93 products found
products
-
Datalogger
-
Logotronic - Model QTRACE - Datalogger
Flow measurement according to the salt dilution method, for watercourses with strong turbulence or missing measurement ...
-
Gealog - Model TG - Datalogger
Datalogger for demanding measurement ...
-
Gealog - FTP Module
The Gealog ftp Module is a snap-on module for DIN-rail mounting and 12V battery operation.It has a Gealog RS485-Fieldbus interface for connecting Gealog sensors or Gealog Measuring Interfaces. Because of this modular concept the Gealog ftp-module can be operated with various sensors. Additionally the Gealog ftp-Module has a serial interface for connecting the Gealog GSM/GPRS Modem. A configurable set of parameters defines the data recording and data ...
-
Logotronic - Gealog Micro Datalogger
The datalogger Gealog micro is especially suited for all applications requiring high reliable registration of water level and water temperature made under very harsh environmental conditions. It is installed into ground water pipes with diameters from 2 inch onward. The water level is measured by a high precision pressure sensor, the water temperature by an integrated temperature sensor. Atmospheric air pressure variations are compensated by a capillary ...
-
Eureka
-
Manta+ - Logotronic Delivers Multi Probes
Logotronic delivers since many years water quality monitoring equipment. With Eureka we found the perfect partner, which supplies us with multiparmaterprobes. Eureka probes can be operated stand-alone or in combination with the GEALOG ...
-
Eureka - Multiparameter Probe Trimeter
Logotronic has been active in the water quality monitoring sector for years. To complement our own products, a few years ago we took over the representation of Eureka, one of the world’s most renowned producers of multiparameter probes. Eureka multiparameter probes can be used stand-alone for e.g. manual measurements or autonomous long-term registration, or they can be connected to a Gealog measuring station for e.g. remote data transmission to the ...
-
Eureka - Accesories
Eureka offers a wide range of accessories for the multi-parameter ...
-
Eureka - Water Quality Measuring Stations
Quality measurement of surface waters with state-of-the-art sensor technology. Logotronic integrates a wide variety of sensors for water quality measurement in measuring stations. In addition to the products of our partner Eureka, we also offer individual sensors from different manufacturers for connection to our measuring system. The measuring stations are either mounted on land or on floating platforms. With the integration into Gealog Net, you can ...
-
Solinst Dipmeters
-
Solinst - Water Level Meter
Solinst water level meters are designed for mobile use. For daily use, special attention is paid to a robust ...
-
Solinst - Model 101B - Solid Entry-Level Instrument for Level Measurement
The model 101B is the entry-level product for water level measurement at groundwater measuring points. The level meter is qualitatively on the same level as the other models, it has been reduced to the most important functions. The groundwater level as well as the position of the probe can be read off the durable plastic measuring tape. The measuring tape is available in lengths of up to 100m, with a matching drum. Furthermore, the tape measure offers ...
-
Solinst - Model 101 - Water Level Meters
In addition to the basic functions of the Model 101, it is possible to regulate the sensitivity of the measuring probe. This makes it possible to eliminate sources of interference and achieve reliable, reproducible measurement results. Measuring tapes are available up to a length of 600m and also as a PVDF version. Two different probes (P2 and P7) also meet higher demands on the measuring instruments. With watertightness and special design for measuring ...
-
Solinst - Model 107 - Water Level Meter
The Model 107 is ideal for profiling conductivity and temperature in wells and open water. It displays accurate measurements of conductivity and temperature on a convenient LCD ...
-
Solinst - Model 201 - Water Level Temperature (WLT) Meter
The Model 201 Water Level Temperature (WLT) Meter is ideal for measuring static water levels, as well as profiling temperature in wells, boreholes, tanks and open ...
-
Meteorology - Weather Station
-
Logotronic - Automatic Weather Station
Weather stations according to WMO standards for permanent observation. Logotronic weather stations are built according to a modular principle. This modularity allows a variety of different measuring instruments to be connected to the weather station. The stations are designed for all-year outdoor use even under harsh conditions. Please feel free to contact us for individual ...
-
Logotronic - Portable Automatic Weather Station
Flexible solutions for measuring meteorological parameters. Our portable weather stations are designed for quick disassembly and transport. Nevertheless, they have the same high quality and are equal in scope to stationary ...
-
Hydrology
-
Logotronic - Hydrological Measuring Stations
Extensive observation of precipitation, solar radiation, temperature ...
Products by
-
Water and Wastewater Sequential Portable Samplers
-
Teledyne Isco - Model 6712 - Full-Size Portable Water Sampler
The 6712 Portable Sampler features a vacuum-formed ABS plastic shell to withstand exposure and abuse. Its tapered design and trim 20-inch (50.8 cm) diameter result in easy manhole installation and removal. Large, comfortable handles make transporting safe and convenient - even when wearing gloves. The NEMA 4X, 6 (IP67) enclosure is submersible, watertight, and dust-tight. Plug-in 700 Series Modules and the SDI-12 interface make it easy to add flow and ...
