9 products found

Products by Kirby Mfg Inc

  • Kirby - One-Ton Bale Processor

    Kirby - One-Ton Bale Processor

    Kirby’s One-Ton Bale Processor is simple to use, durable, and easily maintained, which makes it the most efficient feeding machine on the market. One person can hook up this bale processor to a tractor and begin turning bales of hay into a palatable feed in half the normal time.

  • Kirby - Feed Wagon

    Kirby - Feed Wagon

    Production is increased while feed loss, labor and maintenance are reduced through the use of Kirby Feeders. This equipment easily handles silage, haylage, grain and alfalfa cubes or can be used as a blender to mix these ingredients. Loaded in the field from forage harvester or loaded from a silo, your Kirby Feeder moves directly to feeding pens and distributes controlled amounts of feed to your livestock.

  • Kirby - Commercial Manure Spreader

    Kirby - Commercial Manure Spreader

    Reversible Hydraulic/Planetary Floor Drive with Variable Speed. Self Contained Hydraulic System w/ Filter, Pump, Valves, Pressure Relief, & Reservoir. Detachable Twin Beater Assembly. Reinforced Floor - 3' Cross-members on 12' centers. Dual Axle Fenders. Independent Floor Chain Adjustments. Structural Steel Channel Frame. Head Board.

  • Kirby - Freestall Wagons

    Kirby - Freestall Wagons

    Standard Equipment - Freestall Bedding Wagon. 24” Right-Hand, High-Speed Belt Crossfeed. 540 PTO. Two Beaters with Round Steel Pegs. Single Axle Trailer. 12.5L x 16 – 12 Ply Floatation Tires. Heavy Duty Pin Type Hitch.

  • Kirby - Strawbedding Wagon

    Kirby - Strawbedding Wagon

    Reversible Hydraulic Floor Drive and Variable Speed. Two Beaters with Serrated knives. Push Gate. Single Axle Trailer. 16.5 x 16.1 Tires. 1000 RPM PTO Pump. Self Contained Hydraulic System with: Filter, Pump, Reservoir, Valves, Pressure Relief.

Products by Kuhns Mfg. LLC

  • Grabber

  • Model KN615F Tie - Grabber

    Model KN615F Tie - Grabber

    The KN615F picks up the bales 5 wide and 3 long on their strings, using 30 teeth on 6 bars. The operator approaches the bale group with a strand of twine already stretched across the back plate of the Tie-Grabber. The hydraulic squeeze bar ensures the group is packed tightly together  before the teeth are set. After the teeth are set, the arm completes the rotation around the group and the knotter ties the twine tight, ensuring stable...

  • Model 618  - Grabber

    Model 618 - Grabber

    The 618 picks up the bales 6 wide and 3 long on edge using 36 teeth on 6 bars. It handles 14x18” bales 32'- 36' long with no adjustments. If you want your bales longer than 36', an extended version of this grabber is available.

  • Stackwagon  - Model NH618 – 18 - Grabber

    Stackwagon - Model NH618 – 18 - Grabber

    Lift capacity is an estimate based on an average bale weight of 40-50 pounds. However, it is up to the individual to determine their specific loader requirements.

  • Stackwagon  - Model NH615 – 15 - Grabber

    Stackwagon - Model NH615 – 15 - Grabber

    Lift capacity is an estimate based on an average bale weight of 40-50 pounds. However, it is up to the individual to determine their specific loader requirements.