9 products found
MZT Pumpi Products
-
Centrifugal Pumps
-
Model SCP - End Suction Centrifugal Pump
Single stage, low pressure, centrifugal end suction pump with an axial inlet into the impeller and flanged bearing frame. Simple and compact design, suitable for flexible coupling to electric motor or internal combustion engine as a drive. Fast and easy dismounting without detaching from the existing ...
-
Model D - Horizontal Split Case Double Suction Pump
Horizontal Split Case Double Suction Centrifugal Pumps D are engineered to pump clean water or low viscosity clean liquids at moderate heads more economically than any other type of pump. All fabricated parts are standardized and accurately machined for true alignment, increasing overall durability. Impellers are statically and dynamically balanced and constructed with double inlets, practically eliminating the axial thrust and resulting in high ...
-
Model C, KCP, VC, CS - Multistage Centrifugal Pumps
The C type range is the basic range of our centrifugal ring section multistage pumps. The simplified design, utilizing hydraulically balanced impellers by means of holes into impeller, or by “back to back” impeller execution, provides the optimum pumping solution for medium pressure applications. Pump casing is consisted of suction and discharge housing, middle chambers and bearing brackets. All of the impellers are centrifugal of closed ...
-
Model MS, DMS, MSTD, MSS - Process Duty Multistage High Pressure Pumps
The MS are process duty multistage centrifugal pumps in ring section design, designed (produced) for moderate to high pressure heads available in five basic sizes. The suction and pressure bodies can be rotated for 90 °C in both directions, which enables the pumps to be mounted and adapted to the requirements of the installation. Axial thrust is relieved by means of a drum mounted on the shaft inside the discharge hull, rest of the trust bears one ...
-
Model M, VM - Sewage Pumps
Sewage pump, model M and VM, with open type of impeller, are centrifugal pumps of horizontal and vertical performance. These pumps are intended for pumping impure liquids with firm particles, such as waste waters, feces, sludge water and other ingredients at temperature not exceeding 80°C. These are single-stage with spiral case pumps. The suction joint is axial, connected to the pipe, and the discharge one is radial , turned to the center ...
-
Model DP, VPH, HMF - Deep Well Pumps
This vertical and semi-axial pump converses the capacity range up to 600 (l/s) against head of up to 210 (m), “DP” and “VPH” type are produced as single and multistage pumps while “HMF” type is manufactured only as single stage pump. Centrifugal pump with one or more semi axial impellers. It is applied for installation into the wells. There is a possibility for discharge connection to be under or above of the base ...
-
Rotary Pumps
-
Model HVP, KHVP, VVP, PVVP - Screw – Spindle Pumps
Screw – spindle pumps belong into the group of volumetric pumps. The main working elements of the pump are three screw (helical) spindles (with special profile) and sleeve (casing). Screw spindle pumps can be compared with gear that have big screw length of his teeth or with piston pump which indefinite number of pistons. Pumps are made in horizontal and vertical accomplishment with adequate fitting flanges in horizontal or vertical position. ...
-
Model CEL, CEH, KVP, RVPS - Water Ring Vacuum Pumps
Water ring vacuum pumps CEL (single stage) and CEH (two-stages) are rotary pumps, with star type impeller eccentrically placed in the cylindrical body. The principle of operation is based upon the rotation of the impeller eccentrically placed in the cylindrical body, so that the auxiliary liquid forms 'liquid ...
-
Diesel Pump Units
-
Aggregate - Model DPA, PP-DPA - Diesel Pumps
Diesel pump aggregate DPA is new product on market regarding its simple construction, capability of reaching high pressures, small sizes minimum weight, easy for moving and also easy maintenance. Single stage centrifugal pump is coupled with diesel motor. Coupling is direct to the housing of flywheel or to the engine, and the shaft is coupled to the flywheel through the electric coupling. Those aggregates with good design and small proportions are put ...