63 products found
Krohne Messtechnik GmbH Products
-
Flow Measurement - Flowmeters - Electromagnetic Flowmeters
For all applications with conductive liquids: From basic applications to demanding flow and custody transfer (CT) measurements. Designs and liner materials for various applications - from potable water to extremely adhesive, abrasive or aggressive fluids. Large choice of nominal sizes up to DN3000 / 120".
-
OPTIFLUX - Model 1050 - Electromagnetic Flowmeters
The OPTIFLUX 1050 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is a very economical solution for simple applications with conductive liquids (≥ 5 μS/cm) involving low solid content (up to 10%). This particularly includes applications in water, wastewater, mobile applications, agriculture or firefighting where extremely high accuracy, extensive diagnostics or a wide range of ...
-
OPTIFLUX - Model 1100 - Electromagnetic Flowmeters
The OPTIFLUX 1100 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is an economical solution for general applications with conductive liquids (≥5 μS/cm) and lower solid content (up to 10%). Unlike the basic device OPTIFLUX 1050, the OPTIFLUX 1100 offers a better accuracy. It is suitable for use in various industries – from ...
Flow Measurement - Flowmeters - Coriolis Mass Flowmeters
For all process and custody transfer (CT) applications: Mass, volume flow, density and concentration measurement of liquids and gases. Secure wireless access via Bluetooth®, even in safety-related applications. Maintains operation even with entrained gas of up to 100% (EGM™),
OPTIMASS - Model 6400 - Coriolis Mass Flowmeters
The OPTIMASS 6400 is the standard high performance Coriolis mass flowmeter for the process industry. The twin bent tube meter offers superior performance and high accuracy in virtually any application: From process control in (petro)chemical applications to concentration measurements in the food and beverage industry to custody transfer filling and transport measurements in the oil and gas industry. Its high-end options also make the ...
OPTIMASS - Model 2400 - Coriolis Mass Flowmeters
The OPTIMASS 2400 is the world’s highest capacity Coriolis mass flowmeter for liquids and gases. With its twin or four straight tube design, the Coriolis meter is ideally suited for bunkering operations and custody transfer or fiscal metering in the oil and gas industry. It can also be used for any bulk mass application with many other products such as syrup, molasses or raw chemicals up to 4,600 t/h / 169,000 lb/min. The Coriolis ...
Flow Measurement - Flowmeters - Variable Area Flowmeters
For simple and cost-effective flow measurement of gases or liquids without auxiliary power: Glass and metal tube purgemeters for low-flow applications <DN15 / ½″. Glass and metal tube process meters up to DN150 / 6". Optional electronics: limit switches, analogue outputs, digital communication.
Krohne - Model H250 M40 - Variable Area Flowmeter for Liquids and Gases
The H250 M40 is the standard variable area (VA) flowmeter for the process and OEM industry. The VA meter combines mechanical flow measurement of liquids or gases with state-of-the-art communication capabilities. The device is modularly extendable. Additional electronic modules can be added or replaced at any time without process interruption. In this way, its functionality adapts to new requirements – from analogue flow measurement ...
Krohne - Model H250 M8 - Variable Area Flowmeter for Liquids and Gases
The H250 M8 is a variable area (VA) flowmeter with electrical signal output and bargraph indication or mechanical indication with two optional limit switches. The compact flowmeter allows space-saving installation. It is thus highly suitable for installation in limited spaces. The H250 M8E version features magnetic sensors recording the position of the float without contact or hysteresis. Standard system operation is with a linear analogue ...
Flow Measurement - Flowmeters - Differential Pressure Flowmeters
For a wide range of process applications: For volume, mass flow and density measurement of liquids, gases or steam. With 3D linearisation of transmitter. Wide range of primary elements and accessories.
OPTIBAR - Model DP - Compact Orifice Plate Flowmeter
The compact orifice plate with OPTIBAR DP transmitter is an economic DP flowmeter for a broad range of applications – from demi-water to chemicals to steam. The integral orifice plate is a one-piece design per ISO 5167-2 or ASME MFC-3M, consisting of a compact orifice plate, a sandwich meter body, impulse lines and a connection flange. KROHNE offers the complete DP flow solution with integral orifice plate, manifold and DP ...
Krohne - Integral Orifice Meter Run Assembly
The integral orifice meter run assembly is a differential pressure flowmeter especially designed for smaller line sizes where the surface roughness, weld seams and other geometrical imperfections have a relatively big influence on the measurement uncertainty. The DP flowmeter therefore features a minimum length of upstream and downstream pipe, reducing additional uncertainties of the installation to a minimum. It is suitable for process and allocation ...
Flow Measurement - Flowmeters - Vortex Flowmeters
For utility applications, advanced energy management and Safety Instrumented Systems (SIS): Sophisticated flowmeters with integrated pressure and temperature compensation and integrated energy calculator for advanced energy measurement. Certified for Safety Instrumented Systems (SIS). Cost-effective and robust devices for harsh process conditions and/or basic applications.
