10 products found
Van Aarsen International B.V. Products
-
Van Aarsen - Dosing Weigher Units
Dosing and weighing accuracy is crucial for producing the correct quality of the compound feed and produce at the lowest cost price for the feed miller. The Van Aarsen dosing weighers are designed to dose and weigh small quantities of ingredients, which are suitable for a wide range of products used in the animal feed milling industry. These ingredients all have different bulk densities and flowing ...
-
Van Aarsen - Animal Feed Hammer Mills
The GD and 2D hammer mills are designed for the animal feed industry, to grind raw materials into small particles and meal. Both the GD and 2D hammer mill series cover capacities ranging from 5 – 100 tons per hour, dependent on type of raw material, formula and required grinding structure and can be incorporated in a pre-grinding as well as a post grinding system as a complete grinding solution including pre-bin, feeder, magnet cleaner, hammer mill, ...
-
Van Aarsen - Mixers
The range of single & twin shaft Van Aarsen MultiMix paddle mixers and liquid mixers are designed to mix a wide range of raw materials, additives and liquids into a homogeneous animal feed mixture, all within a short mixing ...
-
Van Aarsen - Conditioners
Conditioning is the result of the three variables moisture, temperature and time. As moisture and temperature are related, time is the ultimate variable to enhance the process. Time can be gained with the application of a Long Term Conditioner (LTC). The LTC, consisting of a steam mixer, automatic steam quantity control and a Long Term Vessel (LTV), significantly improves the process of feed conditioning. This has a major effect on biosecurity, optimizing ...
-
Van Aarsen - Animal Feed Pelleting Machines
Animal feed pellets can be produced in several diameters and hardness, by pelletizing raw materials after grinding, mixing and conditioning. The Van Aarsen C and CU pellet mill range enable capacities up to 60 tons per hour depending on various parameters. They offer low operational costs per ton feed, even down to 1 €/ton, including dies, rollers and wear ...
-
Van Aarsen - Counterflow Cooling System
The Van Aarsen counterflow cooling system is designed for cooling pellets after pelletizing back to ± 5°C above ambient air temperature. This is done to achieve a good PDI, flow ability, protect against decay and minimize chemical and biochemical ...
-
Van Aarsen - Crumbler
During crumbling pellets are reduced to crumbs. The advantages of the pelleting process are maintained as much as possible. The size of the crumbs is adapted to the need of the animal and the feeding system. Meal intake consumes a lot of energy for an animal; crumbs on the other hand can be quickly and easily ...
-
Van Aarsen - Sieves
Sieving of raw materials may take place at the beginning of the process or after pelleting and crumbling and is intended to separate sizes. By sieving the raw materials first, the grinding process is optimized and energy can be saved. Smaller sizes do not need to be grinded. By sieving pellets and crumbles fines are sorted out, improving the quality of the end product. The fines itself are returned into the process preventing waste of raw ...
-
Van Aarsen - Bulk Robot Weighers
The moveable Van Aarsen Bulk Robot Weighers have been designed for fully automatic bulk loading of trucks with animal feed. The Van Aarsen Bulk Weighers are equipped with some of today’s most innovative features for maximum efficiency, performance, and ease of ...
-
Hot Air Hygienic Systems
The hot air hygienic system makes sure that the temperature of the machines in the pelleting line is kept at a set value, particularly during the short and long term stops in between the production runs. It provides conditions that inhibit growth of pathogenic germs such as salmonella, the prevention of condensation, the drying of the product-remains after the production process and the heating of the system before the start of the ...