7 products found
Thermal Instrument Co. Products
-
Thermal Instrument - Model 62-9DT - Thermal Mass Flow Meters
The Thermal Mass Probe Flow meter is inserted directly into the flow stream to measure the flow rate of gases, liquids, or slurries in stacks, irregularly shaped lines, and process ducts. Unlike other probe flow meters, we offer a model that has no apertures that can be clogged with particles or distorted by wear. Our sensors are enclosed in a sealed tube which can be inserted or removed through a gate valve or a packing gland while conduit is in use. We ...
-
Thermal Instrument - Model 600-9 - Unobstructed Flow Path In-Line Flow Meter
Our In-line Thermal Mass Flow meter Model 600-9, employs a unique design where the RTD sensors are mounted to the outer circumference of a pipe or tube in order to keep the sensors from coming into contact with the fluid passing through the instrument. This unique design allows for a fully unobstructed flow path and negligible pressure drop to your process ...
-
Thermal Instrument - Model FS16 - Thermal Mass Flow Switch / Transmitter
Increased features, performance, and versatility are available in the FS16 Flow Switch. The FS16 provides visibility to the flow rate while providing alarm set Thermal Instrument Model # 600-9/FS16 Dual Alarm Flow Switch. Pictured with 1/2" MNPT Pipe Connection for Water Flow. Flow Indicator @ 40% of Full Scale Flow Rate. points to help monitor your critical processes. Additionally, the FS16 can be configured to deliver fluid temperature across a 4-20 mA ...
-
Thermal Instrument - Model FS - Thermal Mass Flow Switch
The durability, accuracy, versatility, and ease of use of this mass flow switch make it the economical choice for your process flow application. The electronics are built into an cast aluminum condulet which can be mounted as an integral part on the Model 62-9 and 600-9. Allowing a plant technician to accurately field set the trip point by adjusting the potentiometer. Using a voltmeter, the technician can then compare trip point voltage with the ...
-
Thermal Instrument - Model 9500 & 9500P - Microprocessor Electronic Transmitter
A uniquely designed microprocessor controlled electronic transmitter provides integral local control and display in an explosion proof housing for our mass flow meters. Optional remote mounting of the electronic transmitter up to a distance of 4000 ft. from the mass flow meter sensor provides additional versatility depending on the application. Flow signal linearity and temperature effects, determined at calibration, are corrected by the microprocessor ...
-
Thermal Instrument - Model 9200B - Multi-Function Flow Computer
The Thermal Instrument 9200B special purpose flow computer accepts analog input from the thermal mass flow meter and provides linearization of the sensor and scaling to the Flow Rate and Total indicators. A variety of Pulse Outputs, Analog Outputs, Control Inputs, Relay Alarms and RS-232 Outputs are provided standard. RS-485 Modbus RTU is also an ordering ...
-
Thermal Instrument - Model 926 - Analog/Digital Signal Conductor
Takes the non-linear analog flow signal from one of our probe or in-line flow transducers and converts it to a linear output signal. Unique 12 bit data system assures signal smoothness and optimum accuracy. In order to maximize efficiency and minimize heat generation, switching supplies are used. Options available include: local display of Flow, 8 digit Totalization and HI/LO alarm set ...