OPTISWIRL - Model 4200 - Vortex Flowmeter
The OPTISWIRL 4200 is a Vortex flowmeter with integrated temperature sensor. It is best suited for flow measurement of liquids, dry or humid gases and saturated or superheated steam in supply processes (auxiliary service) and distribution networks. The device is also the optimum solution for advanced energy management systems (acc. to ISO 50001) as it can be supplied with integrated gross and net heat measurement for steam and condensate. For gas and ...
OPTISWIRL - Model 5080 - Vortex Flowmeter
The OPTISWIRL 5080 is a Vortex flowmeter for high temperature applications up to +427°C / +800°F. The flowmeter is particularly designed for measurement of saturated and superheated steam above +240°C / +464°F. Other applications involve high temperature media like thermo oil or other heat transfer liquids as well as high temperature process and auxiliary gases. The OPTISWIRL 5080 is available with flange connection or in ...
Flow Measurement - Flow Controllers - Electromagnetic Flow Controllers
For flow indication of conductive media: Cost-effective flow monitoring of liquids, pastes and slurries. Insertion-type devices with adjustable switching points. Also for immersed applications.
Krohne - Model DWM 1000 - Electromagnetic Flow Controller
The DWM 1000 is a 2-wire electromagnetic flow controller to monitor the flow of conductive liquids, pastes and slurries. The switching point of this insertion-type device is adjustable over a full-scale range of 0.1 …9.9 m/s or 0.3…32.5 ft/s. A welding socket is supplied as standard for welding the DWM 1000 directly onto process pipes (DN50…400 / 2…16"). The long version (DWM 1000 L) is suited ...
Flow Measurement - Flow Controllers - Mechanical Flow Controllers
For flow indication of conductive and non-conductive liquids: Cost-effective mechanical measuring principle. No power supply needed. Suitable for hazardous environments.
Krohne - Model DW 181 - Mechanical Flow Controller for Clean Liquids
The DW 181 is an inline flow controller for locally indicating the flow of homogeneous clean liquids without auxiliary power. It is suitable for horizontal or vertical pipes. The flow controller can have G or NPT threaded connections with sizes ranging from sup>3⁄4…2″. The measuring tube and connection are made of either bronze or stainless steel (1.4404 /316 L). Two types of indicator are ...
Krohne - Model DW 182 - Mechanical Flow Controller for Clean Liquids
The DW 182 is an inline flow controller for locally indicating the flow of homogeneous clean liquids without auxiliary power. It is suitable for horizontal or vertical pipes. The flow controller comes with flanged connections (DN15…65 / 1⁄2…21⁄2″). The measuring tube and connection is made of stainless steel (1.4404 / 316 L). Two types of indicator are ...
Flow Measurement - Components & Peripheral Equipment for Flow Measurement - Primary Flow Elements - Orifice Plates
For flow measurement with a DP transmitter: Single orifice plates and flange assemblies (acc. to ASME 16.36). Orifice plate meter run assemblies. Acc. to standards (ISO 5167, ASME MFC 3M, ISO TR 15377 etc.).
OPTIBAR - Model OP 1100 - Orifice Plate with RF Sealing Face
The OPTIBAR OP 1100 is an orifice plate (OP) with raised face (RF) design. It is a simple and cost-effective DP flow element for basic applications with clean liquids, gases and low velocity steam flows. The primary element is particularly suitable for use at uncritical pressure and temperature conditions (up to +450°C / +842°F; max. ASME Cl 2500). Plate and handle of the OPTIBAR OP 1100 are a one-piece seamless ...
Flow Measurement - Components & Peripheral Equipment for Flow Measurement - Averaging Pitot Tubes
For combination with a DP flow transmitter: From basic to engineered versions up to DN12000 / 470" or +1000°C / +1832°F. Cost-effective primary elements for large lines, low pressure loss, bi-directional. For applications with clean liquids, gases and steam.
OPTIBAR - Model PT 2000 - Averaging Pitot Tube with Multiple Impact-Sensing Ports
The OPTIBAR PT 2000 is an averaging pitot tube for applications with clean liquids, gases and steam. It is ideally suited for DP flow measurements requiring low pressure drop or cost-effective flow metering in extremely large pipes (up to DN20000 / 800"). Unlike conventional single-point pitot tubes that have the limitation of being a point-velocity device, the OPTIBAR PT 2000 averaging pitot tube has multiple impact-sensing ports ...
Flow Measurement - Components & Peripheral Equipment for Flow Measurement - Engineered Primary Flow Elements
For flow measurement with DP transmitter: Flow sections and standardized DP flow elements such as nozzles, Venturi tubes, wedge and cone meters (according to ISO 5167, ASME MFC-3M, ISO TR 15377 etc.). Traceably calibrated, excellent long term stability. Completely pre-assembled and customized designs adapted to the specific application requirements.
