo Bale Attach joins the robust, versatile range of Bale Handling Equipment. The Nugent Dual Bale Attach allows wrapped bales to be moved safely and efficiently. Using two Heavy Duty Bale Lifters, the Attach allows independent movement of each lifter for simple collection. The Bale Lifters can be dismounted in minutes and attached directly to the back of a tractor on 3-point linkage.

  • Trailers

  • Nugent - Model T-Line - Tipper Trailers

    Nugent - Model T-Line - Tipper Trailers

    The Nugent T-Line is the latest range of Tipper Trailers designed and manufactured for the demanding professional. With full type approval (ECWVTA) it is manufactured with a strong fully welded and galvanised chassis ensuring maximum strength and durability, load capacity, flexibility and safety. Innovative chassis design, combined with all round easy access, excellent tipping angle, drop sides and years of trailer design expertise have produced the...

  • Livestock Trailers

  • Nugent - Livestock Trailers

    Nugent - Livestock Trailers

    The Nugent Livestock Trailer Range is engineered and hand built to last, setting it apart from any other livestock trailer on the market. With full type approval (ECWVTA) any farmer will appreciate the attention to detail including the fully welded galvanised chassis, cross member frame bracing the trailer for added strength, durable 650 tyres, leaf spring, solid beam axles and commercial lights offering superior build quality, strength, longevity and...

  • Nugent - Small Livestock Trailers

    Nugent - Small Livestock Trailers

    The Nugent Small Livestock Trailer includes a choice of two models with maximum gross weights of 1400 and 2000kg and the standard design includes plenty of desirable features.