38 products found
Senix Corporation Products
-
ToughSonic - General Purpose Ultrasonic Sensor
For general distance ranging and benign liquid level applications, including irrigation, flood monitoring, dimensioning, object detection or selection, roll diameter and general industrial automation. These rugged, compact ultrasonic sensors inspired the “ToughSonic” name. They are our flagship products with heavy-duty electronics epoxy potted into type 316 stainless steel housings, with permanently attached cables and ruggedized piezoelectric transducers. ToughSonic sensors are found on remote monitoring stations from the Australian outback to Alaskan oil fields. They are installed on heavy construction and farm equipment and in some of the harshest factory environments. When an ordinary sensor just won’t do, you need a ToughSonic.
-
ToughSonic - Model 3 - Ultrasonic Distance Sensors
Features: Short range - small housings. Short deadband at 1.75 in (44 mm). Very narrow beam at close range. Indoor or outdoor uses. Straight or tapered thread options. Two outputs plus serial data. Serial data-only models. Temperature compensation options. Push-button or PC ...
-
ToughSonic - Model 14 - Ultrasonic Sensor
Features: Long range - small housing. Rugged construction, IP68 rated. Indoor or outdoor uses. Straight or tapered thread options. Two outputs plus serial data. Serial data-only models. Temperature compensation options. Push-button or PC ...
-
ToughSonic - Model 30 - Ultrasonic Sensors
Features: Long range - small housing. Rugged construction, IP68 rated. Indoor or outdoor uses. Front and rear mounting threads. Five outputs plus serial data. Serial data-only models. Temperature compensation. Push-button or PC ...
-
ToughSonic - Model 50 - Ultrasonic Sensor
Features: Long range - small housing. Rugged construction, IP68 rated. Indoor or outdoor uses. Three mounting options. Five outputs plus serial data. Serial data-only models. Temperature compensation. User configured with ...
-
Senix - Pushbutton Sensors Setup
The Senix “Teach” feature allows you to configure an ultrasonic sensor, in situ, using a push button and the Target Status Indicator LED located on the back of the sensor. All ultrasonic sensor configurations are stored in non-volatile memory and retained when powered off. The Teach feature is available all standard ToughSonic 3,
-
ToughSonic Chem - Chemical Level Ultrasonic Sensor
In chemical tanks this means resistance to deterioration from chemical exposure. These rugged, compact ultrasonic level sensors measure a wide variety of liquids from diesel fuel in rail locomotives to chemical tanks in the paper and food processing industries (not suited for high temperature CIP operations). Heavy duty electronics are epoxy potted into a polyvinylidene fluoride (PVDF) housing that physically isolates the transducer and electronics from the chemicals and can withstand exposure to both acids and bases. They are used both indoors and out, and in some of the harshest factory environments. They of course also are used in liquid level applications where chemical resistance is not required.
-
ToughSonic - Model CHEM 14 - Ultrasonic Level Sensor
ToughSonic CHEM 14 Level Sensor Features: Non-contact level measurement. Rugged, compact chemically resistant PVDF housing. Short nose and deadband measures closer to full tank. Integral cable strain relief. IP68 rated (submersible). Indoor or outdoor application. Top and bottom mounting threads. Five outputs plus serial data. Temperature compensation. PC ...
-
ToughSonic - Model CHEM 20 - Chemically Resistant Ultrasonic Level Sensor
ToughSonic CHEM 20 Level Sensor Features: Non-contact level measurement. Rugged construction, IP68 rated. Indoor or outdoor uses. Top and bottom mounting threads. Five outputs plus serial data. Serial data-only models. Temperature compensation. PC ...
-
ToughSonic - Model CHEM 35 - Chemically Resistant Ultrasonic Level Sensors
ToughSonic CHEM 35 Level Sensor Features: Non-contact level measurement. Rugged construction, IP68 rated. Indoor or outdoor uses. Top and bottom mounting threads. Five outputs plus serial data. Serial data-only models. Temperature compensation. PC ...
-
Connectivity
-
Senix ToughSonic - Ultrasonic Sensor Electrical Interfaces
Senix sensor models feature multiple simultaneous outputs. Senix sensors communicate utilizing Modbus protocol. Alternatively, ASCII streaming output for simple connections to equipment such as display systems or other devices is also available via SenixVIEW. The communication baud rate is adjustable via SenixVIEW from 9,600 (default) to 115,200 baud to accommodate user ...
-
Senix - Multi-Sensor Wired Connections
Multi-Sensor Wired Connections: Networks and Synchronization. Senix ultrasonic sensors can be connected in multi-sensor data networks to retrieve measurements and/or adjust sensors using SenixVIEW software. An entire collection of data-networked sensors can be managed, stored and ...
-
AirWire - Model LoRa - Wireless Level Monitoring Technology
Need to know how much diesel fuel is in the tank, how high the water level is under the bridge, or whether the chicken feed will last longer than the chickens? Senix ToughSonic Level Sensors can now get these answers to your desk or mobile device quickly, safely and inexpensively using the emerging LoRa spread-spectrum wireless ...
-
ToughSonic Accessories
-
ToughSonic - Setup Kits
Everything needed to connect, power and configure ToughSonic ultrasonic ...
-
ToughSonic - Model UA-TS-TB - Universal Wiring Termination Board
Universal Wiring Termination Board for ToughSonic ultrasonic sensors. Simplifies sensor installation. Consolidates all power and interface wiring. Color-coded sensor wire terminals. Power input jack for UA-PS-750 power supply. RJ-11 jack for direct connection to all Senix serial data interfaces and setup kits. Includes DIN rail mounting clips. Can be standoff ...