-
Teledyne Isco - Model 6712C - Compact Portable Water Sampler
The 6712C compact model gives you the world's most versatile sampler controller in a smaller-diameter package that fits in 18' and offset manholes. Large, comfortable handles make transporting safe and convenient - even when wearing gloves. The NEMA 4X, 6 (IP67) enclosure is submersible, watertight, and dust-tight. Plug-in 700 Series Modules and the SDI-12 interface make it easy to add flow and parameter monitoring to your 6712-based ...
-
Teledyne Isco - Model 3700 - Full-Size Portable Water Sampler
The full-featured 3700 Sampler collects sequential or composite samples based on time, flow rate, or storm conditions. It's a great choice if you don't need the sophisticated parameter monitoring and logging capabilities of our 6700 Series. The exclusive LD90 gives you automatic compensation for changes in head height, plus automatic suction line rinsing to prevent cross contamination. The non-contacting liquid sensor is not affected by conductivity, ...
-
Teledyne Isco - Model 3700C - Compact Portable Water Sampler
Smaller and lighter than our full size 3700 portable, the 3700C uses the same controller. The 3700C will easily pass through an 18-inch diameter or offset manhole. Bottle choices with the 3700C are more limited than with the full-size model. The five bottle options include 350 ml glass or polyethlyene, 500 ml polyethylene, or 2.5 gallon glass or poly. The 3700C's bottle cartridge makes bottle changes fast and ...
-
Composite-Only Portable Water and Wastewater Samplers
-
Teledyne Isco - Model GLS - Compact Composite Water Sampler
The GLS Sampler is designed for general purpose or priority pollutant sampling in municipal and industrial applications where a full-size sampler is too large. It collects composite samples, based on time or flow intervals, in 1- or 2.5-gallon glass or polyethylene bottles, or in 2-gallon disposable ProPak® ...
-
Teledyne Isco - Model 3710 - Composite-Only Portable Water Sampler
The 3710 Sampler combines simple operation and high volume capacity for single-bottle sampling. It collects composite samples - based on time or flow intervals - in a 2.5 gallon glass or polyethylene bottle, or a 4 gallon polyethylene bottle. Up to 24 sampling stop and resume times can be preset for unattended, automatic ...
-
Water and Wastewater - Refrigerated Samplers
Isco developed the first refrigerated sampler designed for use outdoors without an enclosure, and continues to set the standards for weather and corrosion resistance. The Isco 5800 Refrigerated Sampler is designed to survive outdoors for wastewater compliance monitoring. Our 6712FR refrigerator gives you field-proven, trouble-free sample preservation and dependability in harsh environments, along with the most advanced sampler controller available.
-
Teledyne Isco - Model 5800 - Sequential/Composite Sampler
The 5800 Refrigerated Sampler is Teledyne ISCO's answer to the rigorous demands of water monitoring. With user-friendly controls and task accommodating features, the 5800 is the only choice for stationary sampling in both municipal and industrial wastewater applications. The controller actively regulates and displays the sample compartment temperature, and logs a 24-hour summary to confirm proper sample cooling. Not only can you download the temperature ...
-
Teledyne Isco - Model 6712FR - Fiberglass Refrigerated Sampler
The 6712FR is a sequential or composite refrigerated sampler designed to withstand the harshest indoor or outdoor environments. It features our unequalled "FR" model corrosion-proof refrigerator cabinet molded from polyester resin fiberglass and supported by a stainless steel frame. A UV-resistant gel coat provides a smooth, non-porous finish for added protection and easy cleaning. Thick, foamed-in-place insulation helps keep samples preserved at the ...
-
Water and Wastewater - Portable Refrigerated Samplers
The Avalanche and Glacier Samplers combine the small size, light weight, and mobility of a portable with an exclusive new active temperature control system. The revolutionary design gives you the best of all worlds: easy transport, quick setup, and accurate sample preservation – without reliance on ice or utility power! An optional Mobility Kit with aluminum frame and pneumatic tires lets you wheel these unique samplers even over rough terrain to remote sampling sites.
-
Isco Avalanche - Multi-Bottle, Multi-Function Water Sampler
The Avalanche Sampler is based on the industry-leading 6712 controller. Avalanche provides the advanced control, data logging, and communication features of the 6712, combined with on-the-go cooling from either AC power or a 12-volt deep cycle battery. Bottle configurations include 5 gallon and 2.5 gallon composite as well as 4 x 1 gallon and 14 x 950 ml ...
-
Glacier - Composite Water Sampler
The Glacier Sampler combines the small size, light weight, and mobility of a portable with an exclusive new active temperature control system. Its revolutionary design gives you the best of all worlds: easy transport, quick setup, and accurate sample preservation – without reliance on ice or utility power! An optional Mobility Kit with aluminum frame and pneumatic tires lets you wheel Glacier even over rough terrain to remote sampling ...
-
Specialty Water and Wastewater Samplers
Isco offers a wide range of accessories and customization capabilities to adapt our samplers for practically any application. We also offer purpose-designed samplers for two specialized application areas: refrigerated sampling in hazardous areas up to Class 1, Div 1; and sampling of environmental water to be tested for specific radioactive contaminants.
