7 products found
Layne Bowler Pump Company Inc. Products
-
Vertical Turbine Pump
Vertical turbine pumps are firstly invented by Mr. M. Layne and adapted for use in cased wells or where the water surface is below the practical limits, where other pumps can not do the same job. Vertical Turbine pump efficiencies are comparable to or greater than most centrifugal pumps. The Vertical Turbine Pumps have three main parts: the head assembly, column assembly and the pump bowl assembly. The shaft and column assembly provides a connection ...
-
Submersible Pump
A submersible pump is a turbine pump close-coupled to a submersible electric motor. Both pump and motor are suspended in the water, thereby eliminating the long drive shafts and bearing retainers required for a deep well turbine pump. Because the pump is located above the motor, water enters the pump through a screen located between the pump and motor. The pump curve for a submersible pump is very similar to a vertical turbine ...
-
Axial Pump
In the need of low head high capacity pumping applications, axial pumps are used. The importance or the use age of this type of pumps is daily increasing specially with the change of climatic conditions in the world, which is leading to uncontrolled ...
-
Sewage Pump
Sewage pumps are used to pump solids, semi-solids and small solids in a variety of commercial, industrial, maritime, municipal, and wastewater treatment applications. Important specifications for sewage pumps include maximum discharge flow, maximum discharge pressure, inlet size, discharge size, and motor power. Sew Line pumps are composed of a rotor and impeller, which have a common shaft aligned by bearings. To prevent leakage of water, high quality ...
-
Single Stage Norm Centrifugal Pump
Horizontal, radially split volute casing type, single stage, end suction centrifugal pump with enclosed impeller. Dimensionally complies with DIN 24255 / EN 733.In addition to 29 basic sizes conforming with DIN 24255 / EN 733, there are 20 additional sizes. Dimensions of additional sizes can differ from other suppliers. The suction and discharge flanges are conforming to DIN 2533, PN 16. Due to the back-pull-out design the complete bearing assembly ...
-
Multistage Centrifugal Pump
Horizontal ring section multistage centrifugal pumps with closed impellers and diffusers. 9 models from DN 32 to DN 200. Suction nozzle flanges are according to DIN 2533 / PN 16 and discharge nozzle flanges are according to DIN 2535 / PN 40 (DIN 2546 / PN 64). In standard production suction flange is placed on the right side and close to the coupling and discharge flange is at the other end and at top. Suction and discharge nozzle can be turned in ...
-
Model Type SKMV-H - Vertical Multistage Centrifugal Pump
Vertical, multistage centrifugal pumps with closed impellers and diffusers. Suction nozzle flanges are according to DIN 2533 / PN 16 and discharge nozzle flanges are according to DIN 2535 / PN 40. Axial thrust is balanced by back wear ring and balancing holes in each impeller. Pump impellers are balanced statically and dynamically according to ISO 1940 class 6.3. Pump shaft is coupled with standard motor shaft by means of a flexible ...