Fertilizer spreader was designed to be carried by, i.e., connected to the tractor by a Cardan axis with a maximum of 540 r/min, and a three (3) point connection system. The spreader is equipped with a hydraulic opening system, and the fertilizer quantity adjustment must be executed manually by placing the lid lever into desired position for each disc separately.
Topper is intended for use in all agricultural surfaces, for maintenance of green areas and neglected fields. It can be used to mulch harvest waste material as well as branches up to 5 cm thick. The topper is of robust construction and is intended for intensive use. Topper is propelled from the tractor via cardan joint to reducer connection axis, from the transition axis to cogwheel in the reducer casing and through those to flails.
The primary intended purpose of the tractor rotary cultivator is preparation of soil prior to sowing. The shape of the blades is such that they offer minimal soil resistance during operation, resulting in relatively easy operation of the rotary cultivator in the hardest of soils.
Cardan-electric sheller K-3000 is used for husking corn. Allows quick and easy separation of the wheat from the cob. Can it run PTO or electric motor. Sheller has the ability to control the basket, depending on the thickness of corn cobs. Shelling capacity is 3 tonnes per hour. Corn sheller is designed mainly for individual agricultural producers and rural households.
Fertilizer spreader (RG) is intended for spreading dry fertilizer and granulated fertilizer. It is constructed to enable uniform distribution in the entire width, and separately on the left and right sides. A special attachment can be mounted on the spreader, enabling spreading in 4 lines with the regulation of line width. The spreader can also be used for sowing wheat and other crops, as well as salt spreading in winter conditions. The spreader can...
Tipper forks are a tractor implement used for transport of silage bales. The bale is lifted with the fork for transport and a cord is pulled from the tractor cockpit to unload the bale using its own weight. Can be mounted on either front or back end using the tractor hydraulics.
Fertilizer depositing unit is intended for deposition of fertilizer in orchard and vineyard cultivation on depths of up to 25 cm, with the goal of increasing the efficiency of basic fertilizing, thus increasing the quality of yield. Depositing width of the unit can be adjusted within 160 to 400 cm. Height: 1200 mm.
Electric mill used for grinding corn in cob or in grain, as well as all other grains, and is powered by three-phase or single-phase motor. construction Completely closed so they avoided embarrassment in farrowing during work. Also at this mill with possibility to build shellers corn.
Topper mower is intended for moving all kinds of grasses on cultivated surfaces. Possibility of mowing in vineyards and orchards and mulching the residual waste up to 3 cm thick. Possibility of mulching herbal residual waste in the fields. Topper mower expels the grass backwards during mowing.