-
Teledyne Isco - Model 3700ZR Class I, Div 1 - Refrigerated Sampler
The Teledyne Isco 3700ZR is the only refrigerated sampler that is UL-approved for locations where atmospheres have been designated Class I, Division 1 (or comparable). The design is based on Teledyne Isco’s field-proven 3700 controller and stainless steel clad refrigerator. Most programming and control features offered on standard Isco 3700 models are available on the 3700ZR, as are sample container configurations using 1 or 2 bottles (glass or ...
-
Teledyne Isco - Model 3710 RLS - Simplifies Monitoring for Radionuclides in Water
The 3710 RLS is an Isco Model 3710 Sampler, specially modified to collect radionuclide samples using 3M Empore™ Rad Disks. The Empore disks selectively trap radionuclides, which are then analyzed to find concentration levels. In addition, the amount of sample flowing through the disk is known, allowing specific loading effects of the pollutant to be ...
-
Teledyne Isco - Model CVE-16 - Explosion Proof Refrigerated Composite Vacuum Wastewater Sampler
Build thought for tough duty, our CVE-81 Explosion Proof Vacuum Sampler will handle hazardous duty in Class I, Groups C and D, Class II, Groups E, F, and G, and Class III. It features electromechanical controls, including programmable timed-interval control with contact closure, automatic pre and post intake line purge, on/off switch and manual push button. The controls are mounted inside an explosion proof box located on top of the stainless steel ...
-
Water and Wastewater - Vacuum Samplers
-
Teledyne Isco - Model Optima-QLS - Season Refrigerated Composite/Sequential Vacuum Wastewater Sampler
The model Optima-QLS is a heavy duty, All Season refrigerated composite/sequential vacuum wastewater sampler. With a fiberglass base and body, the All Season unit is suitable for corrosive environments and severe outdoor conditions. This sampler relies on proven vacuum pump technology to deliver high sample integrity and reliable performance. The vacuum pump exceeds EPA transport velocity requirements and generates a stronger pulse. The maximum vertical ...
-
Teledyne Isco - Model Optima CVE-16 - All Season Refrigerated Composite/Sequential Vacuum Wastewater Sampler
The model Optima CVE-16 is a heavy duty, All Season refrigerated composite/sequential vacuum wastewater sampler. With a fiberglass base and body, the All Season unit is suitable for corrosive environments and severe outdoor conditions. It relies on proven vacuum pump technology to deliver high sample integrity and reliable performance. The vacuum pump exceeds EPA transport velocity requirements and generates a stronger pulse. The maximum vertical lift is ...
-
Teledyne Isco - Dual All Season Refrigerated Vacuum Wastewater Sampler
The Dual All Season sampler is a Heavy Duty, All Season refrigerated vacuum wastewater sampler with two independent samplers in one refrigerated enclosure. With a fiberglass base and body, this All Season unit is suitable for corrosive environments and sever outdoor conditions. It relies on proven vacuum pump technology to deliver high sample integrity and reliable performance. The vacuum pump exceeds EPA transport velocity requirements and generates a ...
-
Teledyne Isco - Model Century 3000-QLS - Indoor Refrigerated Composite/ Sequential Vacuum Wastewater Sampler
Built tough for tough duty, the Century 3000-QLS is our refrigerated vacuum wastewater sampler. It relies on proven vacuum pump technology to deliver high sample integrity and reliable performance. The vacuum pump exceeds EPA transport velocity requirements and generates a stronger purge. The maximum vertical lift is 28 feet. This unit uses a self learning smart sampling system. A two year warranty is ...
-
Teledyne Isco - Model Century 3000-CVE-16 - Indoor Refrigerated Composite/ Sequential Vacuum Wastewater Sampler
Built tough for tough duty, the Century 3000-CVE-16 is our refrigerated vacuum wastewater sampler. It relies on proven vacuum pump technology to deliver high sample integrity and reliable performance. The vacuum pump exceeds EPA transport velocity requirements and generates a stronger purge. The maximum vertical lift is 23 feet on a standard unit, and 28 feet is available as an option. A two year warranty is ...
-
Teledyne Isco - Indoor Wall Mount Composite Vacuum Wastewater Sampler
The CVE-16-WM and WM-QLS wastewater samplers are wall mounted vacuum wastewater samplers. Each relies on proven vacuum pump technology to deliver high sample integrity and reliable performance. The vacuum pump exceeds EPA transport velocity requirements and generates a stronger purge. The maximum vertical lift is 23 feet on a standard unit, and 28 feet is available as an option. A two year warranty is ...
-
Teledyne Isco - Model CVE-16-P - Portable Composite/Sequential Vacuum Wastewater Sampler
The model CVE-16-P is our portable, composite/sequential vacuum wastewater sampler. It relies on proven vacuum technology to deliver high sample integrity and reliable performance. The vacuum pump exceeds EPA transport velocity requirements and generates a stronger purge. The maximum vertical lift is 23 feet on a standard unit, and 28 feet is available as an option. This portable unit is double walled, insulated, and has a rotationally molded polyethylene ...
-
Water and Wastewater Sampling - 700 Series Modules
Now you can collect samples and measure flow or water quality parameters with one advanced sampler. Simply plug one of the 700 Series Modules into your 6700 Series Sampler (including 6712 and Avalanche models) to add the capability you need. These environmentally-sealed modules can be interchanged in the field, and can be added to your Isco system at any time. The 700 Series Modules bring “Plug and Play” to the world of water quality monitoring!
