10 products found
Skandia Elevator Products
-
L-Line - Elevators
-
Model SE 140 TVM - Elevator
SE140 TVM is manufactured from galvanised material and in accordance with the EU machinery directives. It is as standard a Category II 3D/0D Elevator and complies with the European ATEX directive 94/9EC. It is suitable for most materials to be handled in a farm drying and storage plant. SE 140 TVM is available in four models: 20, 30, 40 and 60. The different models give the following capacities when feeding on upgoing leg side. Remember that every 1% ...
-
Model KE 40 - Elevators
KE40 is manufactured from galvanised material and in accordance with the EU Machinery Directives. It can operate with most granular materials, flour and meal and at any angle between 45-90°. There are three different feeding alternatives: A: direct fed from a pit, B: onto a front leg enclosed inlet or C: with side feeder screws. It is as standard a Category II 3D/0D Elevator and complies with the European ATEX directive 94/9EC, when the external ...
-
L-Line - Conveyors
-
Model KTF - Conveyors
Manufactured from galvanized material and in accordance with the EU machinery directives. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC.Reversing is possible for lenghts up to 25 meter. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and the external is unclassified. If the conveyor operates in a plant where the external ...
-
Model KTF/R - Conveyors
Manufactured from galvanized material and in acc. with the EU machinery directives. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and the external is unclassified. If the conveyor operates in a plant where the external atmosphere is classified as Zone 22, Electrical motors ...
-
Model KTFb - Conveyors
Manufactured from galvanized material and in accordance with the EU machinery directives. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and the external is unclassified. If the conveyor operates in a plant where the external atmosphere is classified as Zone 22, Electrical ...
-
Model KTA - Chain & Flight Conveyors
Manufactured from galvanized material and in accordance with the EU machinery directives. It is suitable for 15°, 30° and 45° degree conveying. Brush gear for intermediate outlet cannot be used on KTA. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and the ...
-
Model KTAb - Chain & Flight Conveyors
Manufactured from galvanized material and in accordance with the EU machinery directives. It is suitable for 15°, 30° and 45° degree conveying. It runs very quiet and is totally enclosed and dust free in operation. Brush gear for intermediate outlets can not be used on KTAb. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different ...
-
Model KTB - Chain & Flight Conveyors
Manufactured from galvanized material and in accordance with the EU machinery directives. It is suitable for 15°, 30° and 45° to horizontal conveying. Brush gear for intermediate outlets can not be used on KTAb. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and ...
-
Skandia - Model SEI 50/23 - Belt & Bucket Elevator
SEI 50/23 is manufactured from galvanized material in accordance with the EU machinery directives. It is available in three models: 100, 120 and 150. The different models give the following capacities based on grain with 15% moisture content, bulk density 750 kg/m3, fed on upgoing side and at below specified nominal shaft rpm. Remember that every 1% increase in moisture content above 15%, decreases capacity by 3-4% ...
-
Skandia - Model SEH 80/28-33 - Belt & Bucket Elevator
SEH 80/28 and 80/33 is manufactured from galvanized material in accordance with the EU machinery directives. It is Category II 2D/0D elevator and complies with the European ATEX directive 94/9EC. It is suitable for most material to be handled in a drying and storage ...