17 products found
Products by Cutting Systems, Inc.
-
Slasher Saws
-
Model DL-4400 - Revolver Saw
The CSI Model DL-4400-R Revolver features a saw box that rotates to accomodate a left or right handed load operation. This allows the operator to orient the saw box in either position quicker and easier. The DL-4400-R also features a redesigned chassis construction to help keep the stems flat for smooth, clean cuts on uneven ground. As with our other saws, the Revolver is built from hi-alloy tubing and hi-alloy steel plate by skilled workers to ensure a ...
-
Delimbers
-
Model PTD-264 - Ultra Delimber
This 4-knife pull-thru delimber comes equipped with an integrated topping saw. It is suited for use in hardwood or pine. The 72' wide throat opening, a special roller, and our unique knife design makes delimbing trees smooth and easy. It comes mounted on a cradle constructed of high alloy steel. We also use top quality rotation bearings, pivot bushings, and rollers. Its ease of operation yields maximum ...
-
Model PTD-264 NTS - Delimber
Our PTD-264-NTS is designed with the same rugged features and quality as our PTD-264, without the integrated topping saw for operators who do not require that ...
-
Model PTD-203 - Delimber
This 3-knife pull-thru delimber features a 20' throat opening. It is designed for less productive contractors harvesting pine and hardwood using smaller knuckle boom loaders. Available with or without a topping ...
-
Delimber Trailers
-
Model DT-2500 - Delimber Trailer
The DT - 2500 Delimber Trailer was designed with mobility and flexibility in mind. Made with a single heavy-weight I-beam rail, the DT-2500 offers easy towability to and from the jobsite, and allows the operator to position it exactly where required for optimal production. The DT-2500 also features a heavy-duty 22,000 lb axle and 1100-22.5-12ply tires. The DT-2500 is equipped with highway lighting and a fixed front spade, and is available with your choice ...
-
Model DT-2600 - Delimber Trailer
The DT - 2600 Delimber Trailer has same rugged features and mobility as the DT-2500 Delimber Trailer, but with heavy-weight dual channel construction. This allows you to carry one of our slasher saws on the trailer chassis during transport. The DT-2600 is also equipped with highway lighting and a fixed front spade, and is available with your choice of PTD-143, PTD-243, PTD-264, or PTD-264-NTS ...
-
Model IDT-2800 - Independent Delimber Trailer
The IDT-2800 is a self-contained power unit including a diesel engine, hydraulic power pack, and radio remote which allows you to run our delimbers without attachment to loader ...
-
Felling Head
-
Model DFH-3526 - Grapple Felling Saw Head
The model DFH-3526 is a grapple felling saw head designed for use on excavator-type carriers. The saw head incorporates a dangle hook-up system, and features bar and chain cutting technology. Expertly designed, and built from the finest alloy steel, our saw head is rugged and robust enough to withstand the daily punishment of a logging operation. The DFH-3526 is equipped with a 3/4 pitch chain, running on a 37” bar. You can do a 26” cut in a ...
-
Other Products
-
Model 1850 - Firewood Processor
The model 1850 is a one man portable firewood mill designed for ease of operation, high production and low maintenance. CSI employees have had years of experience in building firewood processors and was the original builder of the CTR model 1800 firewood processor. With all of our experience in the hydraulic chain and bar slasher saws, CSI has developed these firewood mills to be the highest quality, safest and most productive available. The model 1850 ...
Products by Trail King Industries Inc
-
Open Deck Construction
-
Model HDG - Hydraulic Detachable Gooseneck Trailer
Engineered to make unhooking, loading/unloading, and hooking up again a simple one-person operation, this detachable lowboy has become the "go to" choice for construction professionals all across North ...
-
Materials Hauling Construction
-
TrailKing - Model SSD - Steel Side Dump Trailers
Two-piece rolled design of the tub delivers fast, clean dumping of your payload away from the trailer, with no "carry ...
-
Agricultural Trailer
-
TrailKing - Model AHT - Aluminum Grain Hopper
Rugged, lightweight, corrosion-resistant grain hopper trailer… a workhorse for your farming ...
Products by Astec Industries, Inc
-
Drum Chippers
-
Model 4310B - Track Mounted Drum Chipper
The track mounted 4310B Drum Chipper is suited for high volume biomass producers who have a wide variety of feed material from brush and small feed stock to logs up to 24 inches (61 cm) in diameter. The 4310B is powered by a 765 horsepower (570 kW) C18 Caterpillar engine. At 58,500 pounds (26 535 kg), the track mounted 4310B is designed for operations requiring high production and frequent moves between ...
-
Disc Chippers
-
Model 5000H - Whole Tree Chipper
The Peterson 5000H Delimber Debarker Disc Chipper produces high quality low bark content chips for wood pulp and pellets, processing whole trees in one continuous operation. Equipped with a large feed throat, this whole tree chipper can accept up to a 23 inch (56 cm) diameter single tree or multiple smaller stems. The 5000H can be configured with a three or four pocket disc, with several optional sheave sizes to make precisely the chip you need. The ...
-
Peterson - Model 5900E - Disc Chipper
The Peterson 5900E disc chipper produces high quality paper chips when used with a Peterson 4800F debarker, or fuel chips as a stand alone fuel wood chipper. The 5900E is powered by a Caterpillar C18, Tier III, 765hp (570kW) engine, which is both fuel efficient and maintenance friendly. The 5900E can be configured with a three or four pocket disc, with several optional sheave sizes to make precisely the chip you need. Chipping production rates from 60 to ...
-
Flails
-
Model 4800F - Chain Flail Debarker
Continuing Peterson’s long history of innovation, this 6th generation design has the features that clean chip operations demand. The Peterson 4800F multiple log delimber/debarker is designed to be used in tandem with whole tree chippers to produce high quality pulp chips. Capable of processing multiple logs from 2 to 23 inches (5–58 cm) in diameter, the 4800F increases productivity while reducing bark content, product handling time, and fiber ...
-
Model 4810F - Chain Flail Debarker
Peterson’s 4810F tracked chain flail is engineered for optimal efficiency and productivity. With a compact footprint, it is easily maneuverable for repositioning to new job sites. No wonder it’s the machine of choice for in-field chipping. Increase your productivity and decrease product handling times. The 4810F is designed to debark multiple logs and works in tandem with a whole tree chipper to produce high quality pulp chips. The 52 ½ ...