-
Teledyne Isco - Model 701 - pH/Temperature Module
Plug the 701 module into your 6712 Sampler, and place the streamlined stainless steel sensor in the flow stream for accurate monitoring and logging of pH and temperature. Additionally, you can trigger the sampler to collect samples only when a specific limit is exceeded. This can be done for the entire sampling program, or you can collect separate samples of independent volumes when the parameters exceed your programmed limits. Save time and money by ...
-
Teledyne Isco - Model 710 - Ultrasonic Flow Module
Plug in a 710 Flow Module and turn your 6700 Series or Avalanche Sampler into a combination sampler and flow meter. The Ultrasonic sensor is mounted above the flow stream, and it transmits a sound pulse that is reflected by the surface of the flow stream. The elapsed time between pulse and echo determines the level of liquid in the channel. The liquid level is then converted into flow rate by the sampler controller. A built-in temperature probe in the ...
-
Teledyne Isco - Model 720 - Submerged Probe Flow Module
The probe on the Isco 720 is mounted at the bottom of the channel, and uses a differential pressure transducer to measure the level of the flow stream. The 6712 Sampler then converts this depth measurement into flow rate. The probe's venting system automatically compensates for changes in atmospheric pressure to maintain accuracy. The 720 provides accurate measurement at sites where wind, steam, foam, turbulence or air temperature fluctuations exist. The ...
-
Teledyne Isco - Model 730 - Bubbler Flow Module
Isco 730 Bubbler Flow Modules use an internal air compressor to force a metered amount of air through a bubble line submerged in the flow channel. By measuring the pressure needed to force air bubbles out of the line, the water level is accurately determined. The 6712 Sampler then converts this level into flow ...
-
Teledyne Isco - Model 750 - Area Velocity Flow Module
The sensor on the 750 module uses patented Doppler technology to directly measure average velocity in the flow stream. An integral pressure transducer measures liquid depth to determine flow area. The 6712 sampler then calculates flow rate by multiplying the area of the flow stream by its average ...
-
Teledyne Isco - Model 780 - Analog Output Flow Module
The 780 Smart 4-20 Module gives your Isco 6700 Series Sampler the capability to interpret analog data from other equipment that you already own. For example, if you have flow meters that output a 4-20 mA signal, the 780 Module allows you to use that flow signal to pace your 6700 or 6712 sampler. The sampler with 780 module also converts the signal into digital information that can be displayed in real time and stored for future retrieval and analysis ...
-
Water and Wastewater Open Channel Flow Monitoring - 2100 Series Flow Modules
Teledyne Isco’s 2100 Series offers flexible, modular design and easy configuration for a wide range of networked open-channel flow monitoring applications, including Inflow and Infiltration studies, CMOM and AMP data collection, and river monitoring. Compact, stackable, NEMA 4x, 6P (IP68) modules snap together to provide the capabilities needed for practically any site and monitoring requirement.
-
Teledyne Isco - Model LaserFlow™ 2160 - Area Velocity Module
2100 Series modularity with advanced non-contacting laser Doppler technology. The 2160 LaserFlow Module uses non-contact Laser Doppler Velocity technology and non-contact Ultrasonic Level technology to remotely measure open-channel flow. The sensor has advanced technology to measure velocity with a laser beam at single or multiple points below the surface of the wastewater ...
-
Teledyne Isco - Model 2150 - Area Velocity Flow Module
The 2150 Flow Module uses continuous wave Doppler technology to measure mean velocity. The sensor transmits a continuous ultrasonic wave, then measures the frequency shift of returned echoes reflected by air bubbles or particles in the ...
-
Water and Wastewater - ADFM Velocity Profiling Flow Meters
The ADFM product family uses exclusive pulse-Doppler velocity profiling technology to measure the velocity distribution within the flow, delivering advanced flow measurement performance. This capability makes ADFM flow meters exceptionally versatile - and the most suitable choice for metering sites at large pipes and open channels, particularly those with non-uniform, rapidly changing, backwatered, near zero, zero, or reverse flow conditions.
-
Teledyne Isco accQpulse™ - Velocity Profiler
The accQpulse™ Velocity Profiler brings unparalleled measurement precision and accuracy to flow rate measurement in many sizes of pipes and open channels. Its unique ability to measure velocity at multiple points makes it suitable for most applications including sites with non-uniform, rapidly changing, near zero, or reverse flow conditions. These applications include: wastewater collection systems, billing, combined sewer systems and outfalls, ...
-
H-ADFM - Open Channel Velocity Profiler
The introduction of the revolutionary H-ADFM Flow Meter has made pulse Doppler technology available for open channel applications 10 feet in width and greater. The H-ADFM has set a new standard for flow rate measurement accuracy that previously was not attainable in wide channel ...