Krohne - Flow Nozzle
A flow nozzle is an engineered primary flow element for non-viscous and erosive fluids under high velocity and pressure, which would wear or damage orifice plates. Flow nozzles are either integrated into pre-assembled meter runs, designed to be mounted in between flanges or welded into the pipe. They require less straight upstream piping and incur lower permanent pressure loss in comparison to orifice plates. There are no sharp edges exposed to wear. A ...
Level Measurement - Level Transmitters - Radar (FMCW) Level Transmitters
Non-contact level measurement of liquids, pastes, granulates, powders and other solids (?r ≥1.4): Measuring distances up to 100 m / 328 ft. Different antenna options, e.g. for corrosive or abrasive media, high pressure or temperature and applications with agitators. Also suitable for hazardous areas, Functional Safety (SIL) or hygienic applications.
OPTIWAVE - Model 1400 - Radar (FMCW) Level Transmitter
The OPTIWAVE 1400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in water and wastewater applications. It is equally suited for continuous, non-contact level measurement of water from springs, rivers, lakes or the sea as well as rainwater, wastewater, sludge or other liquids in storage applications. The device features a robust 316L stainless steel housing and comes IP68 / NEMA 4X/6 rated for use in open air installations ...
OPTIWAVE - Model 3500 - Radar (FMCW) Level Transmitter
The OPTIWAVE 3500 is a 2-wire 80 GHz radar (FMCW) level transmitter for liquids in hygienic applications. It is designed for continuous, non-contact level measurement in the food and beverage as well as pharmaceutical industry. The device features a flush-mounted PEEK Lens antenna with a small beam angle and dead zone for precise measurement even in small and narrow tanks with agitators. It is equally suited for use on larger tanks, measuring distances ...
Level Measurement - Level Transmitters - Guided radar (TDR) Level Transmitters
Contact level measurement of liquids, solids or liquid-liquid interfaces (?r ≥1.3). Measuring distances up to 60 m / 196 ft. Large choice of probes, e.g. for aggressive or abrasive media, high pressure or temperature and tanks with internals or boiling product surfaces. Suitable for hazardous areas, Functional Safety (SIL) or hygienic applications.
OPTIFLEX - Model 1100 - Guided Radar (TDR) Level Transmitter for Basic Liquid Applications
The OPTIFLEX 1100 is a guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for basic storage applications in non-hazardous areas. The level transmitter is a higher performing replacement for traditional level transmitters such as RF capacitance or conductive level ...
OPTIFLEX - Model 7200 - Guided Radar (TDR) Level Transmitter for Advanced Liquid Applications
The OPTIFLEX 7200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. With its large choice of probe types and materials, this level transmitter is the high-end guided radar for level and interface measurement in the chemical or oil and gas industries. It is suitable for storage or process tanks up to 60 m / 196.85 ft, containing all kind of liquids – from hydrocarbons like slop ...
Level Measurement - Level Transmitters - Ultrasonic Level Transmitters
Non-contact level measurement of liquids, bulk and solids: Measuring distances from 0.25...15 m / 0.82…49 ft. Resistant materials for transducers and process connections, e.g. for slightly corrosive media. Also suitable for hazardous applications.
OPTISOUND - Model 3010 - Ultrasonic Level Transmitter for Basic Applications
The OPTISOUND 3010 is a 2- or 4-wire ultrasonic level transmitter for basic applications up to 5 m / 16.4 ft. It is designed for continuous measurement of liquids such as rainwater and wastewater as well as bulk solids in nearly all sectors of industry. The level transmitter is particularly suitable for use in small tanks or in open channels for flow ...
OPTISOUND - Model 3020 - Ultrasonic Level Transmitter for Basic Applications
The OPTISOUND 3020 is a 2- or 4-wire ultrasonic level transmitter for basic applications. It is particularly suitable for use in small and medium-sized tanks up to 8 m / 26.3 ft. The level transmitter measures rainwater and wastewater, liquids with a high degree of contamination, corrosive liquids or ...
Level Measurement - Level Transmitters - Potentiometric Level Transmitters
Contact level measurement of liquids and pastes (>50 μS/cm). From 0.2...3 m / 1...9.8 ft probe length. Not sensitive to build-up and foam. Also suitable for hygienic applications with tough, pasty or highly adhesive media with low conductivity.
Krohne - Model BM 500 - Potentiometric Level Transmitter for Hygienic Applications
The BM 500 is a potentiometric level transmitter designed for hygienic applications with pasty or highly adhesive media such as fruit juice, ketchup, beer, toothpaste or mustard. It can make full use of its advantages in small tanks ...
