23 products found

products

• Zero Turn Vacs

• 

  452, 452-D

  A 6.5HP Briggs and Stratton Intek I/C engine powers the air turbine for maximum air flow and pickup efficiency of grass clippings, leaves and light litter from mower discharge. The engine features throttle control, stop switch, ball bearing on the PTO side, electronic ignition, oil dipstick and durable low-tone muffler. Optional engines include the Briggs and Stratton 6.5 HP Intek Pro, Kohler CS 6HP, and Honda 5.5HP, engines.    ...

• 

  462-Z

  The Model 462-Z Trac Vac is designed for the zero-turn mower, the Model 462-Z is fully mounted, working as one with the mower, offering maneuverability around trees, flower beds and other obstacles. The frame is designed to allow for additional clearance for off-loading and is heavily designed for intensive use.

• 

  565-CKG

  The 6HP engine/blower assembly mounts directly to the frame of your stand on rider allowing both to work as a single unit. Handling around trees, shrubs, flower beds and other obstacles is excellent. The engine assembly has an 8' intake to reduce the chance of clogging. The 44 gallon Rubbermaid trashcan mounts directly over the deck, and is tough enough to handle the everyday abuse of commercial mowing.

• 

  Trac Vac 655

  The spring loaded double molded top lifts out of the way easily and has louvered top assemblies to direct air flow away from the operator. The Model 655 has a capacity of 20 cubic feet (16 bushels) to cut back frequency of dumping and down time. The perfect combination of speed and efficiency. The Model 655 comes standard with a 6.5HP Briggs and Stratton Intek I/C engine powering the air turbine for pickup efficiency of grass clippings, leaves...

• 

  Trac Vac 1060

  The model 1060 is powered by an 11HP Briggs and Stratton Industrial Plus engine. Features of the engine include throttle control, stop switch, ball bearings on the PTO side and a low tone muffler. The seventeen cubic foot cart, tapered to facilitate dumping and custom designed cart cover expands collection capacity to approximately 50 cubic feet. The cover is manufactured from 20 Ga. galvanized  steel, providing for years of rust free service....

• 3 Point Hitch Vacs

• 

  Trac Vac Model 662

  The Model 662 has a capacity of 20 cubic feet (16 bushels) to cut back frequency of dumping and down time. The perfect combination of speed and efficiency. The Model 662 comes standard with a 6.5HP Briggs and Stratton Intek I/C engine powering the air turbine for maximum air flow and pickup efficiency of grass clippings, leaves and light litter. The engine features throttle control, stop switch, ball bearing on the PTO side, electronic ignition, oil...

• 

  854, 854-BX and 856

  The Model 854 and Model 856 come standard with a 17 cubic foot dump cart tapered four inches front to back to allow debris to fall out quickly with little clogging. The 20 gauge all steel cart cover, galvanized for long life, expands capacity to approximately fifty cubic feet. Eight inch intake and exhaust hoses move leaves, grass clippings, and light litter with a less chance of clogging. The six-bladed forward curve turbine reduces noise to a...

Products by Nikkel Iron Works Corporation

• DARF

• 

  DARF - Model 917, 1017 - Overhead Rakes

  52' diameter HD rake wheels. 3/16' x 6' double tine rake tooth -  made in USA. Easy to use Rake Wheel Adjustments -  quick and accurate. Walking Beam Transport Axles. Twin sliding Overhead Frame -  gives additional strength & stability in rough fields. 'Quick Adjust' Leveling jack. Double lip and ball hitch clevis. Trailing mounted cranks -  allows more flotation of rake wheels . Anti wrap shield . Poly Shield.

• 

  DARF - Model 915BRP 3 - Point Mounted Rake

  Transport width: 13'6'. Weight: 2740 lbs. Heavy Duty tubing construction throughout. Versatility of three point hitch. All settings hydraulically controlled (open, close, up, down and swath). (15) 52' Diametor wheels. Poly Shield

• 

  DARF - Model 913HBRP - V-Rake

  Standard Features: Transport hitch for highway transportation. Raking width of 19'. 913HR - tractor hydraulic opening and closing - after repositioning a stabilizer bar. Poly Shield.

• Buffalo

• 

  Buffalo - Spike Tooth Sled Harrow

  Heavy duty tubular frame. Strong 4' wide channel tooth bars with 5 angle positions. Individually mounted harrow teeth. EZ-adjust runners. Remove 2 pins on each runner to adjust up & down (over 10' range in 5/8' steps). 'Plane' off the top of all beds evenly.