-
ToughSonic - Model UA-TS-TB-2RYC - Termination Board with Two Relays
Used to control valves, pumps, an small motors by a ToughSonic sensor. Avoid the need for other logic devices. Consolidates all power and interface wiring. Color-coded sensor wire landings. RJ-11 jack for direct connection to all Senix serial data interfaces and setup kits. Two Form-C dry contact relays rated 5A@250 VAC or 5A@24VDC with LED status indicators. DC power input terminals plus jack for UA-PS-750 power supply. Provides surge power protection on ...
-
ToughSonic - Model UA-RT1-1NPT & UA-RT1-30MM - Reference Target
When vigorous temperature fluctuations affect sensor readings, using a Reference Target can improve ultrasonic accuracy. Delrin adapter works with 30mm or 1” NPT ToughSonic 3 and 14 sensors, adapter fits 2” NPT tank ...
-
ToughSonic - Elevated 2 in NPT Adapter for 30 mm Sensors
Elevated 2 Inch NPT to 30 mm Thread Adapter: Allows 30 mm sensors to thread into 2 inch NPT fittings. Elevated to compensate for sensor deadband. Delrin. Quantity: ...
-
ToughSonic - 30mm Block Clamp Mount
30mm Block Clamp Mount: Clamp style mount. Compatible with 30mm sensors. PVC. Quantity: ...
-
ToughSonic - 1.5 Inch NPT Female Thread Adaptor
1.5″ NPT Female Thread Adaptor: 5 inch base. Made of PVC OR Stainless-steel. Quantity: ...
-
ToughSonic - 2 Inch NPT Female Thread Adaptor
2″ NPT Female Thread Adaptor:6 inch base. Made of PVC OR Stainless-steel. Quantity: ...
-
ToughSonic - 2.5 Inch NPT Female Thread Adaptor
2.5″ NPT Female Thread Adaptor: 7 inch base. Made of PVC OR Stainless-steel. Quantity: ...
-
ToughSonic - 30mm Swivel-Style Sensor Mount
30mm swivel-style sensor mount: Swivel Style mount. compatible with 30mm sensors. PVC. Quantity: ...
-
ToughSonic - 30mm Adjustable Multi-Axis Sensor Clamp
30mm adjustable multi-axis sensor clamp. Compatible with all 30mm Senix sensors. Mount the sensor in a variety of angles. Adjustable clamp. Quantity: ...
-
ToughSonic - Pair of 30mm Mounting Nuts
Compatible with any 30mm Senix sensor. Quantity ...
-
ToughSonic - Model RJ11 - Setup Cable for Termination Boards
RJ11 Cable: Connect with termination board or setup kit. 6 feet long. One included with each USB setup ...
-
ToughSonic - 90 Degree Low Profile Adapter
90 Degree Adapter: Allows compact installation. Maximum range is unaffected. Dead band inside adapter. 1″ NPT female thread. Stainless-Steel. Quantity: ...
-
ToughSonic - Serial to USB Converter with Isolated Inputs
Isolated Serial to USB Converter: Serial to USB Converter. Isolated inputs. Panel or DIN rail installation. Includes 3 foot USB cable. Quantity: ...
-
ToughSonic - Serial-to-USB Converter, Non-Isolated
Serial RS-232 to USB Converter. Non-isolated inputs. Serial to USB Converter. Non-Isolated Input. Includes 3 foot USB cable. Quantity: ...
-
ToughSonic - Universal DC Power Supply for Termination Boards
Power Supply for Termination Boards: Wall wart style power supply with modular global plug set. Plugs directly into any Senix Termination Board. Output 24 VDC @ 750 mA. Included in all Senix ToughSonic Setup ...
-
ToughSonic - Connection Cable
RS-485 or RS-232 options. RJ11 to DB9. 6 feet. Connect terminal boards to serial ...
-
ToughSonic - Cable and Terminal Board
Serial Cable with Terminal Board. For bench testing ToughSonic ultrasonic sensors. RJ11 to D89 with terminal board, 6 feet. Power jack (compatible with UA-PS-750-G). Available in RS-232 or ...
-
ToughSonic - Ultrasonic Sensor Extension Cables with Shield
Sensor cable with shield: PUR jacketed. Sold per foot. Can be purchased outright or potted into the sensor by special ...
-
ToughSonic - Model UA-PD6000 - Analog Display for Ultrasonic Sensors
Part # UA-PD6000. Analog display and process controller for ToughSonic ...
-
ToughSonic - Model UA-PD765 Serial - Display for Ultrasonic Sensor
Part # UA-PD765. Display display and process controller for ToughSonic ...
-
ToughSonic - Model UA-PD6080 - Analog and Serial Display for Ultrasonic Sensor
Part # UA-PD6080. Analog and Serial display and process controller for ToughSonic ...
-
ToughSonic - Connector & Cables
Senix offers a range of custom sensors cables. The sensor cables are assembled to the sensor and potted in and permanently attached and offered in a variety of lengths. A range of connector types and wiring configurations are available, and dependent upon type of ToughSonic sensor (4, 6, or 9 wire sensors). Mating cables are also available in a variety of lengths and connector ...
-
ToughSonic - Model UA-DBOX-LP1821 - 4-Digit Display for Ultrasonic Level Sensors
Part # UA-DBOX-LP1821. Level display and process controller for ultrasonic ...
-
TOUGHSONIC - 2 Inch NPT to 30 mm Thread Adapter
Allows 30 mm sensors to thread into 2 inch NPT fittings. Delrin. Quantity: ...
-
Others
-
ToughSonic - Model RTTC - System Provides Improved Temperature Compensation
Senix ultrasonic sensors have a temperature sensor inside the sensor technique to compensate for changes in ambient air temperature. As the ambient air warms or cools, the sensor body temperature follows slowly, and the embedded temperature sensor data is used to adjust the calculation for the speed of sound in a linear ...