11 products found
Welesgard Products
-
Model WG-Ferrogalvanic SP - Pre-Fabrication Primer
One component fast dry primer based on combined binding agent and zinc pigment complex of spherical and flake shapes. It provides temporary protection of metal surfaces against corrosion for the period of manufacturing of structures, as well as their assembly after factory supply at the object until application of corrosion protection primary ...
-
Polyurethane Coatings, Moisture Cured
One component anticorrosion coatings, chemically cure by reaction with air moisture in the course of evaporation of solvents. The materials may be applied at high relative humidity (up to 99%), low temperatures (up to -15°C) and without restrictions on the dew point.
-
Model WG-Ferrogalvanic - Moisture Curing Single Pack Zinc Rich Urethane Primer
WG-Ferrogalvanic is a highly efficient single pack polyurethane anticorrosive solvent-based moisture-cured primer. WG-Ferrogalvanic is a product which has a unique system with zinc and micaceous iron oxide (MIO). These components yield a reliable long-term coating with protective and barrier properties for prepared steel surfaces. This primer can be used on poorly prepared steel ...
-
Model WG-Welestone - Moisture Curing Single Pack Urethane Primer
WG-Welestone is a highly efficient single pack polyurethane anticorrosive solvent-based moisture-cured primer. The primer can be applied at high relative humidity, subzero temperatures and without restriction on dew point. Has no restriction on the maximum overcoating time. WG-Welestone is a primer with high solids content, containing aluminium and micaceous iron oxide (MIO) additives, Application on not thoroughly prepared surfaces is possible. ...
-
Model WG-Welesilver - Moisture Curing Single Pack Urethane Finish Coating of Aluminium-Colored
WG-Welesilver is single pack polyurethane, moisture curing coating designed to create decorative finishing layer in one-component moisture-curing systems urethane coatings. WG-Welesilver is an UV resistant coating of aluminic colour with high solid residue level, has perfect impact, corrosion and abrasive resistance. The coating can be applied at high relative humidity, subzero temperatures and without restrictions on the dew point. WG-Welesilver can be ...
-
Model WG-Sulacover - Moisture Curing Single Pack Urethane Finish
WG-Sulacover is single pack polyurethane, moisture curing coating designed to create decorative finishing layer in single pack moisture-curing systems urethane coatings. WG-Sulacover has excellent resistance to UV, color stability, atmospheric influence and abrasion resistance. The coating can be applied at high relative humidity, subzero temperatures and without restrictions on the dew ...
-
Model WG-Weleflex - Moisture Curing Single Pack Intermediate Urethane Coating
WG-Weleflex is single pack moisture curing solvent based polyurethane intermediate coating compounded with micaceous iron oxide (MIO). WG-Weleflex has outstanding corrosion resistance and barrier properties when applying for immersion conditions, in splash zone or in the outdoor areas. Does not contain coal tar and may have light colors that facilitate inspection of internal tank surfaces. WG-Weleflex can be applied at high relative humidity, subzero ...
-
Polyurethane Pipe Coatings
Thick layer fast setting Two component polyurethane coatings applied mainly for the insulation of exterior surfaces of main pipelines, fittings and armature immersed in fresh (Im-1, according to ISO 12944-2) or sea water (Im-2), and also buried in soil (Im-3).
-
Model WG-Welepipe - Two-Pack, Solvent Free, Thick-Layer Polyurethane Coating
WG-Welepipe is a two-pack, solvent free, thick-layer polyurethane coating, which is intended for application through airless spraying. The coating is applied in one layer to dry film thickness from 0.5 to 3 mm in the field or factory by airless spraying using special ...
-
Model WG-Welepipe BG - Two Pack Thick-Layer Polyurethane Coating Without Solvent
WG-Welepipe BG is a two-pack thick-layer polyurethane coat not containing solvent, which is intended for application using a brush or a putty knife, and ensures durable and maintenance-free protection of concrete and metal surfaces. Therefore, it can be applied as a single layer on the dry film of 0.5 to 1.0 mm thick. WG-Welepipe BG combines exceptional resistance to abrasive wear and shock and considerable ...
-
Alkyd and Acrylic Coatings
Welesgard acryl and alkyd coatings are suspension of pigments and special additives in solution of modified alkyd or acrylic binding agent, forming the systems with high resistance to corrosion. Welesgard acryl and alkyd coatings are specially designed for effective protection of the segment of structures and equipment operated under conditions of low C2, medium C3 and high C4 atmospheric corrosion categories of media (according to ISO 12944-2), providing improved anticorrosion and weather resistance, resistance to effect of water, oils and weak chemical solutions with low costs of coating system.
-
Model WG-Universal - Quick-Drying Alkyd-Acrylic Enamel Primer
WG-Universal – versatile, fast drying enamel-primer with excellent UV and atmospheric effects resistance. WG-Universal – special suspension of pigments and additives in a modified acrylic binder solution with addition of anticorrosive complex fillers forming system with high corrosion ...
-
Heat Resistant Coating
-
Model WG-Termaprime - Single Pack Moisture Curing Primer Filled With Zinc
WG-Termаprime – single pack high-temperature primer filled with zinc on the basis of organosilicon compounds. WG-Termаprime – moisture curing primer in conditions of environment with high solid residue and low content of volatile organic compounds ...
-
Epoxy Coatings
Two components epoxy thick layer coating used for protection of steel and concrete structures operating in corrosive environments.
-
Model WG-Weleforce - Epoxy Coatings
WG-Weleforce is epoxy coating resistant to significant chemical and mechanical stress with high volume solid. Available in different RAL ...