11 products found
LivestockEquipment.Co.UK Products
-
Cattle Handling Equipment
-
Model Mk I & Mk II - Mobile Livestock Handler
Following the success of our Mk I Handler, over 15 years, with more than 500 machines throughout Britain, we now introduce the Mk II. The Mk II has a Vari Width Full Access Crush and now has 8 nine-foot gates all hung on the crush. No lifting, with each set of four gates concertinaing together in ...
-
Swingarm Superscoop
Designed to immobilize the animal's head side to side movement. The rubber lined scoop dramatically reduces the available movement of the animal's head. It helps reduce the desire to move backwards and to kick out. It fits onto all our crushes using a special ...
-
Weigh Platform
Can be used inside cattle crush, outside in a race or against an existing wall or fence. Made from non-slip 6mm aluminium treadplate, it is easily handled and transported. Normal size: 8ft x 30in, but can be made any size to ...
-
Model Mini - Mobile Cattle Handler
This Crush is a smaller version of our now well established Mobile Cattle Handler . Easily towed by 4x4 vehilce and is available with overrun breaks and lights. The Crush is full access and variable in width to suit all sizes of cattle from calves to adults. Hurdles can be carried in the Crush. Foot trimming is available, also a cattle head ...
-
Heavy Duty Fully Galvanised Cattle Crush
A heavy duty fully galvanised cattle crush with the latest head yoke fully adjustable for large and small animals. Four pressed steel doors on each side of the crush allow complete access with no vertical or horizontal bars. All doors open fully outwards for clipping and if an animal goes down during calving it can rise with ...
-
Cattle Squeeze Crushes
This Crush is the ultimate in cattle handling. The Crush sides squeeze the animal, as the sides come in they also lift to prevent any damage to the animal's feet. The Crush is available as a manual squeeze operated with a dual action hand pump. Also available to operate by remote control through an electro hydraulic pump (as shown). This operates the head yoke and side squeeze. This is an extremely fast way of securing even the wildest animals. The Crush ...
-
Rollover Cattle Foot Trimming Crush
Crush transported on 3 point linkage or fork lift from all four sides. Operators platform folds up in ...
-
Sheep Feeding Equipment
-
Sheep Feed Trailer
Silage from clamp to sheep without waste. Suitable for round bales or clamp silage. Use outside or inside. 12' long, 4' wide. Robust box steel frame. 3/4' ply-board floor & side. Optional lamb rails available. Optional GREEDY boards ...
-
Sheep Handling Equipment
-
Mobile Sheep Handler System
The Mobile sheep handler that lowers to the ground. This allows easy access to both the sheep and the shepherd. A small hydraulic hand pump and ram raises the trailer within a few seconds AND you are off to the next ...
-
Sheep Turnover Crate
The Ewe-Turn Rollover Crate can be fitted into any race system. It can be set up for either right or left-handed operation. The sheep simply walks into the crate and is clamped. A foot pedal is released to allow the sheep to be tilted towards the operator. It is then just a matter of turning the sheep over where it is ready for attention, with clear access to the feet, head, udder, rear end, etc, without any clutter in the ...
-
Sheep Footbaths
Narrow Footbath: 8ft long, 17" tall sides, and the ends are 7" and 9". This keeps the solution inside the bath and prevents waste. Wide Footbath: 8ft long, 37" wide, 6" deep. Complete with a one metre guillotine gate and sheeted side hurdles. No waste or splashes, as hurdles slightly inside bath. Free standing or in a race or pen. Sturdy and safe to operate. All footbaths have weldmesh on the bottom to stop animals slipping and to open ...