P.J. Callan Ltd.

24 products found

products

  • Einbock Pneumaticstar - Aftersowing and Underseeding Machine

    Einbock Pneumaticstar - Aftersowing and Underseeding Machine

    Even when you are satisfied with the yeild on your pasture you should maintain and overseed your grassland to keep or further improve it. When you realised during analyzing your pasture that it can be improved by overseeding, then the Pneumaticstar is the ideal machine for you. Holes in the turf reduce productivity and provide space for weeds to germinate. Therefore they need to be filled up with seeds of nutritious grasses. Crops felted with rough...

  • Castelgarden - Model XHX 240 4WD E - Lawn Tractor

    Castelgarden - Model XHX 240 4WD E - Lawn Tractor

    The Castelgarden lawn tractor XHX 240 4WD E combines the increased effectiveness of the 4 wheel drive system, the big 360 litre grass bag with electric dump and the 122 cm cutting deck with twin collecting blades for great cutting performances. XHT 240 4WD is the top of Castelgarden range, and the top of this new category for Castelgarden machines. This model features a 102m cutting deck, strong foot-panels in heavy-duty steel, big 16'...

Products by DAL-BO A/S

  • Rollers

  • Maxiroll - Greenline - Model 1876 - Rollers

    Maxiroll - Greenline - Model 1876 - Rollers

    Maxiroll - Greenline is a modern solution to grassland management with fully hydraulic folding ballast rollers; This development creates a new yardstick in grassland management.The substantial 710mm diameter cylinder rollers are constructed from 10mm heavy duty steel.  The waterproof cylinders rotate on a steel through axle to ensure an optimum press over the land.  The profiled well-ends and close spacing of the roller elements reduce...

  • Greenline  - Model 300 - Grassland Roller

    Greenline - Model 300 - Grassland Roller

    Greenline 300 is a modern solution to grassland management and a good implement for maintaining of existing grassland, sports centre, golf courses, horse pens etc. With Greenline 300 DALBO introduces a pulled grassland roller with great effect, and high weight when the cylinder is filled with water.

  • MaxiRoll - Model 1877 - Hydraulic Folding Rollers

    MaxiRoll - Model 1877 - Hydraulic Folding Rollers

    New generation of hydraulic folding, rollers with horizontal roller sections. All folding and unfolding is carried out whilst the tractor is stationary in the field. The standard hydraulic weight distribution system ensures a 100% even soil pressure over the complete working width. The DUOFLEX-System with accumulator ensures that each roller section works independently ensuring optimal soil contact  along the whole working width. The heavy built...

  • Knife Roller

  • MaxiCut - Model 1892 - Knife Roller

    MaxiCut - Model 1892 - Knife Roller

    A new 3 sectioned knife roller. MaxiCut 600 has a 5.80m working width and can be used on many types of residual plant matters such as sunflower, maize, rape, vegetables, tobacco and cotton. MaxiCut 600 is a simple, yet powerful alternative to a mulcher or topper. It has a high output and will have cost saving advantages due to the relatively low running costs. MaxiCut 600 is an ideal machine to use for first stubble treatment once a crop has been...

  • CultiMax  - Model 1884 - Heavy Duty 7 Row Harrow

    CultiMax - Model 1884 - Heavy Duty 7 Row Harrow

    CultiMax is a heavy duty 7 row harrow, which is perfect for seedbed preparation on ploughed land before maize, potatoes, grain, sugar beet etc. The working depth is controlled by 4 sets of bogie wheels. The wheels ensure precise and stable field operation. Material and soil can easily flow through the machine when cultivating at depths of between 1 and 10cm.

  • Seedbed Preparation

  • SuperMax - Model 2129 - Cultivator

    SuperMax - Model 2129 - Cultivator

    The SuperMax one pass cultivator is designed to eliminate compaction and cultivate via the 2 rows of heavy duty subsoiler legs, level with 2 rows of spring mounted 520 mm diameter discs and consolidate by using either a double 600 mm diameter or a double 800 mm diameter T profiled ring roller.