Level Measurement - Level Transmitters - Displacer Level Transmitters
Contact level measurement of liquids and liquid-liquid interfaces in tanks or bypass chambers. Measuring distances up to 5.5 m / 18 ft (longer on request). For a broad range of process conditions, e.g. pressurized or high temperature vessels, corrosive media etc. Suitable for hazardous areas.
Krohne - Model BW 25 - Displacer Level Transmitter
The BW 25 is a loop-powered displacer level transmitter for measuring and/or detecting liquid level or liquid-liquid interface under extreme process conditions. It can deal with corrosive media, high temperatures (up to +400°C / +752°F) and high pressures (up to 400 barg / 5801 psig). The BW 25 can be used as level indicator without the need of auxiliary power supply. Equipped with a switch module the unit ...
Level Measurement - Level Transmitters - Pressure Level Transmitters
Contact level measurement of liquids and liquid-liquid interfaces. Large choice of hydrostatic pressure level transmitters. From ultra-compact versions to diaphragm sealed gauges. Suitable for aggressive, abrasive or HT media, hygienic requirements or hazardous areas.
OPTIBAR - Model DP 7060 - Differential Pressure Transmitter with Diaphragm Seal
The OPTIBAR DP 7060 with single- or two-sided OPTIBAR DSD diaphragm seal is a pressure transmitter for differential pressure, level, density and interface measurement. It can be used in pressurised pipes, tanks and closed vessels. Its wide selection of inline or membrane diaphragm seals makes it particularly suitable for extremely aggressive and corrosive media, abrasive and highly viscous liquids or for hygienic applications. For ...
OPTIBAR - Model P 1010 - Pressure Transmitter for Basic Pressure And Level Applications
The OPTIBAR P 1010 is an ultra-compact pressure transmitter for absolute and gauge pressure measurement of gases and liquids. The pressure transmitter is a very cost-effective device for simple process pressure applications (e.g. monitoring of pumps, compressors or other machinery) as well as hydrostatic level measurement in open vessels where space-saving installation is required. The transmitter features an optional fully welded ...
Temperature Measurement - Temperature Assemblies - Resistance (RTD) Temperature Assemblies
For standard applications as well as applications with high pressures and flow velocities or hygienic requirements. Temperature range: -40…+600°C / +1100°F for RTD. From variants with DIN- and ASME-style thermowells to spring-loaded versions for surface measurement or hygienic designs. Flanged, threaded, plug-in, weld-in, strap-on and clamp variants
OPTITEMP - Model TRA-H61 - Resistance (RTD) Temperature Assembly for Hygienic Applications
The OPTITEMP TRA-H61 is a RTD sensor assembly with reduced thermowell for hygienic applications in the food & beverage industry. The hygienic temperature sensor with stainless steel connection head and fast responding sensor tip is particularly suitable for temperature measurement of beverages, dairy products or pasty food or. It is therefore made of stainless steel (1.4404 / 316L) with an industry-specific surface finish of the ...
OPTITEMP - Model TRA-H65 - Resistance (RTD) Temperature Assembly for Hygienic Applications
The OPTITEMP TRA-H65 is a RTD sensor assembly with reduced thermowell and firmly welded clamp connection for applications in the food & beverage industry. The hygienic temperature sensor with stainless steel connection head and fast responding sensor tip is particularly suitable for temperature measurement of beverages, dairy products or pasty food. The sensor is therefore made of stainless steel (1.4404 / 316L) with an industry-specific ...
Temperature Measurement - Temperature Assemblies - Thermocouple (TC) Temperature Assemblies
For standard or high temperature applications and applications with high pressures and flow velocities. Temperature range: -40…+1600°C / +2900°F for TC J, K, S. From variants with or without DIN- and ASME-style thermowells to double ceramic versions. Flanged, threaded, weld-in or plug-in variants.
OPTITEMP - Model TCA-F13 - Thermocouple (TC) Temperature Assembly for Standard Applications
The OPTITEMP TCA-F13 is a flanged thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2F) and neck tube. The industrial temperature assembly for standard applications is suitable for temperature measurement of solids, liquids and gases, in pipes and tanks at low to medium pressures and flow velocities. It is designed to operate up to +600°C / +1100°F. The particular advantage of this sensor type is that ...
Temperature Measurement - Temperature Sensors - Resistance (RTD) Compact Sensors
For industrial process, OEM, HVAC or hygienic applications with limited space. Temperature range: -50…+600°C / -58…+1000°F for RTD. Extremely small housing with optional built-in transmitter. Threaded, wall-mount.
OPTITEMP - Model TRA-C61 - Resistance (RTD) Compact Sensor for Hygienic Applications
The OPTITEMP TRA-C61 is a compact resistance sensor (RTD) with optional integrated transmitter for hygienic use in limited space. The temperature sensor is particularly designed for food & beverage applications. This includes the temperature measurement of beverages, dairy products or pasty food. The sensor is therefore made of stainless steel (1.4404 / 316L) with an industry-specific surface finish of the thermowell of Ra ≤0.8 ...
