Pichon S.A.

17 products found

products

  • Slurry Tankers

  • Model TCI - Integrated Chassis Tanks

    Model TCI - Integrated Chassis Tanks

    PICHON has been manufacturing TCI tanks  (integrated chassis tanks) for more than 45 years. This exclusive product improves the stability of the complete range of PICHON tankers. The tank is not fixed on an independent chassis, but is welded directly onto an integrated chassis, offering the lowest centre of gravity on the market.

  • Single Axle Slurry Tanker

    Single Axle Slurry Tanker

    This range is designed for users who do not require a large tank capacity. This type of equipment is selected according to two main criteria: short distances (0 to 6km) between the filling and spreading points and a moderate volume of effluents to be used.

  • Two Axle Slurry Tanker

    Two Axle Slurry Tanker

    The two-axle range, offering capacities of between 7,150 and 22,700l, is designed for groups of farmers, large farms and service providers. The choice of this type of equipment is determined by two criteria: a large volume of slurry to be transported and a certain distance to be covered between the filling and spreading points.

  • Tri Axles Slurry Tanker

    Tri Axles Slurry Tanker

    The capacity of the tri-axle solutions ranges from 18,500 to 30,000l. These tankers are intended specially for groups of farmers, large farms and contractors. The choice of this type of equipment is determined by two criteria: a large volume of slurry to be transported and a certain distance to be covered between the filling and spreading points.

  • Slurry Mixers - Pump

  • Model B-Mix 45 (4.5m) - Slurry Mixers - Pump

    Model B-Mix 45 (4.5m) - Slurry Mixers - Pump

    The B-Mix 45 is a 4.5m long stirrer. By design, the advantage of the B-Mix 45 macerator lies in the fact that it provides easy access to pits with small 750 x 600 mm manholes.It is equipped with a fully galvanized hinged box section to facilitate its maintenance and to offer a better lifetime. The hydraulic tilt ram and the principle of articulation of the frame make it a perfect tool for the pits with average volumes and...

  • Muck Spreaders

  • Muck Master  - Model M12 - Spreaders

    Muck Master - Model M12 - Spreaders

    The M12 is the latest product launched within the Muck Master range by PICHON. Standard features are for example: commercial axle 150mm section, hydraulic brakes 420x180, large diameter beaters 1035mm with 46 reversible blades and a full galvanized structure.

  • Model M8 / M10 - Manure Spreaders Muck Master

    Model M8 / M10 - Manure Spreaders Muck Master

    The M8 and M10 offer a loading capacity between 8 and 11m3. These 2 models are fully galvanised as the whole range of PICHON Muck Master spreaders and are equipped with 90mm square beam axles and hydraulic brakes 400x80mm.

  • PICHON - Model M12 / M14 - Muck Spreaders

    PICHON - Model M12 / M14 - Muck Spreaders

    The Muck Master M12 and M14, with their fully galvanised body, are equipped with 150mm square beam axles, hydraulic brakes 420x180mm and 2 vertical beaters of 1035mm diameter with 46 reversible blades.

  • Compact Loaders

  • Pichon - Model P260 - Compact Loader for Farm Practices

    Pichon - Model P260 - Compact Loader for Farm Practices

    This 26 hp loader is based on the same chassis as the P330  and can go through 1.10 m-wide ways. The P260 is designed for users who are looking for greater stability and a high lifting capacity. The oversized articulation offers a wide steering angle, while preserving sufficient oscillation. This loader can lift in line position 890kg up to 2.85m height.

Products by Frans Vervaet B.V.

  • Model Q-616 - Sugar Beet Harvester

    Model Q-616 - Sugar Beet Harvester

    The name Q-series  is mainly choosen  for 'Quad'. It's a 4 wheeler. But because the rear wheels are mounted close together, it has the same advantage as a trike, namely: the wheels each run in their own track. Or at least that choice is there. Because there are still people who do not want this per se. Q also reflects Quality, as we like to mention in our company motto: 'Experiencing Quality'.  The machine can perform under all...

  • Beet Eater - Model 625 - Sugar Beet Harvester

    Beet Eater - Model 625 - Sugar Beet Harvester

    Producing quality is the Nr. 1 priority  of Frans Vervaet B.V. You can tell when you have a close look  at the Vervaet 625 sugar beet harvesters. These machines are the result of over 30 years experience and a huge investment in research and development. We develop and produce machines that bring up your harvest experience  to the highest  level. Started  in 1974 in Biervliet, Netherlands, The Vervaet family developped the...

  • Beet Eater - Model 925 - Sugar Beet Harvester

    Beet Eater - Model 925 - Sugar Beet Harvester

    As early as 1974,Vervaet introduced the world's first self propelled tanker harvester. A machine which was capable of topping, lifting, cleaning and transporting the beet simultaneously. In the 30 years since, almost all competitors have followed in our footsteps.

  • Hydro Trike

    Hydro Trike

    Vervaet developed the hydro trike together with and with the demand from contractors, who were experienced in handling slurry. The concept was right from day one ,and the machines conquered the market in a few years time. Now , more then 20 years later, the Hydro Trike is still the favorite machine of the contractors that own them, the drivers that operate them, and the farmers who have the machine on their fields. We proudly present: The Vervaet...

  • Model XL - Hydro Trike

    Model XL - Hydro Trike

    Extra extendable axle: more power, more output. Because of the on-going increase of scale and therefor the desire for more capacity, we developed the Hydro Trike XL. The tank of this version has a capacity of 20,5 m³, which is also ideal to empty a 36 m³ truck in 2 times. The otherwise optional Borger 1550 (9m³) pump is standard on the XL Trike. Of course only 3 wheels was no longer feasible The solution was quickly found with an...

  • Universal Spreader

    Universal Spreader

    In recent years Vervaet and the French Panien have joined together in a productive partnership that capitalises on both companies' strengths. Vervaet has 25 years' experience with an advanced self-propelled machine, and Panien is a well-known French manufacturer of spreaders and other equipment. For some time the companies have worked to merge these two premium-quality products into a single formula. The result: the Vervaet Hydro Trike Universal...