Ramsay & Jackson Ltd.

21 products found

Products by Case IH - a division of CNH Global

  • Tractors - Farmall Series

  • Farmall - Model C Series - Utility Tractors

    Farmall - Model C Series - Utility Tractors

    6 Models, 64-117 (PTO: 50-99) Engine Horsepower: The utility Farmall C series is a deluxe line of tractors, combining power and performance with a superior operator environment.

  • Farmall - Model V Series - Tractors

    Farmall - Model V Series - Tractors

    1 Model, 106 (PTO: 92) Engine Horsepower: The Farmall V tractors are specialty tractors designed to fit perfectly between vineyard rows, with a low center of gravity for steep inclines.

  • Farmall - Model N Series - Tractors

    Farmall - Model N Series - Tractors

    3 Models, 76-106 (PTO: 62-92) Engine Horsepower: The Farmall N Series tractors are specially designed for vineyards, orchards or any other applications where space is at a premium. Horsepower Range: 76-106

  • Tractors

  • Farmall - Model 55A - Robust Practical Tractor

    Farmall - Model 55A - Robust Practical Tractor

    The open station Farmall 55A has been created to provide a robust practical tractor that is easy to drive for the small acreage farms or rural estates and has the ability to be used on a daily basis as the support machine for larger operations. The powerful rear PTO makes grass moving, tedding, or pasture topping a breeze. On larger livestock units, the tight turning 2 wheel drive and easy direction changes of the left hand shuttle make light work of...

  • Harvesting

  • Case IH  - Model 4400 Series - Corn Heads

    Case IH - Model 4400 Series - Corn Heads

    Case IH 4400 series corn headers offer excellent picking ability in both standing and down corn, increasing grain savings in all circumstance. What’s more, they offer unrivalled ease of servicing to ensure they are ready for work in no time at all, and perform in all harvesting conditions. The dividers are key to pick up layed crop or seperate tangled corn plants. They have a considerable influence on the result of the harvest. The narrow,...

  • Balers

  • Case IH - Model RB Series - Round Balers Variable Chamber

    Case IH - Model RB Series - Round Balers Variable Chamber

    Bale diameter from 90 to 150 or 180 cm .At Case IH we listen to our customers, because we want to keep them productive especially during harvesting. That’s why the two variable chamber round balers have new features that boost productivity and extend baler life.

  • Tillage

  • Case IH - Offset Disk Harrows

    Case IH - Offset Disk Harrows

    Case IH Heavy-Offset 790 offset disk harrows perform a wide array of soil-conditioning tasks with tough, long-lasting components. Two models are available, providing a range of disk blade width and spacing options.

  • True-Tandem - Disk Harrows

  • True-Tandem - Disk Harrows

    True-Tandem - Disk Harrows

    Working widths from 22 - 47 feet: Tough field conditions call for tough tillage tools. Case IH True-Tandem™ Disk Harrows lead the industry in ruggedness and reliability so you can manage heavy crop residue with ease.

  • True-Tandem - Model 345 - Disk Harrow

    True-Tandem - Model 345 - Disk Harrow

    Case IH True-Tandem 345 disk harrows, with working widths of 22 to 47 feet, provide straight, easy pulling for primary tillage, seedbed preparation or chemical incorporation.

  • True-Tandem - Model 375 - Disk Harrow

    True-Tandem - Model 375 - Disk Harrow

    Case IH True-Tandem 375 disk harrows, with working widths of 22 to 47 feet, deliver maximum pass coverage, durability and low maintenance with agronomically sound design features.

  • True-Tandem - Model 340 - Disk Harrow

    True-Tandem - Model 340 - Disk Harrow

    The True-Tandem 340 is available in working widths ranging from 18 ft. 8 in. to 34 ft. 1 in. (5.7 to 10.4 m), and it can be used in the Spring or Fall for seed bed and crop residue management.

  • True-Tandem - Model 370 - Disk Harrow

    True-Tandem - Model 370 - Disk Harrow

    True-Tandem 370 all-purpose tandem disk. Built on a frame that is even more rugged than that of the 340 – and loaded with many of the same productivity-boosting features – the True-Tandem 370 is specially equipped for dryland and heavy residue management applications. Even the toughest soil and residue conditions are no match for this monster.