OPTITEMP - Model TRA-C65 - Resistance (RTD) Compact Sensor for Hygienic Applications
The OPTITEMP TRA-C65 is a compact resistance sensor (RTD) with optional integrated temperature transmitter for hygienic use in limited space. The temperature sensor with firmly welded clamp connection is particularly designed for applications in the food & beverage industry. This includes the temperature measurement of beverages, dairy products or pasty food. The sensor is therefore made of stainless steel (1.4404 / 316L) with an ...
Temperature Measurement - Temperature Sensors - Resistance (RTD) Cable Sensors
For surface and underground measurement or bearing and plastic moulding machinery applications. Temperature range: -50…+600°C / -58…+1000°F for RTD. Different variants: with flying wires, vibration-proof, oil-tight, IP68, with different cable insulating materials. Threaded, plug-in, strap-on, clamp or wall mount variants.
OPTITEMP - Model TRA-G30 - Resistance (RTD) Cable Sensors
The OPTITEMP TRA-G30 is a clamp-on surface temperature sensor (RTD) with spring-loaded tip. The resistance cable sensor is suitable for temperature measurement on pipes and tanks or in any application where immersion or insertion of the sensor is not desired or possible. The temperature sensor has a small form factor and is designed to be placed underneath pipe insulation or on an uninsulated surface. Its measuring range is ...
OPTITEMP - Model TRA-W10 - Resistance (RTD) Cable Sensors
The OPTITEMP TRA-W10 is a plug-in cable sensor (RTD) suitable for temperature measurement of solids, liquids and gases at low pressures and flow velocities. The temperature sensor can be used in pipes and tanks, from -50…+200°C / -58…+390°F. It features a Pt100 or Pt1000 measuring element that is placed in the measuring tip for fast response times. The OPTITEMP TRA-W10 comes with PVC, silicone or PTFE insulated ...
Temperature Measurement - Temperature Sensors - Thermocouple (TC) Cable Sensors
For machinery and high temperature applications. Temperature range: up to +1250°C / +2282°F, for TC J, K or N. Different mineral insulated variants: with flying wires, connection head or thermo plugs. Plug-in variants.
OPTITEMP - Model TCA-M10 - Thermocouple (TC) Cable Sensor
The OPTITEMP TCA-M10 is a mineral insulated (MI) thermocouple with uninsulated flying wires for installation where connection terminals already exist. The MI cable sensor is particularly suitable for applications where the ambient temperature exceeds the maximum allowable temperature of standard cable material (e.g. in test bench applications). The MI cable of the sensor can be easily formed to fit into limited spaces. Its small diameter ...
OPTITEMP - Model TCA-M20 - Thermocouple (TC) Cable Sensor
The OPTITEMP TCA-M20 is a mineral insulated (MI) thermocouple with insulated flying wires for installation where connection terminals already exist. The MI cable sensor is particularly suitable for applications where the ambient temperature exceeds the maximum allowable temperature of standard cable material (e.g. in test bench applications). The MI cable can be easily formed to fit into limited spaces. Its small diameter makes it perfect ...
Temperature Measurement - Temperature Transmitters - Head-Mounted Temperature Transmitters
For mounting in a connection head. With galvanic isolation and various diagnostics (error correction, sensor insulation and break monitoring etc.). From standard to high accuracy, Ex or SIL. Different configuration options, including NFC and Bluetooth.
OPTITEMP - Model TT 12 C - Head-Mounted Temperature Transmitter with RTD Input and Extremely Compact Design
The OPTITEMP TT 12 C is a universal programmable 2-wire head-mounted temperature transmitter for Pt100 and Pt1000 RTD elements. The cost-effective transmitter offers reliable temperature measurement in all basic applications and is particularly suitable for use in the food and beverage industry and in HVAC installations. The OPTITEMP TT 12 C features an extremely compact design with a height of only 10.5 mm, offering ease of ...
OPTITEMP - Model TT 53 C - Head-Mounted Temperature Transmitter with Universal Input
The OPTITEMP TT 53 C is a universal, programmable, 2-wire head-mounted temperature transmitter. The galvanically isolated transmitter works with RTD elements, thermocouple (TC) elements or other inputs (mV and Ω). It supports wireless Near Field Communication (NFC) as well as Bluetooth® communication. The OPTITEMP TT 53 C transmitter can thus be remotely configured and monitored using mobile devices with the
Temperature Measurement - Temperature Transmitters - Rail-Mounted Temperature Transmitters
For mounting on rails in a control cabinet. With galvanic isolation and various diagnostics (error correction, sensor isolation and break monitoring etc.). From standard to high accuracy, Ex or SIL, Different configuration options, including NFC and Bluetooth.
