8 products found
PTronik Pty Limited Products
-
Process Controllers - On Demand Cleaning
-
PTronik - Model ECO-o - On Demand Cleaning Process Controllers
Where most baghouse dust collectors rely on continuous pulse cleaning processes to maintain plant efficiency the ECO provides inbuilt capabilities to accurately measure the performance of a dust collection installation, and based on those measurements, manage the number of pulse cleaning cycles required to optimize baghouse productivity. The ECO can be retro-fitted to an existing dust collector in less than one hour, or supplied as an OEM component within ...
-
PTronik - Model ECO-t - On Demand & Tube Cleaner Control
The range of user definable alarms built into the ECO Controller mean that process monitoring to pre set performance conditions significantly reduces or eliminates the risk of contaminants escaping into the environment. In addition, the electrical energy savings accruing from the efficiency improvements deliver equivalent reductions in CO2 emissions of 30 to 50% ECO On Demand Controllers are designed and manufactured in Australia and meet or exceed the ...
-
PTronik - Model pMC - pMC Master Control
The pMC Master Controller is a comprehensive system that controls the total function of a dust collector. This advanced system monitors all the functions of a dust collector and has a comprehensive numbers of built-in selectable alarms. These alarms can be general or critical alarms. The master control system includes 10 solenoid outputs that can be expanded to 250 in lots of 10 with the Extender pack. Filter State Tracking by continuously tracking and ...
-
Timers - 24VDC
-
E10 - Model DC - E10 DC 10 output timer
The E10 is a new generation timer is designed with smart maintenance functions. The 10 output timer is controlled with a intuitive three button digital menu. Up to 250 outputs can be achieved with Extension cards. Available as a stand-alone timer, or with an enclosure to suit the surrounding environmental re-quirements. The E10 is a solid state sequencer de-signed to provide an adjustable pulse to operate pilot valves in Reverse Jet pulse Dust ...
-
PTronik - Model E6 timer - Smart 6 output timer
SMART sequential digital timer with 6 outputs: Counters - hours & pulses with alarm Solenoid valve fault protection with alarm matrix display ModBus connectivity Maintenance mode Code protection One input for any sensor Remote Differential Pressure - On demand Broken bag detection with matrix display Header pressure with valve mechanical fault alarm 16 outputs with Extension ...
-
Specialist Systems
-
Abrasive Blasting Control System
For: Dust Collector With 45kw Fan. Air Conveyor 15kw. Rotary Locks 0.37kw. Sweeper 1.5kw. Blast Guns & Lights. Room Lights 4kw. Vibrator. Roller Doors ...
-
Spray Booth Controller
Operation: The controller is designed to operate one FAN (star delta configuration) for load of 15KW. A TIMER SBS1102 controls the pre and the post purge times. The timer operates as soon as the FAN is started. The Fan motor is protected by an electronic thermal overload with adjustable settings (24-40A). A door interlock is provide through and intrinsically safe barrier. Pre-purge time: the air valve will energise 1 minute after the fan starts operation ...
-
Fan/Shaker Dust Collector 2-20KW
Example of 5.5KW Fan/shaker. Operation: The controller is designed to operate a FAN (star delta configuration) for load of 5.5 KW and fit-ted with a thermal overload (TOL). The FAN TOL range is: 6 - 10A The SHAKER TOL range is: 0.65 – 1.1 A When the FAN is stopped the SHAKER will start operating after a preset time delay (1 to 60s) and will stay in operation for up to 60mins. An additional Shut Down timer (TD) will shut down the all system after a preset ...