• 

  Buffalo - Border Disc

  Standard Features: 1-1/2' hi-tensile steel gang bolts. Heavy pillow block. Triple sealed bearings. Dirt shield. New Ingersoll Dura Tight™ end washers for positive holding of gang bolt assembly. Reversible gangs.

• 

  Buffalo - Shaper and Packer

  Standard Features: Equipped with heavy duty wrap-around tubular frame. CAT. II A-Frame. 6' wide x 73' skids. Replaceable steel runners. CAT. II 3-point hitch or pull type models.

• Valleytown

• 

  Valleytown - Model VT10 - Vineyard Duster

  Easy turning: A narrow profile makes turns at the and of rows easy and allow dusting late in the season when foliage is heavy. Trouble free: P.T.O. driven, the Valleytown Duster requires minimal power. It's almost maintenance free, with few moving parts and no plugged nozzles or hoses to contend with. All drive parts are easily accessible and ball bearings are grease sealed. The hopper holds an ample 200 pounds of material. Hookup is 3 point, Cat....

Products by Pequea Machine Inc.

• Hay Tools - Hay Rakes

• 

  Pequea - Model HR-939 - Rotary Rakes

  Pequea's HR-939 Haymaker is simple, sturdy, and reliable. With a 9' raking width, it is designed for small to mid size farms but built to last. Like all Pequea Rotary Rakes, the rake features two walking beams and a lift cylinder to navigate any terrain. 

• 

  Pequea - Model HR 1140 - Rotary Rakes

  The HR1140 is features an 11' raking width with a tilt cylinder, lift cylinder, walking beams and removable tine arms to make raking easy. 

• Hay Tools - Hay Tedders

• 

  Pequea - Model TT 2100 - 2 Rotor Turbo Tedders

  Pequea's 2 rotor tedder comes with the same rugged features as the 4, 6, and 8 rotor tedders in a compact form. It has the same tines, rotors, axles, and gearboxes it's bigger brothers in a 2 rotor form. Designed for smaller fields that want quality hay, the TT2100 will get the job done.

• 

  Pequea - Model 710 & 910 - Fluffer Tedders

  The Pequea Fluffer Tedder's unique action gently lifts and releases hay with minimum damage to leaves. Labor saving, it allows you to aerate hay as a last step before baling or chopping. The Fluffer Tedder gives you better control over how your hay dries no matter how you put it up and allows air to move through your hay for faster drying so the cure is uniform. This is an all-around ideal unit for farmers who insists on high-quality forage.

• Spreaders - Compact Manure Spreaders

• 

  Pequea - Model 25 G - Compact Manure Spreaders

  For the equine enthusiast or gentleman farmer Pequea's model 25G to 80PTO manure spreaders demonstrate big abilities in a compact size. Easily maneuvered in tight spaces, these compact manure spreaders allow for in-stall loading, making clean out easy and efficient.

• 

  Pequea - Model 35 G - Compact Manure Spreaders

  For the equine enthusiast or gentleman farmer Pequea's model 25G to 80PTO manure spreaders demonstrate big abilities in a compact size. Easily maneuvered in tight spaces, these compact manure spreaders allow for in-stall loading, making clean out easy and efficient.

• Spreaders - Manure Spreaders

• 

  Pequea - Model 125 P - Manure Spreaders

  With a 125 bushel capacity, Pequea's 125P is designed to withstand the demands of today's small to mid-size farm. The manure spreader box is constructed of fully welded 10 Gauge High Strength steel. Our large PTO model manure spreaders include 2 speed gearboxes, with a neutral and cleanout setting. Pequea manure spreader options include fine spread pans, top beaters, and hydraulic end gates.

• 

  Pequea - Model 175 P - Manure Spreaders

  With a 175 bushel capacity, Pequea's 175P is designed to withstand the demands of today's small to mid-size farm. The manure spreader box is constructed of fully welded 10 Gauge High Strength steel. Our large PTO model manure spreaders include 2 speed gearboxes, with a neutral and cleanout setting. Pequea manure spreader options include fine spread pans, top beaters, and hydraulic end gates.

• Spreaders - Litter/Poultry Spreaders

• 

  Pequea - Model SP Series - Litter/Poultry Spreaders

  The SP Series Spreaders are Pequea’s latest addition to our line of manure handling equipment. Offered in a 16', 18', 20', and 22' hopper lengths, the SP spreaders bring up to 580 cubic foot hauling capacity along with easy-to-use flow control valves for the apron and spinner speeds. With over 15 different options available including a truck mount configuration, the SP Series is highly adaptable to any environment.