RECO Ltd

23 products found

products

  • STRAUTMANN - Mixer Wagons

    STRAUTMANN - Mixer Wagons

    Sub Type: vertical mixer, Range: Vertimix K Twin, Disc/Rotors/Augers/Knives: twin auger Capacity 13m- 15m.

  • FELLA - Disc Mower

    FELLA - Disc Mower

    Mounting Details: Rear / front / semi-mounted / combination / trailed, Range: SM - compact angular gear, Working Width 207cm - 827cm.

Products by FELLA-Werke GmbH - part of AGCO Corporation

  • Drum Mowers

  • Model KM 230 FP - KM 270 FP - Front Mounted Mowers

    Model KM 230 FP - KM 270 FP - Front Mounted Mowers

    Front-mounted mowers with oscillating linkage are ideal for combining with rear-mounted mowers or loader wagons. The oscillating linkage hitch attachment in the series allows free room for a lateral pivoting travel of up to +/- 6,5°. Work is made additionally easier by the quick-change blade system (featured as standard).

  • Model KM 310 TL - Rear Mounted Mower

    Model KM 310 TL - Rear Mounted Mower

    The KM 310 TL is a premium class rear-mounted mower which has a middle attachment at the centre of gravity. The mower is lifted and lowered again on the headland using a single-acting control unit. A special hydraulic compensating cylinder prevents the mower unit from automatically swinging when it is lifted. Your sward and the cutter bar are therefore protected.

  • Disc Mowers

  • Alpine - Model SM210FK,SM 260 FK, SM 260 FP, SM 260 FP-S  - Disc Mowers

    Alpine - Model SM210FK,SM 260 FK, SM 260 FP, SM 260 FP-S - Disc Mowers

    To also meet the demands of farmers in alpine regions, FELLA has developed the disc mowers in the SM 200 series. These are exceptional in their short, compact linkage. As a result, the centre of gravity lies close to the tractor and this leads to very good tracking stability on sloping terrain. Due to the centre swinging hitch (+/- 4°) of the mower, optimum ground adaptation is ensured.

  • Model SM 310 FP - Round Front Mounted Mower

    Model SM 310 FP - Round Front Mounted Mower

    Due to the compact linkage on the FP mower, the centre of gravity lies very close to the tractor. This results in a low load for the tractor and machine, and reliably prevents rocking, even when driving quickly on roads. The attachment and removal of the machine using a mounting triangle, which is extremely easy and quick to complete, is another advantage of this model. Additional hydraulic connections are not required.

  • Model SM 310 FP, 310 FP-K,310 FP-SL,310 FP-KC, 310 FP-RC - Front Attachment Disc Mowers

    Model SM 310 FP, 310 FP-K,310 FP-SL,310 FP-KC, 310 FP-RC - Front Attachment Disc Mowers

    Due to the compact linkage on the FP mower, the centre of gravity lies very close to the tractor. This results in a low load for the tractor and machine, and reliably prevents rocking, even when driving quickly on roads. The attachment and removal of the machine using a mounting triangle, which is extremely easy and quick to complete, is another advantage of this model. Additional hydraulic connections are not required.

  • Conditioner

  • Alpine - Model KC 275 D - Conditioner

    Alpine - Model KC 275 D - Conditioner

    With the combined use of a front-mounted mower and a rear conditioner KC 275 D, you can achieve an unprecedented level of efficiency for the forage harvest in alpine areas. The optimum weight distribution leads to an excellent tracking stability, even on difficult sections. The forage is optimally prepared and loosely deposited by the conditioner – an important requirement for perfect quality forage.

  • Tedders

  • Alpine - Model TH 401 DS, TH 401 DN, TH 431 DN, TH 601 DN - Tedder

    Alpine - Model TH 401 DS, TH 401 DN, TH 431 DN, TH 601 DN - Tedder

    FELLA has specially developed three very light yet robust hay tedders for alpine terrain. Maximum safety is still ensured even on extreme slopes thanks to the low centre of gravity and the compact transport position. As with all FELLA hay tedders, the forage is picked up by the tines and turned gently without suffering damage. A light, loose and well-mixed layer of forage is created, all of top quality. The edge spreading device which is fitted as...

  • Rakes

  • Alpine - Model TS 301 DS and TS 351 DS - Single Rotor Rakes

    Alpine - Model TS 301 DS and TS 351 DS - Single Rotor Rakes

    Whether front or rear mounted, with the single-rotor rakes TS 301 DS and TS 351 DS, FELLA offers two all-round performers with rigid headrack for alpine terrain. Due to its low weight and short and compact attachment, these FELLA rakes can be used with a tractor performance level of as low as approx. 20 hp. Ideal for mountainous regions which demand powerful machines, while at the same time carefully handling the sensitive underground structure. The...

  • Model TS 301 DN, TS 351 DN, TS 391 DN - Single Rotor Rakes

    Model TS 301 DN, TS 351 DN, TS 391 DN - Single Rotor Rakes

    The single-rotor rakes with trailing device from the 300 series are outstanding due to their low weight, their sturdy design, their ease of handling and their versatile use. These rakes can therefore be used with a tractor performance level of as low as approx. 23 hp. Perfect for use in different regions. Thanks to its 8 or 10 tine arms and 3 or 4 tines, each arm guarantees perfect and neat raking performance at all times. Only the best for your...