  • Rollomaximum XL - Model 2198 - Seed Bed Cultivator

    Rollomaximum XL - Model 2198 - Seed Bed Cultivator

    Rollomaximum XL is a precise seed bed cultivator with built-in front and rear rollers developed to meet the growing demands for improved crop establishment. The machine is designed with a combination of rollers and cultivator tines, which coupled to the precise depth adjustment allows the Rollomaximum to prepare, in most situations, a seed bed in a single pass. This means that with Rollo­maximum achieves a...

  • Stubble Implements

  • MaxiDisc - Model 1881 - Disc Implement

    MaxiDisc - Model 1881 - Disc Implement

    MaxiDisc has each disc separately mounted on special hub – this means MaxiDisc is very compact. This implement can keep an exact working depth in 3 cm as well as 10 cm working depth. The big wear-resisting 560x6 mm jagged discs achieves an efficient preparation of the soil as the rear T-Ring Roller keeps the depth stable, pack the soil and leaves the field even. The angle adjustment of the disc is operated hydraulically. This means that one...

  • Bugseret - Model AXR-H Series - Hydraulic Folding Semi-Mounted Tandem Disc Harrow

    Bugseret - Model AXR-H Series - Hydraulic Folding Semi-Mounted Tandem Disc Harrow

    Hydraulic folding semi-mounted tandem disc harrow. The heavy duty lattice frame allows complete depth control incorporating a rear mounted twin section pendulum 600 mm T-ring packer roller. This evenly consolidates the soil encouraging the decomposition of plant residues and sprouting of waste grain and weeds. This new generation of disc harrows offers much more exact working than former generations.

  • Dinco Triplex - Model 1885 - Heavy-Duty 3-Row Stubble Cultivator

    Dinco Triplex - Model 1885 - Heavy-Duty 3-Row Stubble Cultivator

    The newly engineered Triplex 3-row cultivator can be used in a wide range of applications. The exceptional design feature of this harrow is the optimum trash flow provided by the 85 cm frame height and 70 cm row spacing.Working depths between 4 and 30 cm are possible, depending on field conditions and choice of tines.The 300 mm wide wing share tines (standard) ensure full penetration.The Triplex wing share tines can be replaced with 60 mm wide points...

  • Subsoiler

  • Ratoon  - Model 1934 - Subsoiler

    Ratoon - Model 1934 - Subsoiler

    Ratoon subsoiler is based on 2 tine rows (2 to 8 tines), with a row distance of 75 cm and a tine height of 72 cm. Ratoon is equipped with either springbolts or hydraulic stone protection NSH.

  • Presses / Packers

  • Frontflex - Model 1880 - One-Part Front Packer/Roller

    Frontflex - Model 1880 - One-Part Front Packer/Roller

    Very compact one-part front packer/rollerwith a special combi linkage so that it can also be rear mounted. When front mounted the linkage stays flexible in all directions, and for rear mounting it can be locked. Frontflex is available with Crosskill or Cambridge rings.

  • Levelflex  - Model 2008 - Front Mounted Packer

    Levelflex - Model 2008 - Front Mounted Packer

    Pull type front mounted packer fitted with 53 cm Crosskill rings or 80 or 90 cm packer rings, depending on the consistency and composition of the soil. Of highly compact design, it is close mounted to the tractor, keeping the stresses on the tractor and frontlift to a minimum. For crushing clods and evening the surface an optional clod-cracker can be fitted to the front of the implement.

  • Dinco - Model 1887 - Heavy Duty Mounted Stubble Cultivator

    Dinco - Model 1887 - Heavy Duty Mounted Stubble Cultivator

    Heavy duty mounted stubble cultivator with 480 mm wide wing shares providing full working width and even incorporating of the stubble. The following angled discs cut through the soil and even out the surface and the 500 mm rear roller consolidates and levels the soil. It also provides depth control. Possible working depth 4-20 cm. An under frame height of 80 cm allows a huge trash flow.