-
Water and Wastewater - Flow Meter Products
-
Signature - Flow Meter
Flexible, configurable flow meter for permanent discharge compliance monitoring. The Signature flow meter is designed for open channel flow monitoring applications. It supports flow measurement technologies including bubbler, non-contact laser area velocity, submerged Doppler ultrasonic area velocity, and ultrasonic. The meter can calculate flow using standard open channel level-to-flow and area velocity conversions, as well as user-defined equations, ...
-
Teledyne Isco LaserFlow - Non-Contact Water Velocity Sensor
The LaserFlow velocity sensor remotely measures flow in open channels with non-contact Laser Doppler Velocity technology and non-contact Ultrasonic Level technology. The sensor uses advanced technology to measure velocity with a laser beam at single or multiple points below the surface of the wastewater stream. The sensor uses an ultrasonic level sensor to measure the level and determines a sub-surface point to measure velocity. The sensor then focuses ...
-
ProPak - Sample Bags
These convenient, single-use sample bags bring a new dimension of productivity to your water and wastewater sampling. Using the patented Teledyne ISCO ProPak sample bag will reduce your sampling costs by eliminating the expense of washing and storing conventional bottles while, at the same time, eliminating worries about contamination from previous samples. For SW846 trace metals analysis, testing shows that ProPaks yielded results equivalent to glass ...
-
Teledyne Isco - Model 3010 - Ultrasonic Flow Transmitter
The 3010 is AC powered for permanent installation. It has no internal data storage, but provides 4-20 mA analog and RS-232 serial outputs, as well as relay switches and pulsed DC totalizer outputs for flexible interfacing and control. The ultrasonic level sensor is mounted above the flow stream and transmits a sound pulse that is reflected from the liquid surface. The elapsed time between sending a pulse and receiving an echo determines the level in the ...
-
ProHanger - Suspension Bracket
The ProHanger is designed to provide an easy, secure means of suspending down-hole equipment, eliminating the need to enter a manhole. It’s easily adjustable, and features double wingscrew locks. The low-profile tabs allow manhole covers to be set back in place while remaining flush with the surface. We also offer stainless steel suspension harnesses for Isco portable samplers. The harness clips directly to the ProHanger, making sampler placement ...
-
Teledyne Isco - Flow-Through Sample Chamber
The Teledyne ISCO high temperature flow-through chamber makes "dipper" type samplers obsolete, and is ideal for large treatment plants with multiple sampling points spread over a large area. This device allows you to eliminate time-consuming trips to retrieve samples from remote monitoring points. By installing flow-through chambers on transfer lines from monitoring points within your plant, you can collect all your samples in one convenient, central, ...
-
Teledyne Isco - Model 6712 and 5800 - Pressurized Line Accessory
This accessory was developed to allow sampling from liquid sources with pressure ratings between 10 and 300 psi. Initially, a stainless steel pressure reduction valve decreases source pressure to an acceptable level (10 ...
-
Avalanche - Model 6700 Series - Water Sampler CDMA Cellular Modem
Teledyne ISCO 6712 and Avalanche® portable samplers are often deployed in locations that lack utility lines. This cellular modem provides wireless digital communication, reducing the need for costly trips to monitoring sites that are distant and/or difficult to get to, including rural watersheds as well as manholes in high-traffic urban arterials. It allows the sampler to transmit text message alarms to a text-enabled phone or pager, and to ...
-
Teledyne Isco - Model 6700 Series - GSM Cellular Modem for Samplers
This digital cellular phone modem enables Isco 6712 samplers (including Avalanche models) to transmit text message alarms to a text-enabled phone or pager. It also allows the sampler to communicate with a modem-equipped PC for remote data retrieval and control. The modem is compatible with user-subscribed GSM digital cell phone service (such as ATT/Cingular, T-Mobile, and Vodaphone). GSM service is available throughout most of Europe, and is increasingly ...
-
Water and Wastewater - AQ700 Multi-Parameter Probes
The AQ700 from Teledyne Isco comprises up to six different sensors in a single sonde, for a total of ten possible measured parameters. All AQ700 data stored by the sampler or logger is ready for retrieval, reporting, and graphing using Teledyne Isco Flowlink software. The AQ700`s ease-of-use design includes direct USB connection to your computer, real-time data viewing, and LED indicators for operating status.
-
Teledyne Isco - Model AQ702 - Water Quality Multi-Parameter Probe
Depending on your monitoring requirements, the AQ702 can operate with any of the following Teledyne Isco instruments: 6712 Series Samplers. Avalanche Portable Refrigerated Sampler. Signature Flow Meter. 2105 Interface ...
-
Teledyne Isco - Model AQ703 - Multiparameter Probe
Depending on your monitoring requirements, the AQ703 can operate with any of the following Teledyne Isco instruments: 6712 series samplers, avalanche portable refrigerated sampler, signature flow meter, 2105 interface ...
-
Water and Wastewater - Teledyne ISCO Flow Meters
-
Teledyne Isco - Model QC-DT-1 - Hybrid Ultrasonic Flowmeter
The QC-DT-1 Hybrid Ultrasonic Flow Meters can measure fluid flow in virtually any fluid in which sound waves can travel. The QC-DT-1 meters are considered "hybrid" because they can measure fluid flow using either the Doppler or Transit Time methods. The QC-DT-1 ultrasonic sound transducers are clamped to the outside of the pipe wall and include no moving parts. This method of flow measurement is safe, non-intrusive, and very easy to ...
