11 products found

Products

  • Model FX 9 - Bar Hydraulic Carts

    Model FX 9 - Bar Hydraulic Carts

    The FX cart is a SUPER HEAVY DUTY forward folding unit for use with the 9-bar flexible harrow section (Flex 9) The forward folding feature makes it very easy to back the unit up when it is attached to your disc or field cultivator. The FX cart has an easy to use fulcrum system for raising and locking the wing booms into transport position. The FX cart can be modified to handle standard 5-bar flexible harrow sections also.

  • Model FLEX-9 - Heavy Duty Harrow

    Model FLEX-9 - Heavy Duty Harrow

    PEPIN’S 9 bar harrow is ideal for high trash conditions, incorporation of chemicals, or just plain seed bed preparation.This unit is offered 2 ways. If you already have a PEPIN 5 bar FB series harrow, you can order only the last 4 bars if it is 5’0”, 6’0”. 7’0” or 8’0” wide. Or you can order the 9 bar unit complete.The pipe bars are a special 1 5/8” O.D. High Carbon tubing. The teeth are...

  • Model UFX 10 - Bar Hydraulic Carts

    Model UFX 10 - Bar Hydraulic Carts

    DON’T BUY A HARROW UNTIL YOU’VE SEEN. THE UFX (Ultimate Flex) SERIES.The UFX (Ultimate Flex) Series…is a line of 10 bar harrows which is a generation beyond any other type of harrow on the market; 10 bars of fully flexible harrow with fast, complete lever adjustment of the tooth pitch for every 5 bars; each 5 bars of harrow can be adjusted to 6 different pitches depending on the situation; the ultimate in tooth pitch...

  • Model C5 - Three-Bar Coil-Tine Mulchers

    Model C5 - Three-Bar Coil-Tine Mulchers

    Tooth bars – 1 5/8” High Carbon O.D. Tubing.Braces – High Carbon Steel.Lever Assembly – Adjusts tooth angle to fit soil conditions.Teeth – 3/8” O.D. oil tempered, heat treated premier steel.Mulcher sections are interchangeable throughout the entire line for disk harrows and field cultivators.

  • Model WDS-35 - 3 Section Manual Wheel Drawbar

    Model WDS-35 - 3 Section Manual Wheel Drawbar

    Three Section Manual Wheel Drawbar with DS sections in transport position. The transport width is 8 feet, 10 inches, the weight is 518 pounds and the unit is a forward fold type drawbar. It is adaptable to 16’ 0” – 21’ 0” coverage. Designed to match up with field cultivators, disc harrows and other field implements which the harrow will be pulled behind to finish the seed bed. This unit comes equipped with a 13’...

  • Model HD - 3 & 4 Section Hydraulic Harrow

    Model HD - 3 & 4 Section Hydraulic Harrow

    This unit comes with a long pole for hitching to a disc or field cultivator as Standard equipment, and will accommodate nearly any of our sections. The ease, safety and speed of a hydraulic cylinder raises and lowers the harrow sections for truly labor-saving harrowing and weeding. It is the trailer-mounted hydraulic drawbar and transport that raises and lowers sections by merely flipping the hydraulic lever. The cart frame is a heavy-duty...

  • Model CC - Four-Bar Curved Coil-Springtine Tine Harrow

    Model CC - Four-Bar Curved Coil-Springtine Tine Harrow

    This four-bar, Curved Coil Spring Tine Harrow Section is designed to be used as a finishing tool behind field cultivators. It can be mounted to field cultivators with Model “CA-12” arms which will fit the 2 1/2 “, 3”, 4”, 5” or 6” square tube on the rear of the Field Cultivator. Penetration can be applied and adjusted as desired by the springs on the carrier arms.

  • Drawbars - 4 Section Manual Wheel Harrow

    Drawbars - 4 Section Manual Wheel Harrow

    The harrow drawbar is a time-saving unit which may be easily attached behind field cultivators, chisel plows, disk harrows, grain drills and many other implements to let you do two jobs at one time, while reducing soil compaction, time and operating costs.

  • Drawbars - Model HD - Automatic Hydraulic Harrow

    Drawbars - Model HD - Automatic Hydraulic Harrow

    The Semi-Automatic Hydraulic Harrow Drawbar is definitely a labor saving device. To fold up the sections; simply raise them with the hydraulic cylinder, pull your tractor forward and the unit automatically folds up. To return the unit to field position; back up until the wing boom is in line with the center boom, lay down the sections with the hydraulic cylinder and you’re ready to harrow.

  • Drawbars - Model WDS-45  - Manual Wheel Harrow

    Drawbars - Model WDS-45 - Manual Wheel Harrow

    It is adaptable to 16’ 0” – 21’ 0” coverage. Designed to match up with field cultivators, disc harrows and other field implements which the harrow will be pulled behind to finish the seed bed. This unit comes equipped with a 13’ 5” pole for easier turning, especially in tandem operations. Uses 5’ 0” through 7’ 0” sections. (Note: use the longest possible sections in...