OPTITEMP - Model TT 12 R - Rail-Mounted Temperature Transmitter with RTD Input
The OPTITEMP TT 12 R is a universal programmable 2-wire rail-mounted temperature transmitter for Pt100 and Pt1000 RTD elements. The cost-effective transmitter offers reliable temperature measurement in all basic applications and is particularly suitable for use in the food and beverage industry and in HVAC installations. The OPTITEMP TT 12 R features an extremely compact design with a 6.5 mm width. There are different snap-in ...
OPTITEMP - Model TT 53 R - Rail-Mounted Temperature Transmitter with Universal Input
The OPTITEMP TT 53 R is a universal, programmable, 2-wire rail-mounted temperature transmitter. The galvanically isolated transmitter works with RTD elements, thermocouple (TC) elements or other inputs (mV and Ω). It supports wireless Near Field Communication (NFC) as well as Bluetooth® communication. The OPTITEMP TT 53 R transmitter can thus be remotely configured and monitored using mobile devices with the
Temperature Measurement - Temperature Accessories - Transmitter Configuration Kits
For programmable OPTITEMP transmitters. Complete package for transmitter quick start. Easy transmitter configuration via PC. USB communication.
OPTITEMP - Model TT-CON BT - Transmitter Configuration Kit
The OPTITEMP TT-CON BT is a Bluetooth® modem for wireless communication between mobile devices and KROHNE temperature transmitters that support the wireless technology standard. Together with the dedicated OPTITEMP Connect mobile app it forms a complete kit for configuration and monitoring of OPTITEMP TRAnsmitters without power supply and wiring. The OPTITEMP TT-CON BT just needs to be plugged into the ...
OPTITEMP - Model TT-CON EX - Transmitter Configuration Kit
OPTITEMP TT-CON is a complete kit for the PC configuration of all PC programmable OPTITEMP temperature transmitters (except OPTITEMP TT 50). The kit includes the USB interface, connection cables and the ConSoft™ configuration software. The communication with the connected transmitter is automatically established with ConSoft™. Annoying problems in defining the PC communication ports or interfaces are ...
Temperature Measurement - Temperature Accessories - Measuring Inserts
RTD (Pt100) or thermocouple (K or J) for temperature assemblies. Temperature range: -200…+600°C / -328…+1112°F for RTD, -40…+1000°C / -40…+1832°F for TC. Spring-loaded, mineral insulated design. Also available as intrinsically safe (ATEX, IECEx).
OPTITEMP - Model TC 100 - Measuring Insert with Thermocouple
The OPTITEMP TC 100 is a replaceable spring-loaded measuring insert with thermocouple for installation into temperature assemblies. It is made of a mineral insulated cable with laser welded bottom plug. Its measuring insert comes in type K or J, other types are available on request. The OPTITEMP TC 100 is highly flexible and features superior insulation resistance and a high degree of vibration resistance. It can be equipped ...
OPTITEMP - Model TR 100 - Measuring Insert with Pt100 Resistance Sensor (RTD)
The OPTITEMP TR 100 is a replaceable spring-loaded measuring insert with Pt100 RTD sensor for installation into temperature assemblies. It is made of a mineral insulated cable with laser welded bottom plug. The measuring insert is highly flexible and features superior insulation resistance and a high degree of vibration resistance. The OPTITEMP TR 100 can be equipped with ceramic terminal block, flying wires or with an ...
Pressure Measurement - Pressure Transmitters - Ultra-Compact Pressure Transmitters
For basic pressure and level applications. Cost-effective, small transmitter designs and switches with IO-Link communication. Absolute and gauge pressure measurement in confined spaces. Stainless steel diaphragms: recessed or flush-mounted, also for hygienic requirements.
OPTIBAR - Model P 1010 - Pressure Transmitter for Basic Pressure and Level Applications
The OPTIBAR P 1010 is an ultra-compact pressure transmitter for absolute and gauge pressure measurement of gases and liquids. The pressure transmitter is a very cost-effective device for simple process pressure applications (e.g. monitoring of pumps, compressors or other machinery) as well as hydrostatic level measurement in open vessels where space-saving installation is ...
OPTIBAR - Model PSM 1010 - Pressure Switch for Basic Pressure and Level Applications
The OPTIBAR PSM 1010 is an electronic pressure switch for absolute or gauge pressure measurement of liquids and gases. The cost-effective pressure switch is suitable for simple process pressure applications (e.g. monitoring of pumps, compressors or other machinery) as well as hydrostatic level measurement in open vessels where space-saving installation is required. Due to its fully welded measuring cell with stainless steel diaphragm, the OPTIBAR PSM ...
Pressure Measurement - Pressure Transmitters - Compact Pressure Transmitters
For general pressure, differential pressure and level applications. Robust, fully welded stainless steel housing with optional display and adjustment module. Recessed or flush-mounted diaphragms, many wetted materials available. Meets all requirements from hazardous areas to hygienic applications with standard 2-wire HART output.
