Irritrol Systems Europe S.r.l

7 products found


  • Controllers

  • Junior - Model  DC - Controller

    Junior - Model DC - Controller

    Use one 9V Alkaline battery to operate the controller. Output to solenoid is 12V. Operates 9 volt valves with latching solenoid, 2wires, 2 or 3 ways.

  • Electronic Tap Timer

    Electronic Tap Timer

    Electronic Tap Timer, the Irritrol batterypowered single-station control unit with a built-in solenoid valve, very simple to use. Connectable to a normal tap, it can be installed on any terrace or balcony without needing any special materials or equipment. It is also equipped with acover to protect the display and a gasket for the battery for protection against atmospheric agents. The programming is simple and quick, also providing the...

  • Valves

  • Euro  - Model F and M - Valves

    Euro - Model F and M - Valves

    Male and female thread 3/4', 1', 1 1/4'. Globe configuration. Body and bonnet in Nylon reinforced with fiberglass (30%). The F and M series is a complete range valves that are very easy to install and use. A historical range for Irritrol who has always guaranteed high performance and reliability

  • Model E-Pic - Valves

    Model E-Pic - Valves

    E-pic is the new Irritrol valve specially designed for small residential irrigation systems. In fact, the guaranteed low flow rates, its small size and extremely easy maintenance make it the best choice for these applications

  • Sprayheads

  • Model I-PRO Series - Sprayheads

    Model I-PRO Series - Sprayheads

    Pressure-activated seal with lubricant additive. Pre-installed in-riser pressure regulator (optional). Pre-installed check valve (optional). Retrofittable riser. Sturdy and robust, textured body. Side and bottominlets on 6” and 12” (6” also available in non-side inlet). Heavy-duty, stainless steel retraction spring. Male-threaded riser. Pre-installed flush plug. Ratcheting riser

  • Model  SL series  - Sprayheads

    Model SL series - Sprayheads

    Compact slimline body design. Available with pre-installed Variable Arc Nozzles in four radii (10', 12', 15' and 17'). Matched precipitation rate nozzles provide even coverage. Adjustable arc patterns from 25°-360°. Debris labels on models without nozzles for easy flushing. Pressure-activated seal reduces flow-by during pop up and keeps debris away from stem during retraction. Heavy-duty, stainless steel retract spring ensures positive pop...

  • Rotors

  • Model 430R - Rotors

    Model 430R - Rotors

    Familiar top adjustment, wet or dry. Reversing full and part circle operation. Pressure operated wiper seal. Wide selection of nozzles. Ability to quick check the arc. Ratcheting riser. Fixed right stop. Ideal for low flow application. Stainless steel adjustment screw