-
Legacy Water and Wastewater Sampler Products
-
Teledyne Isco - Model 5800 - Sequential/Composite Sampler
The only choice for stationary sampling in both municipal and industrial wastewater applications . The 5800 Refrigerated Sampler is Teledyne ISCO's answer to the rigorous demands of water monitoring. With user-friendly controls and task accommodating features, the 5800 is the only choice for stationary sampling in both municipal and industrial wastewater ...
-
Chromatography - CombiFlash Systems
Whether your main interest is throughput, ease of use, or flexibility of scale and separation methods, there is a CombiFlash system to fit your workload and automation needs. Rely on CombiFlash from Teledyne Isco for superior performance in organic purification. Check out the CombiFlash EZ Prep to discover Isco’s latest advances in chromatography which offers Flash and Prep HPLC in one compact system.
-
CombiFlash - Model EZ Prep - Streamline Flash and Preparative HPLC Chromatography
Streamline Flash and Preparative HPLC chromatography with a compact, easy-to-operate unit. The CombiFlash EZ Prep offers streamlined Flash and Prep HPLC chromatography in one compact, easy-to-operate unit. With just two clicks, users can switch from pre-purifying samples on Flash to generating submission-quality compounds on Prep HPLC. Teledyne Isco's RFID-encoded collection racks ensure proper loading every time and allows users to hot-swap racks during ...
-
CombiFlash - Model Rf+ - Automated Flash Chromatography System
The CombiFlash Rf+ improves your productivity whether you purify synthetic compounds, natural products, peptides, or polymers. With operating pressures up to 200 psi (13.8 bar) the CombiFlash Rf+ is compatible with both normal and reversed phase purification conditions. The TLC to Gradient calculator automatically determines optimal separation parameters while minimizing run ...
-
CombiFlash - Model Rf+ PurIon - Automated Flash Chromatography System
The CombiFlash Rf+ PurIon takes the guesswork out of your purification routine with mass directed purification. Identify your peak of interest at the time of elution with the advantage of targeted fraction collection. Simply instruct the Flash system to collect only those peaks matching the mass of your target compound, eliminating the need for further analysis and saving time in post-purification processing. As with all other CombiFlash models, Teledyne ...
-
CombiFlash - Model Rf+ Lumen - Flash Chromatography System
The smallest Flash system with integrated UV, UV-Vis, and ELS detection. The CombiFlash Rf+ Lumen system enhances detection capabilities with an integrated evaporative light scattering detector (ELSD). In addition to UV or UV-Vis detection for absorbing compounds, the ELSD detects compounds with little or no chromophores such as carbohydrates, steroids, and lipids. The integrated ELSD conserves valuable bench ...
-
CombiFlash - Model Rf 150 - Delivers Reversed Phase Purification System
The CombiFlash Rf 150 delivers reversed phase purifications at a fraction of the cost of preparative HPLC. The system operates at pressures up to 150 psi (10.3 bar) for your separation needs. The rugged construction you have come to expect from Teledyne Isco makes this a daily workhorse for your demanding ...
-
CombiFlash - Model Torrent - Flash Purification Chromatography System
Get the ease of use and reliability provided by CombiFlash and RediSep for Development Scale purification with the CombiFlash Torrent Purification System from Teledyne ISCO. One liter per minute flow rates rapidly purify up to 300 grams of sample. The 100 psi pumps accurately deliver a reproducible binary gradient. The CombiFlash Torrent system is designed to be flexible for a variety of large-scale purification needs, with various methods of sample ...
-
Chromatography Products
-
ACCQPrep - Model HP125 - High Performance Preparative Liquid Chromatography (HPPLC) System
The Teledyne Isco ACCQPrep HP125 was developed and designed with the ease of a Flash system in mind. It does not follow the traditional path of an analytical system, but rather this system has been designed to be intuitive and easy-to-use. The ACCQPrep HP125 eliminates the unnecessary and complex integration parameters found in many of the HPPLC systems in today's market. Our PeakTrak software, which currently drives our CombiFlash product line, is the ...
-
RediSep - Model Rf Media - Preparative Chromatography System
Teledyne Isco’s reliable RediSep Rf preparative chromatography products are designed to consistently produce high purity ...
-
PurIon - Mass Spectrometer
The PurIon Mass Spectrometer can interface with any CombiFlash Rf+, CombiFlash EZ Prep, or ACCQPrep to add mass directed fractionation to your purification. Teledyne Isco's ...
-
Chromatography - Automation Modules
Teledyne Isco`s Automation Modules, the AutoInjector, AutoSampler, and Column Selector, work in conjunction with the CombiFlash EZ Prep and ACCQPrep HP125 to unburden the user from some of the mundane tasks involved with preparative liquid chromatography. These three modules can be added to the instruments individually or in combination with one another for even more automated control.
-
AutoInjector - Automation Modules
Designed for users who need to make multiple purification runs. The AutoInjector is designed for the user who needs to make multiple purification runs on the same sample. Simply input the volume of the sample you have and the number of injections needed for ...