Products by Twose of Tiverton Limited

  • Hedge & Verge Cutters

  • Twose - Model TA Range - Hedge & Verge Cutters

    Twose - Model TA Range - Hedge & Verge Cutters

    TA320 - 3.2m (10ft, 6in). TA420 - 4.2m (13ft 9in). 1.0m cut flailhead (direct drive). Left hand or right hand build options. Low power requirement. 3-point linkage mounted (CAT I) & CAT II). Excellent arm geometry. Rotor reverse. Hydraulic safety breakaway. High performance hydraulic system. Storage support legs. Choice of attachments. Oil included. Minimum tractor requirements TA320: 30hp, 1300kg. Minimum tractor requirements TA420: 45hp,...

  • Twose - Model TE Range - Hedge & Verge Cutters

    Twose - Model TE Range - Hedge & Verge Cutters

    4.8m (15ft 4in). 1.2m cut DS flailhead (belt drive). Totally independent hydraulics. 3-point linkage mounted (CAT II). Machine weight 970kg. Cast iron pumps and 45hp motor. Power slew and hydraulic breakaway. 240° head rotation. 140 litre capacity. Mechanical safety breakback. Cable controls. Head float. Dual direction flail rotation. Cab safety guard kit. Chain stabiliser kit. Oil included. Minimum tractor requirements TE480: 60hp, 2250kg

  • Rotary & Flail Toppers

  • Twose - Model RT Range - Rotary & Flail Toppers

    Twose - Model RT Range - Rotary & Flail Toppers

    Cutting widths 1.8m/2.4m/2.75m. 2.4m Offset model available. Three-point linkage-mounting. Cutting height from 30mm to 150mm, 540rpm PTO. Shaft driven gearboxes. Shear bolt protection. Two cutting blades per rotor 50mm blade overlap. Full length skids. Free Swinging Blades

  • Twose - Model RT 215 and RT 275 - Rotary & Flail Toppers

    Twose - Model RT 215 and RT 275 - Rotary & Flail Toppers

    RT-215 Semi-offset: Cutting width 2.13m (7ft). RT-275 Inline model: Cutting width 2.73m (9ft). Three-point linkage-mounting. Cutting height from 24mm to 114mm  540rpm PTO. Belt Drive. Heavy duty gearbox. Two cutting blades per rotor. Swinging, overlapping blades. Shear bolt protection. Full length skids. RT-275 fitted with end linkage as standard for ease of transport

  • Mowers/Tedders/Rakes

  • Twose Opticut - Disc Mowers

    Twose Opticut - Disc Mowers

    2.5m and 2.9m cutting widths. Three- point linkage- mounting. Quick and easy blade replacement. Heavy duty construction. Mechanical breakback. Four V-belt driven. Disc protection. Deck movement of -30° to +40°. Spring assisted weight distribution. Hydraulic folding 540 PTO over- run protection

  • Twose Silvercut - Model 270, 300, 340 and 380 - Disc Mowers

    Twose Silvercut - Model 270, 300, 340 and 380 - Disc Mowers

    2.5m, 2.9m, 3.25m and 3.7m cutting widths. Three- point linkage- mounting. Quick and easy blade replacement. Disc protection. Curved forged skids. Paired, rotating disc’s. Safety breakback. Heavy duty construction. Hydraulic folding. 1000 PTO slip clutch and over-run protection

  • General Implements

  • Twose - Model F 3040 - Spring Harrow Rakes

    Twose - Model F 3040 - Spring Harrow Rakes

    Heavy duty frame with box section bars. Adjustable working height. Adjustable tine angle. Parking stand. Improved aeration and drainage. Reduces the need for spray chemical and fertilizer. Tine coil behind bar to protect field crops from pinching

  • Haymakers

  • Twose - Model RV-300 - Combi Rake

    Twose - Model RV-300 - Combi Rake

    3.0 and 3.9m working widths. Three-point linkage mounting. Simple height adjustment. Can be used for raking or tedding. Robust build quality. Delivers a wide and even spread and a large fluffy swath. Hardened crown-wheels, pinions and drivelines between the rotors for long-lasting durability

  • Forestry

  • Model TW250 PHR 3PT - Mounted Pro Leveler

    Model TW250 PHR 3PT - Mounted Pro Leveler

    2.5m working width. Three point linkage (Cat I and II). Hydraulic horizontal adjustment. Hydraulic beam adjustment. Serrated blade edge. Blade side stops. Ideal for gravel, snow and ice