OPTIBAR - Model PM 3050 - Pressure Transmitter for General Pressure and Level Applications
The OPTIBAR PM 3050 is a compact pressure transmitter with metallic diaphragm for general pressure and level applications. The excellent performance combined with outstanding robustness of the full stainless-steel construction and increased overload resistance makes this device the optimal choice for general pressure applications. A wide range of hygienic process connections with front flush diaphragm compliant with 3A Sanitary Standard and ...
OPTIBAR - Model DP 3050 - Differential Pressure Transmitter
The OPTIBAR DP 3050 is a differential pressure transmitter with integrated absolute pressure measurement. It is the ideal choice for general flow, level and differential pressure applications. The DP transmitter is currently the most compact pressure transmitter in the market – worldwide. This makes it particularly suitable for space-saving installation in applications with limited space, e.g. in mechanical and technical plant engineering. The ...
Pressure Measurement - Pressure Transmitters - Process Pressure Transmitters
For advanced pressure, differential pressure, level and interface applications. Made for the most demanding process applications with advanced software, communication and performance. Available with ceramic or metallic diaphragms and various housing materials. Extensive features and approvals, e.g. for hazardous areas, hygienic environments, or safety-related applications (SIL).
OPTIBAR - Model PC 5060 - Pressure Transmitter for Advanced Process Pressure and Level Applications
The OPTIBAR PC 5060 is a pressure transmitter for process pressure and hydrostatic level measurement in all kinds of process applications. It is designed for absolute and gauge pressure measurement in open tanks and – as dual version for electronic differential pressure measurement – also in closed vessels. The pressure device features a ceramic capacitive measuring cell that guarantees maximum overload and vacuum resistance for high plant ...
OPTIBAR - Model PM 5060 - Pressure Transmitter for Process Pressure and Level Applications
The OPTIBAR PM 5060 is a pressure transmitter for process pressure and level measurement in hygienic and non-hygienic applications with gases, liquids and steam. It can be used in open tanks and – as dual version for electronic differential pressure measurement – also in closed vessels. The pressure device features a piezoresistive or a strain gauge metallic diaphragm. Depending on the measuring cell, the pressure transmitter can ...
Pressure Measurement - Diaphragm Seals
Comprehensive diaphragm seal portfolio for all process applications. Up to +400°C / +752°F and 0…400 bar / 0…5801 psi. Special wetted materials: tantalum, titanium, Hastelloy, gold or highly vacuum-proof PTFE coating. Very low temperature impact due to innovative diaphragm technology.
OPTIBAR - Model DSP 2000 - Diaphragm Seal with Threaded Connection or Open Measuring Flanges
The OPTIBAR DSP 2000 is a membrane diaphragm seal for mounting to the OPTIBAR PM 5060 and OPTIBAR PM 3050 pressure transmitters. It features a versatile design with threaded connection or open measuring flange for direct or capillary tube attachment. The diaphragm seal is thus perfectly suited for special applications requiring flexibility as to the selection of the right process connection. It comes with optional flushing ...
OPTIBAR - Model DSP 3000 - Diaphragm Seal with Flange Design and Optional Extension
The OPTIBAR DSP 3000 is a membrane diaphragam seal for mounting to the OPTIBAR PM 5060 and OPTIBAR PM 3050 pressure transmitters. It features a flange design for direct or capillary tube attachment. The diaphragm seal comes with a wide selection of wetted materials from stainless steel to chemically resistant PTFE or PFA coatings, Hastelloy®, Duplex, titanium, tantalum and gold. This makes it ideal for ...
OPTIBAR - Model DSD 3100 - Diaphragm Seal with Flange Design and Optional Extension
The OPTIBAR DSP 3000 is a single-sided diaphragm seal for mounting to the OPTIBAR DP 7060 differential pressure transmitter. It features a flange design with optional extension for direct tube attachment. The diaphragm seal comes with a wide selection of wetted materials from stainless steel to chemically resistant PTFE or PFA coatings, Hastelloy®, Duplex, titanium, tantalum and gold. This makes it ideal for absolute or ...
OPTIBAR - Model DSD 3110 - Diaphragm Seal with Flange Design and Optional Extension
The OPTIBAR DSP 3110 is a single-sided diaphragm seal for mounting to the OPTIBAR DP 7060 differential pressure transmitter. It features a flange design with optional extension for capillary tube attachment. The diaphragm seal comes with a wide selection of wetted materials from stainless steel to chemically resistant PTFE or PFA coatings, Hastelloy®, Duplex, titanium, tantalum and gold. This makes it ideal for absolute ...
Pressure Measurement - Primary Flow Elements - Orifice Plates
For flow measurement with a DP transmitter. Single orifice plates and flange assemblies (acc. to ASME 16.36). Orifice plate meter run assemblies. Acc. to standards (ISO 5167, ASME MFC 3M, ISO TR 15377 etc.).