-
AutoSampler - Automation Modules
If you have several different samples to purify, the AutoSampler is the right product for you. If you have several different samples to purify which may require multiple injections and different chromatographic conditions, the AutoSampler is the right product for you. Build a simple sample table in seconds, press start, and let the system do the rest. RFID identification on sample load and collection racks eliminates ...
-
Column Selector Module
Automatically switch to a pre-loaded column required for your purification. Define up to four columns and their respective position in the EZ Prep's configuration screen for fast set up. When you select the column needed for your purification, Isco's PeakTrak switches the column selector valve to the correct ...
-
Chromatography - Detectors
-
SofTA - Model 300S ELS - Detector System
The SofTA 300S features an easy to use and learn four-button interface, as well as an informative dual zone display. Instrument output is always displayed, along with other user-selected instrument parameters. Changing the secondary parameter is as easy as using the up and down arrows on the keypad. Priced at thousands less than the competition, the Model 300S is a great choice for demanding ...
-
SofTA - Model 1300 ELS - Detector System
Improved sensitivity in a stackable module. Improved sensitivity in a stackable module, the SofTA 1300 integrates UPLC capability into a package compatible with a typical HPLC or UPLC modular system. Its rugged horizontal package has the strength to be placed anywhere in your component stack. This stackability allows it to be located next to the column outlet, minimizing peak dispersion to attain the highest possible resolution. When it comes time to ...
-
SofTA - Model 2300 ELS - Detector System
UPLC performance with a compact design. SofTA 2300 is designed for use with Rapid Resolution and Ultra Performance LC Systems (UPLC). This instrument is a fast ELS Detectors with peak widths less than 1 second. The narrow peak widths provide an extremely high sample throughput that is required in todays laboratories. Narrow peaks also result in improved signal to noise ratios, making these detectors about two times more sensitive than other ...
-
SofTA - Model 340CF - Preparative Evaportative Light Scattering Detectors (ELSD)
For use with CombiFlash Systems. This detector is a modular component solution for the unique needs of preparative chromatography, allowing you to confidently see compounds without ...
-
Chromatography - Fraction Collectors
Teledyne Isco’s innovative fraction collectors reflect the knowledge that has been gained in over 40 years of experience. Our current lineup of Foxy and Retriever models offer a range of capabilities and capacities to meet practically any need. All feature coldroom-friendly design with moisture-resistant materials.
-
Foxy - Model R1 - Fraction Collector
The one-rack Foxy R1 fraction collector can be adapted to a broad spectrum of applications. The units can distribute fractions into 96 well microplates, standard tube sizes, and bottles. For essentially unlimited volumes, funnel racks can direct fluids to any collection vessel or downstream ...
-
Foxy - Model R2 - Fraction Collector
The two-rack Foxy R2 fraction collector can be adapted to a broad spectrum of applications. The units can distribute fractions into 96 well microplates, standard tube sizes, and bottles. For essentially unlimited volumes, funnel racks can direct fluids to any collection vessel or downstream process. The Foxy R2 fraction collector uses radio frequency identification to automatically detect collection racks for easy ...
-
Retriever - Model 500 - Fraction Collector
Only the size of a notebook page, Retriever 500 still holds over a hundred tubes. More compact than other fraction collectors of similar or less capacity, Retriever 500 takes minimal space in your HPLC or low-pressure LC system, and fits easily in a cramped coldroom. Retriever 500’s multiple-rack, linear-movement configuration lets you remove filled tube groups at any time. A special "stop" rack, color coded red, marks the end of the run, shutting ...
-
Chromatography - Pumps
These sturdy pumps feature low pulsation, self-adjusting cassettes, and reproducible flow rate control.
-
ReaXus - Model 6010R - Reciprocating Pump for Laboratories
The ReaXus 6010R is a high performance reciprocating pump with accurate flow rate control up to 10 mL/min and pressure capability up to 6,000 psi (414 bar). This pump is ideal for reactant feed, core flooding, research and industrial applications. The ReaXus 6010R has an interactive front panel keypad with LED display for easy programming. It can interface with a computer for additional control options and has features for solvent selection ...
-
Teledyne Isco Tris™ - Peristaltic Pump
Tris is a precision pump ideal for packing and eluting columns as well as dozens of other jobs around the lab. With three channels, you can form linear gradients, run three columns at once, or combine flows for controlled flow rates to 1500 mL/hour. Six rollers per channel provide smooth, low pulsation flow. Tris' two ranges, fine dial divisions and precision speed control provide reproducible flow rate setting. Slide switches select direction control and ...
-
Chromatography - Density Gradient Fractionation
-
Teledyne Isco - Programmable Density Gradient Fractionation System
Includes: Isco's tube piercing system; Peristaltic Pump; UA-6 Detector with 254 and 280 nm filters; density gradient flow cell; and Foxy Jr. Fraction Collector ready for microcentrifuge ...
-
Teledyne Isco - Density Gradient Fractionator System
Includes: Isco's tube piercing system; Peristaltic Pump; UA-6 Detector with 254 and 280 nm filters; density gradient flow cell; and Retriever 500 Fraction ...
