19 products found
products
-
Passive Gas Protection
-
Model PAG 25 - Vent Layer
Made from cuspated High density Polyethylene (HDPE). High strength and crush resistance. Available as fully wrapped or single-sided ...
-
Gas Barrier Membranes
-
PAG - Model Red/Silver - Standard Gas Barrier Membrane
One of the suite of a proprietary aluminium gas barriers, manufactured to exacting European Standards. PAGeotechnical Standard incorporates an aluminium foil for maximum resistance to gas and vapour transmission including a reinforced scrim for strength and tear resistance, it is manufactured using virgin polymer LDPE for flexibility. At greater than 0.4mm PAG Standard meets the minimum standard for proprietary gas barriers as recommended in current ...
-
Spray Applied Membrane
LIQUID BOOT Membrane is a cold, spray-applied membrane that provides an impermeable barrier against gas and vapour intrusion into structures. LIQUID BOOT is sprayed directly to penetrations, footings, grade beams, pile caps, etc., providing a fully-adhered and seamless ...
-
Active Gas Protection
-
Low energy Clean Air Blanket
Designed for low to medium risk sites, LE CAB is often the most cost effective solution for gas protection for industrial or commercial buildings. Utilising the standard damp proofing of the building and offering combined ventilation and barrier, LE CAB has probably the least impact on construction of any gas protection system and therefore offers construction as well as commercial advantage with provable ...
-
Passive Assisted Low Energy CAB
Constant performance irrespective of wind speed. Dilution/dispersion based on air changes. Single geosynthetic barrier component. Provable via probe system. Flexible/upgradeable. Cost effective w.r.t. well designed passive ...
-
Radon (Active) Protection System
PAGeotechnical Ltd and Prestige Air technology Ltd. have developed a state of the art Radon Protection System combining the best current practices in membrane technology, installation and validation including optional extraction offering unheard of flexibility and ...
Products by Monarflex s.r.o
-
Monarflex - Building Membranes - Roofing Underlay
A roofing underlay is placed under the exterior roof and its primary function is to work as a shield that protects the thermal insulation material and the building structure from the effects of the weather. The roofing underlay thus works as a secondary roof underneath the primary roof. Secondly, the roofing underlay must function as the primary weather shield during the construction period. The construction period should naturally be kept as short as possible as the roofing underlay are constructed to work as the secondary roof, not the primary.
-
Monarflex - High Performance Breather Membranes Membrane
The latest version of coated breathable membranes from Monarflex sets new standards in durability utilizing the latest polymer technology to make breathable pitched roofing underlays and wind and rain barriers for walls. The new generation of Monarflex breather membranes continues to use the well-known Monarperm brand name. The Monarperm TP breather membranes ...
-
Monarflex - Non Breathable Membrane
The Monarflex non breathable membranes are generally comprised of a reinforcing grid of either polyester yarn or polypropylene which is protected by two layers of low density polyethylene ...
-
Weather Membranes
Developed in consultation with major contractors, the Monarflex scaffold sheeting, containment netting and temporary roof covering range will help ensure that site work continues in virtually all weather conditions, protecting personnel from rain, snow and wind chill.
-
Monarflex - Membrane Membrane
The market for tarpaulins is full of products with different quality which the Monarflex tarpaulin product range reflects – whatever the need we have the product. The product range therefore consists of tarpaulins with very high quality, a midrange tarpaulins as well as an economical ...
-
Ground Membranes
-
Monarflex - Gas Barriers
Gas is generated in the underground and for the most part it percolates to the surface and dissipates under normal atmospheric conditions. Under these circumstances the gas does not constitute a health hazard. However, when buildings are constructed on gas contaminated land, it will seep into buildings through openings, construction joints, cavities and service penetrations to reach a dangerous concentration with a serious health hazard to the inhabitants ...
-
Monarflex - Geo Membrane
Geo-membranes are usually used in civil engineering where you either want to separate different layers of material or where you want to avoid fluids like water and chemicals to undermine the structure of the civil ...
-
Monarflex - Radon Membrane
Radon is a naturally occurring radioactive gas entering buildings from the underlying ground. Radon is a colourless and odourless radioactive gas generated by the radioactive decay of radium (Ra226) which in turn derives from the radioactive decay of uranium (U238). Uranium is found in minute quantities in all soils and rocks, although the concentration varies from one geographical location to ...
Products by Enviro Cover - a brand by Environmental Products Inc.(EPI)
-
Landfill Cover Products
-
Model DEC - Alternative Daily Enviro Cover
Daily Enviro Cover (DEC) is classified as a nonreusable geosynthetic alternative daily cover in ASTM D 6523-00 (2009), complying with ASTM standards. Enviro Cover meets the US Environmental Protection Agency (EPA) requirement to control disease vectors, fires, odors, blowing litter and scavenging without presenting a threat to human health or the environment. Manufactured with EPI’s proprietary Totally Degradable Plastic Additives (TDPA), Enviro ...
-
Enviro - Model 616 - Landfill Cover Deployer
Enviro Cover Deployer Model 616 is designed for placing Enviro Cover film in small to mid-sized working faces. Model 616 is used on prime movers with bucket ...
-
Model EEC - Extended Duration Enviro Landfill Cover
Extended Enviro Cover (EEC) is an alternative daily cover with extended coverage period. It is is classified as nonreusable geosynthetic alternative daily cover in ASTM D 6523-00 ...
-
Model IEC - Intermediate Duration Enviro Landfill Cover
Intermediate Enviro Cover (IEC) is designed for use on top of an intermediate medium e.g. soil, where the area will not be used for an extended period of time. Intermediate Enviro Cover is designed to provide an effective impermeable and economical barrier. An intermediate cover provides a durable barrier between the environment and the landfill waste for an extended period. The US EPA requires that if compacted earthen material is used as intermediate ...
-
Enviro - Model 800 - Landfill Cover Deployer
Enviro Cover Deployer Model 800 is a self-propelled applicator built on a Morooka rubber track carrier. Model 800 does not require any prime mover to carry it, thus enabling the waste covering process to be conducted ...
-
Enviro - Model 700 - Landfill Cover Deployer
Enviro Cover Deployer Model 700 is a robust applicator designed for placing Enviro Cover film on mid-sized to large working faces. Model 700 is used on prime movers using blade ...
-
Technology
-
Enviro - Polyethylene Landfill Cover Film Technology
Enviro Cover System consists of Enviro Cover film and Enviro Cover Deployer. Enviro Cover film is a uniquely nonreusable polyethylene film developed to meet the requirements for alternative daily covers. Enviro Cover Deployer is specialized patented and patent pending applicator equipment. It is designed to place Enviro Cover film onto the working face to create a continuous impermeable barrier between the waste and the surrounding ...