OPTIBAR - Model OP 1110 - Orifice Plate with RTJ Sealing Face
The OPTIBAR OP 1110 is an orifice plate (OP) with ring-type joint (RTJ) design. The DP flow element is particularly suitable for high pressure applications with clean liquids, gases and low velocity steam flow. The RTJ orifice plate features an octagonal integral gasket for mounting between ring-type joint flanges. The cross-section profile of the OPTIBAR OP 1110 is designed to fit inside the recess of the RTJ flanges and is used as ...
OPTIBAR - Model OP 3100 - Orifice Plate with Flat Sealing Face and Corner Taps
The OPTIBAR OP 3100 is an integral orifice plate (OP) with carrier ring and corner taps for flow measurement of aggressive and non-aggressive gases, steam and liquids. The carrier ring of the orifice plate is made from a solid one piece. The orifice plate is one piece with the carrier ring for smaller diameters and screwed for bigger diameters. The separate type OP can be installed between standard pipe flanges on horizontal or vertical ...
KROHNE - Model WGS 1000 / 2000 / 3000 - Venturi Based Wet Gas Measurement
The KROHNE Venturi based wet gas solutions, WGS 1000 / 2000 / 3000, are designed to measure the flow of unprocessed gas directly from the well. Intermediate parameters at the point of measurement are calculated from known reservoir and well compositions and used to generate fraction and density tables for the operational range of the well or ...
Krohne - Model FOCUS-1 - Multifunctional Smart Flow Control Instrument
FOCUS-1 is the first intelligent process node specifically developed for the process industry 4.0. This multifunctional smart flow control instrument – developed by FOCUS-ON, a SAMSON and KROHNE company – combines sensors, actuator and control functionality in one device. By measuring flow, pressure and temperature simultaneously and regulating its valve function independently, all specified set points can be accurately and reliably ...
OPTIBAR - Model PSM 2010 - Electronic Pressure Switch
The OPTIBAR PSM 2010 is an electronic pressure switch for applications in the food and beverage industry as well as the pharmaceutical industry. Its hygienic construction comes with a fully welded front-flush diaphragm to meet the most stringent industrial requirements in terms of crevice-free installation. The pressure switch provides long-term stable absolute or gauge pressure measurement of liquids and gases as well as hydrostatic level measurement. ...
Krohne - Model SHD 200 - Unit for Control and Monitoring of Process Parameters
The SHD 200 is a unit for control and monitoring of process parameters in various industry applications. It is suitable for connecting to all loop-powered field devices with 4…20 mA output and/or HART communication. The SHD 200 exceeds the functionality of an ordinary display. It features different customer-specific measurement pages displaying up to 4 different values for detailed process monitoring (incl. trend ...
OPTIWAVE - Model 5400 - 2-Wire 24 GHz Radar (FMCW) Level Transmitter for Liquids in Basic Process
The OPTIWAVE 5400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in basic process applications. It is particularly designed for continuous, non-contact level measurement in the chemical, petrochemical, power as well as oil and gas industry. It can be equipped with a PP Drop antenna for condensing atmospheres and corrosive media but features also Metallic Horn antennas. Due to its high dynamic range, the 24 GHz radar can measure distances ...
OPTIWAVE - Model 6500 - 2-Wire 80 Ghz Radar (FMCW) Level Transmitter for Powders and Dusty Atmosphere
The OPTIWAVE 6500 is a 2-wire 80 GHz radar (FMCW) level transmitter for demanding applications with powders in very dusty atmospheres. With its small beam angle, this radar is particularly suited for continuous, non-contact level measurement in high and narrow silos, hoppers or buffer storage containers up to 100 m / 328 ft. Due to specific algorithms and the high signal dynamics of the FMCW radar, the level transmitter is ideal for low-reflective ...
OPTIWAVE - Model 7400 - 2-Wire 24 Ghz Radar (FMCW) Level Transmitter For Liquids In Harsh Environments
The OPTIWAVE 7400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in harsh environments like tanks with agitators containing corrosive media. It is particularly designed for continuous, non-contact level measurement under extreme conditions prevalent in the chemical, petrochemical, power, metal or oil and gas industry. The device features Metallic Horn antennas as well as PTFE and PEEK Drop antennas for measuring distances up to 100 ...
OPTIWAVE - Model 7500 - 2-Wire 80 Ghz Radar (FMCW) Level Transmitter for Liquids In Narrow Tanks With Internal Obstructions
The OPTIWAVE 7500 is a 2-wire 80 GHz radar (FMCW) level transmitter for demanding liquid applications involving narrow tanks with long nozzles and internal obstructions like agitators or heating coils. Its very small beam angle and negligible dead zone make this FMCW radar the optimal choice for continuous, non-contact level measurement in both extremely small and very high tanks (up to 100 m / 328 ft). The level transmitter is even able to ...