  • Model TS 1302 and TS 1502 - Two-Rotor Side Rakes

    Model TS 1302 and TS 1502 - Two-Rotor Side Rakes

    The models TS 1302 and TS 1502 are very agile and versitile machines. Depositing a single swath is just as easy as depositing two small single swaths or a double swath by making a return pass. The working width can be infinitely adjusted hydraulically and held fixed in any position. Using these machines, tidy and precise swaths can be formed even on demanding terrain. Due to their comparatively low weight, small tractors can also be used, which...

Products by Ovlac S.A

  • Reversible Ploughs

  • Model 120 Series - Hydraulic Auto Reset Ploughs

    Model 120 Series - Hydraulic Auto Reset Ploughs

    Ovlac ploughs with hydraulic Auto Reset protection are designed to work in any kind of soil. On light soils, it is possible to reduce the break away pressure in order to avoid pulling stones out to the surface. In heavy soils the pressure can be increased to gain penetration capacity and keep the bodies in an optimum working position. The hydraulic protection system from Ovlac has been designed reducing the total number of moving parts. This way, we...

  • Model SF and LF - Shearbolt Ploughs

    Model SF and LF - Shearbolt Ploughs

    SF and LF models feature shearbolt protection system designed to break with a pressure of 3.000kg at the plough point. There are two models available, depending on the working width adjustment. The SF model has hydraulically variable working width between 30 and 50cm per body approximately (depending on the body spacing), whereas in the LB model, the working width can be set manually at four different steps. Depending on the prevailing conditions,...

  • Conventional Ploughs

  • Model SLB - Conventional Semimounted Ploughs

    Model SLB - Conventional Semimounted Ploughs

    The SFB model is a mono-wheel conventional semimounted plough available in 5 to 8 body versions. Thanks to the Non Stop, 100% maintenance free security system, the SFB can adapt to any soil and condition. The working depth as well as the working width of the first body can be hydraulically adjusted from the tractor cabin. Therefore, three controls are needed on the cabin, two D.E and one S.E. The SFB can be fitted with a wide selection of accesories...

  • Model FB - Conventional Mounted Ploughs

    Model FB - Conventional Mounted Ploughs

    Two conventional mounted models round up the Ovlac plough line. The FF model is a simpler an inexpensive option. It fits shear bolt security system, designed to break at a pressure of 3.000 kg, and manual four-step adjustable working width. The FB model is fitted with Ovlac´s leaf spring security system –which is 100% maintenance-free- as well as with hydraulically adjustable working width between 20 and 50cm per body. Ovlac has an broad...

  • Shallow Ploughs

  • Model Mini-R - Shallow Plough

    Model Mini-R - Shallow Plough

    Ovlac´s Mini has been designed to combine the advantages of traditional ploughing and minimum tillage. Traditional ploughing is, without any doubt, the best and more sustainable method for weed control. In biological farming it actually may be the only possibility as chemicals are not allowed. The Mini-R can cope with large volumes of trash at small depths (between 8 and 20 cm). The shallow working depth promotes the development of cavities...

  • Model Mini - Shallow Plough

    Model Mini - Shallow Plough

    Ovlac´s Mini has been designed to combine the advantages of traditional ploughing and minimum tillage. Traditional ploughing is, without any doubt, the best and more sustainable method for weed control. In Biological farming it actually may be the only possibility as chemicals are not allowed. The Mini can cope with large volumes of trash at small depths (between 8 and 20 cm). The shallow working depth promotes the development of cavities where...

  • Cultivators

  • Minichisel - Cultivator

    Minichisel - Cultivator

    Ovlac´s Minichisel is an unique stubble cultivator  available in 2 and 3 row configurations, trailed or mounted, with working widths from 2.5m up to 10m. Its 35×35 mm tines (30×30 also available as option)  allow to work between 3 and 25cm deep in the most demanding conditions. Indeed, the stone protection system based on rubber suspensions patented by Ovlac ( it was typically used just on short disc harrows ) provides a...

  • Versatill - Cultivator

    Versatill - Cultivator

    Ovlac´s Versatill is designed as an all-purpose stubble cultivator. Its 3 rows of high clearance tines –85 cm- featuring leaf spring auto reset protection guarantee an optimal work in all conditions as well as trouble-free handling of high volumes of trash. Thereafter, a row of notched discs chop, mix and level the resulting work. Last but not least, at the rear of the machine, a wide range of rollers is available to ensure a perfect...

  • Short Disc Harrows

  • Maxidisc  - Model II - Short Disc Harrow

    Maxidisc - Model II - Short Disc Harrow

    The Maxidisc II is Ovlac´s latest short disc harrow generation. With a compact and clear design which does not forget consistency at all, the Maxidisc II allows to work in all types of soils as well as on any cultivation regardless of the amount of residue on the surface. Depending on the working requirements, the Maxidisc II can be fitted with 20″ (510mm) or 24″ (610mm) discs for a working depth between 5 and 15cm. Discs are...

  • Eurodisc  - Short Disc Harrow

    Eurodisc - Short Disc Harrow

    Eurodisc is the most robust product in the Ovlac short disc harrow series. It fits  24″ discs (610 mm) with an aggressive angle of attack both in vertical and in the working directions. That is why the Eurodisc has a high penetration capacity and provides an intense mixing and tilling of the stubble at depths of up to 15 cm  In accordance with the product robustness, the Eurodisc features leaf spring stone protection which, on top of...