5 products found
Resol GmbH Products
-
Solar and Heating Controllers
Solar thermal systems are operated and controlled by solar controllers. RESOL differential temperature controllers are used in solar, heating and air-conditioning systems to initiate switching processes depending on thermal, hydraulic and environmental conditions. Apart from these basic functions, RESOL controllers offer a variety of options and functions for the optimum use of individual solar and heating systems.
-
RESOL - Model HC - Heating Controller
The heating controller can control a weather-compensated heating circuit, the DHW loading and the backup heating demand for both. With up to five extension modules, further heating circuits, additional DHW functions such as circulation or thermal disinfection, and the efficient implementation of further heat sources can be controlled. Due to the flexible application and extension possibilities, the heating controller is also ideal for larger objects such ...
-
Datalogger & VBus -Accessories
Data communication between different components takes place via the RESOL VBus. The controllers are therefore able to communicate with additional modules, allowing the system to be analysed and adapted to the individual consumer and system.
-
RESOL - Model AM1 - Alarm Module
The Alarm module AM1 is designed to signal system failures. It is to be connected to the VBus® of the controller and issues an optical signal via the red LED if a failure has occurred. The AM1 also has a potential-free relay output, which can e. g. be connected to a building management system (BMS). Thus, a collective error message can be issued in the case of a system failure. Depending on the controller and the sensors connected, different fault ...
-
Pump Stations & Accessories
Pump stations offer solutions for the efficient use of a system through harmonised components. They contain all units necessary for the operation of a solar system. Installation and initial operation of the stations are easy, because the components are already pre-assembled and ready to plug in.
-
RESOL - Wall Mounting for Diaphragm-type Expansion Vessel
Wall mounting for diaphragm-type expansion vessel with screws and wall plugs, high grade steel corrugated tube and connection thread ¾' Including quick release valve coupling enabling removal of expansion without draining down of the ...
-
Valves
Valves are used to control fluid flow. In hydraulic systems, different valves are used in order to run parts of the system separately or to switch on or off particular parts as required. 2-port valves allow or stop flow rates. Changeover valves are used to distribute and redirect flow rates. In order to avoid noise pollution and system damage, there is no back stroke.
-
RESOL - Model MA10/25 - Domestic Water Mixer Valve
One-hand domestic water mixer valve for installation into hot water circuits as scald ...
-
RESOL - Model VA22 - 2-port Motor-driven Ball Valve
The 2-port motor-driven ball valve RESOL VA22 is produced according to international standards and offers universal application possibilities in heating, warm water, solar and irrigation systems. A large number of application possibilities in the field of energy distribution is provided to the ...