KJ Klimateknik A/S

6 products found

Products

  • Power Saving EC Motors

    Power Saving EC Motors

    With EC motors, you can save large sums on your electricity bill. By comparison to at Triac regulated ventilation system, you may save up to 70 %. In a new ventilation system, the additional price is minimal. The EC motor can be installed in all existing systems - the payback period is typically about 3 years. The EC motors are very pressure stable. This means that the pressure conditions in the barn are stabilized when the ventilators are running at...

  • Air Inlet Valve

    Air Inlet Valve

    Air inlet valve designed for installation in the ceiling. This execution however, is especialle suitable for installation above corridors. The vertical airstream from the inlet guides the relative cold incoming air to the corridor - preventing it to drop directly on the animals. This inlet is often used in conjunction with diffuse ventilation system. The inlet opens in warm periods. In cool periods vented through the ceiling insulation - headliner....

  • Model REA-720-1050-1600-1800 - Ceiling Inlets

    Model REA-720-1050-1600-1800 - Ceiling Inlets

    KJ ceiling inlets are used as air inlets from loft spaces into the barn. The ceiling inlets may form the entire air intake of the ventilation system, or they can be a supplement for, for instance, wall inlets, in cases where the barn is built immediately next to other buildings. Another possibility is to build the ventilation system as a so-called combi-diffuse system.At low ventilation degrees, the air intake of the barn goes through the...

  • Model REA - Wall Inlets

    Model REA - Wall Inlets

    The wall inlet is used for regulating the intake air of the stable. It is built into the wall and placed according to its use, usually with the upper edge of the inlet 25-30 cm below the ceiling. The REA inlet is equipped with a bottom-hinged flap, which provides a good control of the air towards the ceiling so that drafts in the stys are avoided.

  • ErgoMat - Model XL - Feeding Automats

    ErgoMat - Model XL - Feeding Automats

    The trough is with its oval shape designed, so that the pigs have a short and easy access to the drinking nipples. The feeder has a large feeding plateau in the middle. By pushing the steel pipe in the middle, the animals can easily dose the feed in appropriate quantities. The trough is made of rust and acid resistant polyester concrete. The rounded surface makes it easy to keep clean. There is no space between trough and floor, so there is no...

  • Model XXL - Feeding Automat

    Model XXL - Feeding Automat

    The trough is with its oval shape designed, so that the pigs have a short and easy access to the drinking nipples. The feeder has a large feeding plateau in the middle. By pushing one of the two steel pipe in the middle, the animals can easily dose the feed in appropriate quantities. The trough is made of rust and acid resistant polyester concrete. The rounded surface makes it easy to keep clean. There is no space between trough and floor, so there is...