5 products found
Sunpower Group Products
-
EPC for Flare System/Waste Water Treatment Project/Sulfur Recovery
Sunpower Energy Saving and Environmental Protection Division is engaged in engineering, manufacturing and constructing all kinds of flare gas recovering of systems including flare gas recovery, ground flare, waste water treatment project,Sulfur Recovery, etc. Flare System provides the complete sets of service of“ turn-key” project, provides Flare Gas Discharging System with intrinsic safety, HSE demonstration, and the reasonable demonstration of economical efficiency; provides the advanced processing equipment at home and abroad; carries out the design of flare tip and molecule sealer by the Fluent software; utilizes the software of CaesarⅡ and Flare NET to make the analysis of system hydraulic balance, pipe net’s stress system analysis, and pipe net design. The computer simulation and pertinent experiment at the factory ensures the intrinsic safety of the special products of flare series.
-
Sunpower - Flare and Flare Gas Recovery
Sunpower is able to reasonably arrange discharge and recycle systems per various discharge components after making a comprehensive analysis of flare discharge gases in order to utilize different flare gas components to a maximum ...
-
Heat Exchangers and Pressure Vessels
Main R&D institutes are included in our company ,suchas, Jiangsu Engineering Research Center for Energy Saving, technical center of company, academician station and other R&D department, focusing on research and development of heat transfer intensification, special shaped tubes and its heat exchanger, pressure vessel and high efficiency heat transfer element. Sunpower is a member of HTRI. The company owns large heat transferring test-bed, structure analysis software, CFD software, as well as workstation. The heat Transfer Research Institute and the R&D in the institute involves numerical modeling, experiments and industrial applications. The company has established a good relationship with several universities such as Nanjing University of Technology, East China University of Science and Technology, enhancing the cooperation of the fabrication, study and research, focusing on developing and designing heat exchanger the efficiency of the product.
-
Sunpower - Reaction Drum
Sunpower is certified for design and fabrication of A1 and A2 pressure vessels, pressurized pipeline supports and hangers, and engineering of GB2 and GC2 pressure piping. Our company is qualified as a Class A unit for Environmental Protection Engineering. It is accredited with PED certification for exporting equipments to European Union. It has ASME U and S stamps for pressure ...
-
Sunpower - Spiral-wound Heat Exchanger
LNG Plant & Coal Chemical Industry. Liquefaction Condenser. DN2600*10,000mm, 28tons. SS304. A spiral-wound heat exchanger (SWHE) comprises multiple layers of tubes wound helically around the central core (mandrel) with a constant longitudinal pitch. The coiling direction alternates from one layer to the next. Radial distances between each layer are held constant by space bars. The tube-side fluids are in spiral flow, and the shell-side fluid passes ...
-
High Efficiency Heat Transfer Element
Sunpower`s Corrugated Tube Heat Exchanger is mainly used under the condition of heat transfer with heating and cooling. The material of the corrugated tubes can be thin-wall stainless steel, copper and carbon steel. The inner pipe wall can change the fluid flow state, and the outer pipe wall can increase the heat transfer area and impulsive motion so as to achieve the purpose of heat transfer on the two sides. The heat transfer coefficient of Corrugated Tube Heat Exchanger is 1.2 to 2.4 times of that of normal shell-and-tube heat exchanger. Because of the good compensation of the the special wave-shaped section the corrugated tubes, the tubesheet will not fail with cracks induced by over pulling stress.
-
SunPower - Various Special Shaped Tubes for Effective Heat Transfer
Corrugated low finned tubes are special shaped tube with ripples on inner pipe wall and thread arc fillisters on outer pipe wall, which can enhance the impulsive motion of turbulent current of the fluid in and out of the pipe, change the flow state between fluid layer and pipe wall, break the boundary layer, intensify heat transfer and clean up the dirt while the fluid flushes the pipe wall, The heat transfer coefficient of corrugated low finned pipe is ...
-
Sunpower - Spiral Heat Exchanger
Spiral Plate Heat Exchanger is an assembly of two or more long sheets, usually separated by studs, wrapped to form concentric spiral channels. Turbulent flows occur in the spiral channels at lower Reynolds number due to the studs and centrifugal force and a higher heat transfer coefficient is ...