16 products found
ThyssenKrupp Uhde GmbH Products
-
Pre-Reduction Plants
-
Mobile Crushing Plants
Mobile ThyssenKrupp crushing plants are in operation all around the world. It was ThyssenKrupp that pioneered mobile crushing plants, thereby making it possible to crush minerals directly at the site of extraction and synchronize to the rate of mining advance, into sizes ready for conveyor transport of the crushed material from the mining face to the processing ...
-
Semi-Mobile Crushing Plants
Mobile crushing plants are built ready-mounted on their own travel gear. Semi-mobile plants, on the other hand, are moved from one location to the next as a piggyback load on separate haul units. Each crushing plant comes ready to operate with its own feed hopper, feed conveyor, discharge conveyor and material transfer belt. The size and design of the crusher naturally depends upon the work that it is intended for. Semi-mobile crushing plants are always ...
-
Stationary Crushing Plants
ThyssenKrupp builds and installs turnkey processing plants from stationary primary crusher plants right up to hardrock processing plants with all components. The planning of a completely new plant for the cement, lime and gypsum industries is performed by longtime experienced specialists. They determine the required process techniques, the design and the manufacture of the machines and components and then finally install, erect and commission the complete ...
-
Mammut - Single-Shaft Hammer Crusher
Uncomplicated and compact in design, rugged in its construction, extremely powerful and completely safe in operation and with a minimum maintenance requirement: Over the years, secured for itself a firm place in the cement, limestone and gypsum industry. The MAMMUT-crusher is fitted with a number of auxiliary devices which ensure that the main wearing parts can be removed and refitted very speedly and with minimum ...
-
Titan - Double-Shaft Hammer Crusher
The TITAN Double-Shaft Hammer Crusher is used for crushing medium-hard rock. For wet limestone, wet marl, clay, chalk, gypsum and similar raw materials. It permits a large feed size and is capable of producing a clearly defined finished product size being preselected by the gaps of the discharge grate and therefore able to produce fedd material for ball mills, high pressure grinding mills and vertical roller mills. This crusher distinguishes itself by its ...
-
Impact Crushers
ThyssenKrupp impact crushers have an operating range which includes both coarse and fine crushing. They crush medium-hard to hard material. The ThyssenKrupp Impact Crusher produces a single stage perfect feed material for a vertical roller mill. ThyssenKrupp impact crushers are installed as stationary, semi-mobile or mobile crushing plants with plant capacities of more then 4,000 ...
-
Double-Roll-Crusher
Double-Roll-Crushers are used for the crushing or medium-hard rock as well as for sticky and soft materials, i.e. clay, marl, limestone and similar raw materials. Sticky and soft materials are reliably crushed in 2 or 3 stages down to the required product size. Due to the low crushing ration, the ThyssenKrupp Double-Roll-Crusher is producing a product size ditribution with less content of fines and therefore it is the most suitable machine for the ...
-
RollSizer
The RollSizer are capable of crushing medium-hard rock as well as sticky and soft material such as coal, clay, marl, limestone and similar raw ...
-
Gyratory Crusher
The design of the gyratory crushers and jaw gyratory crushers is based on more than one hundred years of experience. ThyssenKrupp gyratory crushers represent today‘s state-of-the-art. They are designed for high throughput rates and high crushing ratios at low operating and maintenance ...
-
Kubria - Cone Crusher
Advanced technology means highest outputs, low operating cost, minimum maintenance, simple operation and maximum ...
-
Chlor-Alkali Electrolysis
-
Model BiTAC - Filter Press
The first generation of the BiTAC Family, BiTAC, was developed to attain the highest current density operation at the lowest possible power consumption while minimizing mechanical damage to the ion exchange membranes, which tend to be more vulnerable to damage in a zero-gap environment. The design philosophy of the BiTAC family has been maintained throughout the development of each generation – BiTAC, n-BiTAC and nx-BiTAC, each contributing to an ...
-
chlor-alkali - Model BM 2.7 - Electrolysis Technology
tk Uhde Chlorine Engineers' proven BM 2.7 electrolysis technology combines the positive accomplishments of the past with the advantages of the latest developments. The combination of a zero gap design with the single element philosophy creates a unique technology which offers three key ...
-
Skid Mounted Plants
-
Model 5,000 TPY - Small Scale Chlorine Plants
Small-scale chlorine plants are becoming important for chlorine consumers, driven by the economic development of rural areas and the increasing pressure to regulate liquid chlorine transportation. Feasibility for such plants is driven by the reduced investment cost, automated operation, energy efficiency and a limited environmental ...
-
Model 15,000 TPY - Skid Mounted Plant
The design of our skid-mounted plant is based on the integration of standardized functional groups (e.g. brine purification, electrolysis with catholyte circulation and brine dechlorination, waste gas dechlorination...), allowing flexible plant layouts to fit specific customer requirements. thyssenkrupp Uhde Chlorine Engineers, together with AkzoNobel, has developed a standardized skid-mounted chlor-alkali plant with a design capacity of 15,000 mtpy ...
-
Skid Mounted Brine Treatment Plant
Brine purification is a fundamental step in the operation of a membrane chlor-alkali plant. Brine purity is important for the overall lifetime of membranes and electrodes, as well as power consumption and energy efficiency. thyssenkrupp Uhde Chlorine Engineers has a broad range of experience in brine treatment both for NaCl and KCl, with the possibility to design brine purification systems according to the salt available from different sources. Skids for ...
-
Skid Mounted Chlorine Plants
In skid-mounted chlorine plants from thyssenkrupp Uhde Chlorine Engineers the chlorine and hydrogen cooling and filtration systems are integral part of the electrolysis group. For the production of HCl or sodium hypochlorite, no further treatment is necessary for those gases. If dry chlorine is requested for downstream processes or chlorine liquefaction, a dedicated chlorine drying system is necessary. Our chlorine drying system is based on the use of a ...