Products by Rayco Manufacturing, Inc.

  • Mini Work-Force Stump Cutters

  • Model RG13 Series II - Handlebar Stump Cutters

    Model RG13 Series II - Handlebar Stump Cutters

    Mini Work-Force Is the most complete line of handlebar stump cutters available. These rugged machines provide a commercial-grade solution for your stump cutting needs when compact size and affordability are at the top of your priority list. Every unit is built with features like heavy-duty frames, adjustable handlebars, and powder coat paint finish. Quality components throughout, with gasoline engines by Honda and Kohler, and top-of-the-line air...

  • Model RG13 - Handlebar Stump Cutters

    Model RG13 - Handlebar Stump Cutters

    Is the most complete line of handlebar stump cutters available. These rugged machines provide a commercial-grade solution for your stump cutting needs when compact size and affordability are at the top of your priority list. Every unit is built with features like heavy-duty frames, adjustable handlebars, and powder coat paint finish. Quality components throughout, with gasoline engines by Honda and Kohler, and top-of-the-line air filtration systems....

  • Brush Chippers

  • Model RC6D25 & RC6D35 - Brush Chippers

    Model RC6D25 & RC6D35 - Brush Chippers

    The RC6D is a 6-inch capacity, disc-style brush chipper suitable for professional tree and landscape contractors, rental companies, and property managers. This compact brush chipper is designed to be easy to use and easy to maintain, offering years of dependable service. Its powerful feed system pulls in brush and limbs while the Versafeed system regulates feed rate to maximize performance. The right angle disc design minimizes dead space behind the...

  • Model RC1220-70 & RC1220-100  - Brush Chippers

    Model RC1220-70 & RC1220-100 - Brush Chippers

    The RC1220 delivers power and productivity the professional user demands.  This high-performance 12-inch capacity chipper is powered by Kubota diesel engines in 67hp or 99hp*. 

  • Stump Cutter Trailers

  • Model TRSJRW / TRSJRWB - Stump Cutter Trailers

    Model TRSJRW / TRSJRWB - Stump Cutter Trailers

    The RAYCO TRSJRW trailer is specifically designed to haul the self-propelled Super Jr stump cutter and can also be used to transport the RG1635 Trac Jr. The TRSJRW trailer features a single pin lock to secure the stump cutter to the trailer. Standard features include electrostatic powder coat paint, skid resistant deck and ramps, and Dexter Torflex® Axle.

  • Model TR100 - Stump Cutter Trailers

    Model TR100 - Stump Cutter Trailers

    The RAYCO TR100 trailer is specifically designed to haul the RAYCO RG70X (RG70XR), and RG100X (RG100XR) self-propelled stump cutters. The TR100 features a single-pin lock to secure the stump cutter to the trailer. Standard features include: electrostatic powder-coat paint, skid-resistant deck and ramps, electric brakes and tandem Dexter E-Z Lube leaf spring suspension axles. .

  • Forestry Machines

  • Model C100LGP  - Forestry Mulcher

    Model C100LGP - Forestry Mulcher

    When you go into the woods, you need a machine you can count on. You need a loader-style mulching machine that’s purpose built from the ground up to be the most productive and reliable in a mulching application. The C100 is that machine. It’s equipped with a 99.2 hp Kubota engine and Rayco’s exclusive Super Flow closed loop, hydraulic system, providing 39 gal/minute at 5,500 psi to the Predator mulcher head.

  • Model C100R  - Forestry Mulcher

    Model C100R - Forestry Mulcher

    Rayco’s new C100R Forestry Mulcher is the answer if you’re looking for a purpose-built mulcher but need the versatility of rubber tracks. Our customers demanded a mulcher that was capable of crossing roadways and sensitive turf but still had the power and in-woods characteristics of a dedicated forestry machine. The C100R answers that call. It rides on a 17.7-inch wide steel-imbedded rubber track. A reliable, 99hp Kubota diesel engine...