Ovlac S.A

10 products found

Products

  • Reversible Ploughs

  • Model 120 Series - Hydraulic Auto Reset Ploughs

    Model 120 Series - Hydraulic Auto Reset Ploughs

    Ovlac ploughs with hydraulic Auto Reset protection are designed to work in any kind of soil. On light soils, it is possible to reduce the break away pressure in order to avoid pulling stones out to the surface. In heavy soils the pressure can be increased to gain penetration capacity and keep the bodies in an optimum working position. The hydraulic protection system from Ovlac has been designed reducing the total number of moving parts. This way, we...

  • Model SF and LF - Shearbolt Ploughs

    Model SF and LF - Shearbolt Ploughs

    SF and LF models feature shearbolt protection system designed to break with a pressure of 3.000kg at the plough point. There are two models available, depending on the working width adjustment. The SF model has hydraulically variable working width between 30 and 50cm per body approximately (depending on the body spacing), whereas in the LB model, the working width can be set manually at four different steps. Depending on the prevailing conditions,...

  • Conventional Ploughs

  • Model SLB - Conventional Semimounted Ploughs

    Model SLB - Conventional Semimounted Ploughs

    The SFB model is a mono-wheel conventional semimounted plough available in 5 to 8 body versions. Thanks to the Non Stop, 100% maintenance free security system, the SFB can adapt to any soil and condition. The working depth as well as the working width of the first body can be hydraulically adjusted from the tractor cabin. Therefore, three controls are needed on the cabin, two D.E and one S.E. The SFB can be fitted with a wide selection of accesories...

  • Model FB - Conventional Mounted Ploughs

    Model FB - Conventional Mounted Ploughs

    Two conventional mounted models round up the Ovlac plough line. The FF model is a simpler an inexpensive option. It fits shear bolt security system, designed to break at a pressure of 3.000 kg, and manual four-step adjustable working width. The FB model is fitted with Ovlac´s leaf spring security system –which is 100% maintenance-free- as well as with hydraulically adjustable working width between 20 and 50cm per body. Ovlac has an broad...

  • Shallow Ploughs

  • Model Mini-R - Shallow Plough

    Model Mini-R - Shallow Plough

    Ovlac´s Mini has been designed to combine the advantages of traditional ploughing and minimum tillage. Traditional ploughing is, without any doubt, the best and more sustainable method for weed control. In biological farming it actually may be the only possibility as chemicals are not allowed. The Mini-R can cope with large volumes of trash at small depths (between 8 and 20 cm). The shallow working depth promotes the development of cavities...

  • Model Mini - Shallow Plough

    Model Mini - Shallow Plough

    Ovlac´s Mini has been designed to combine the advantages of traditional ploughing and minimum tillage. Traditional ploughing is, without any doubt, the best and more sustainable method for weed control. In Biological farming it actually may be the only possibility as chemicals are not allowed. The Mini can cope with large volumes of trash at small depths (between 8 and 20 cm). The shallow working depth promotes the development of cavities where...

  • Cultivators

  • Minichisel - Cultivator

    Minichisel - Cultivator

    Ovlac´s Minichisel is an unique stubble cultivator  available in 2 and 3 row configurations, trailed or mounted, with working widths from 2.5m up to 10m. Its 35×35 mm tines (30×30 also available as option)  allow to work between 3 and 25cm deep in the most demanding conditions. Indeed, the stone protection system based on rubber suspensions patented by Ovlac ( it was typically used just on short disc harrows ) provides a...

  • Versatill - Cultivator

    Versatill - Cultivator

    Ovlac´s Versatill is designed as an all-purpose stubble cultivator. Its 3 rows of high clearance tines –85 cm- featuring leaf spring auto reset protection guarantee an optimal work in all conditions as well as trouble-free handling of high volumes of trash. Thereafter, a row of notched discs chop, mix and level the resulting work. Last but not least, at the rear of the machine, a wide range of rollers is available to ensure a perfect...

  • Short Disc Harrows

  • Maxidisc  - Model II - Short Disc Harrow

    Maxidisc - Model II - Short Disc Harrow

    The Maxidisc II is Ovlac´s latest short disc harrow generation. With a compact and clear design which does not forget consistency at all, the Maxidisc II allows to work in all types of soils as well as on any cultivation regardless of the amount of residue on the surface. Depending on the working requirements, the Maxidisc II can be fitted with 20″ (510mm) or 24″ (610mm) discs for a working depth between 5 and 15cm. Discs are...

  • Eurodisc  - Short Disc Harrow

    Eurodisc - Short Disc Harrow

    Eurodisc is the most robust product in the Ovlac short disc harrow series. It fits  24″ discs (610 mm) with an aggressive angle of attack both in vertical and in the working directions. That is why the Eurodisc has a high penetration capacity and provides an intense mixing and tilling of the stubble at depths of up to 15 cm  In accordance with the product robustness, the Eurodisc features leaf spring stone protection which, on top of...