-
Open Channel Flow Measurement
No single measurement technology is suitable for all open channel flow monitoring applications. Only Isco offers you a choice of ultrasonic, submerged probe, bubbler, and area velocity flow meters. Whether you need a permanent meter for a flume or weir, short term measurement with no primary device, or flow and pump performance monitoring at a lift station, Isco has the solution.
-
Teledyne Isco - Model 2103Ci CDMA - Cellular Modem Module
This cellular modem module is designed to push Isco 2100 Series flow meter data to a remote Flowlink database. Data can also be downloaded from the server using an internet connection. The 2103Ci modem module uses Serial Over Internet Protocol (SOIP), so a landline modem is not required. This ability virtually eliminates the need for routine site visits, time-consuming (and potentially dangerous) confined space entry, as well as costly installation of ...
-
Teledyne Isco - Model 2110 - Ultrasonic Flow Module
The 2110 Ultrasonic Module provides accurate noncontact liquid level measurement, using built-in software to calculate flow in weirs, flumes and streams. When used in conjunction with Isco’s Flowlink software, that information can be managed and used in a wide variety of ways. With the 2110, an ultrasonic sensor mounted above the flow stream transmits sound waves, which are reflected by the liquid surface. The elapsed time between transmitted and ...
-
Teledyne Isco - Model 2101 - Field Wizard Module
The 2101 Field Wizard module provides users of our 2100 Series open channel flow monitors with a durable instrument to retrieve and transfer stored data. Unlike vulnerable laptop PCs, the Field Wizard is extremely rugged and is built to survive the hazards of field use. The Field Wizard can interrogate a stack containing as many as four of Teledyne Isco’s 2100 Series Flow Modules at once. It can download and store more than 14 days worth of data ...
-
Teledyne Isco - Model 2102 - Wireless Module
The 2102 Wireless Module reduces the need for confined space entry in sewer flow studies by providing remote data retrieval from monitoring instruments. Simply stack the 2102 onto one or more 2100 Series flow modules to form a complete, integrated system for acquiring and communicating open channel flow data. The 2102 uses spread-spectrum digital radio for direct, reliable, two-way communication. You can retrieve data from the safety and comfort of your ...
-
Teledyne Isco - Model 2150EX - Flow Meter for Zone 0 Locations
The 2150EX is an intrinsically safe Area Velocity Flow Meter that is specifically designed and Baseefa-approved for use in Zone 0 and Zone 1 potentially explosive atmospheres under ATEX Directive 94/9/EC. The AV 2150EX smart Area Velocity probe is built on digital electronics, so the analog level is digitized in the sensor itself. The probe is also factory-calibrated for 3 meter span at different temperatures. This superior built-in calibration ...
-
Teledyne Isco - Model 2103 - Modem Module
Flow data retrieval and alarms via land-line phone connection. The 2103 Modem Module eliminates the need for frequent site visits and confined space entry, by automating remote retrieval of data in sewer flow studies. The 2103 uses a land-line modem connection to provide reliable two-way communication between downhole 2100 Series Flow modules and a base computer running Isco Flowlink ...
-
Teledyne Isco - Model 2151 - Intrinsically Safe Area Velocity Flow Meter
The 2151 Flow Meter is the intrinsically safe version (CSA approved for Class I, Div 1 environments) of the 2100 series Area Velocity Flow Meter. To ensure proper application, the 2151 uses a distinctive color, and has connectors that are compatible only with other intrinsically safe 2100 Series components. Highly efficient power management provides battery life up to 8 ...
-
Teledyne Isco - Model 2108 - Analog Output Module
The 2108 Output Module provides three independent current outputs for Isco 2100 Series Area Velocity Flow modules; the 2150, 2151, and 2151P. The 2108 is DIN Rail mounted and uses a 7-26V DC power supply. It provides an easy interface from Isco’s advanced 2100 Series Area Velocity Modules to data collection systems like SCADA/DCS or any other secondary instrument ...
-
Teledyne Isco - Model ADFM - Hot Tap Velocity Profiler
The ADFM Hot Tap Flow Meter provides precise and accurate flow rate measurement in full and pressurized pipe applications where the pipe ID is 18" (460 mm) or greater. The Hot Tap can be used in the difficult hydraulic conditions often found in force mains, siphons, process lines, and other full-pipe ...
-
Teledyne Isco - Model 2151P - Intrinsically Safe, Permanent Flow System
The 2151P Flow System is similar to the 2151 intrinsically safe Area Velocity Flow Meter, but is designed to operate from AC power for long-term or permanent applications rather than from battery power for shorter-term, portable applications. Like all 2100 Series modules, the 2151P is set up via connection to a computer running Flowlink ...
-
Teledyne Isco - Model accQcomm™ - Digital/Analog Interface Module
The accQcomm™ digital/analog interface module accepts RS-232/RS-422 serial data from up to three ISCO ADFM® flow meters (accQpulse™ Hot Tap, or H-ADFM) and converts the data into an industry-standard digital protocol (MODBUS or Ethernet) or industry-standard analog signal (4-20 mA). Either method allows easy interface with SCADA/DCS or other secondary control or data recording systems. The module is wall or console mountable and is powered ...