10 products found
Products by
-
Biomass Chippers
-
Model CH885 - Ultra-High Capacity Whole Tree Chipper
The CH885 is an ultra-high capacity whole tree chipper; a giant step forward in drum chipper design. The drum is 54' tall, 53' wide, with a 1' thick drum surface, and warranted against material and workmanship failure for 5 years. The sloped infeed chain carries limbs, tops and full trees reliably to 3 feedwheels - 2 vertical and 1 large horizontal. The feedwheels snap forks and guide even unruly material into the oversized drum chamber with little or no ...
-
Forestry Forwarders
-
Barko - Model 409 - Forwarder
The 409 is a 9 ton machine equipped with a Tier III Cummins 130HP engine. Weighing in at only 25,600 lbs, the 409 Forwarder has low ground pressure to minimize disturbance and is easy to transport with low overall width and height. All forwarders feature a Danfoss Plus+1 control system for ease of use as well as for ...
-
Tractors
-
Model 920 - Industrial Tractor
The Barko 920 delivers more of what you want in a mulcher... POWER. Barko brings more hydraulic horsepower to the mulcher head than any other product on the market and performs all day long with the best fuel efficiency in the industry. Barko mulchers get the job done in the most demanding site-prep and land clearing environments. Combined with a highly maneuverable carrier engineered to withstand extreme stress and tough terrain, the 920 provides ...
-
Barko - Model 930 - Industrial Tractor
The Barko 930 Industrial Tractor delivers FAR MORE power (hydraulic HP) to the mulcher head than any other product on the market. From day one, this BEAST was built to 'tear-it-up', ripping its' way through the most demanding right-of-way land clearing and site prep. With a highly maneuverable carrier built to withstand extreme stress and tough terrain, the 930 is the top mulcher for large commercial and municipal applications. It also provides the best ...
-
Model 937 - Industrial Tractor
The Barko 937 Industrial Tractor delivers FAR MORE power (hydraulic HP) to the mulcher head than any other product on the market. From day one, this BEAST was built to 'tear-it-up', ripping its' way through the most demanding right-of-way land clearing and site prep. With a highly maneuverable carrier built to withstand extreme stress and tough terrain, the 937 is the top mulcher for large commercial and municipal applications. It also provides the best ...
Products by Astec Industries, Inc
-
Drum Chippers
-
Model 4310B - Track Mounted Drum Chipper
The track mounted 4310B Drum Chipper is suited for high volume biomass producers who have a wide variety of feed material from brush and small feed stock to logs up to 24 inches (61 cm) in diameter. The 4310B is powered by a 765 horsepower (570 kW) C18 Caterpillar engine. At 58,500 pounds (26 535 kg), the track mounted 4310B is designed for operations requiring high production and frequent moves between ...
-
Disc Chippers
-
Model 5000H - Whole Tree Chipper
The Peterson 5000H Delimber Debarker Disc Chipper produces high quality low bark content chips for wood pulp and pellets, processing whole trees in one continuous operation. Equipped with a large feed throat, this whole tree chipper can accept up to a 23 inch (56 cm) diameter single tree or multiple smaller stems. The 5000H can be configured with a three or four pocket disc, with several optional sheave sizes to make precisely the chip you need. The ...
-
Peterson - Model 5900E - Disc Chipper
The Peterson 5900E disc chipper produces high quality paper chips when used with a Peterson 4800F debarker, or fuel chips as a stand alone fuel wood chipper. The 5900E is powered by a Caterpillar C18, Tier III, 765hp (570kW) engine, which is both fuel efficient and maintenance friendly. The 5900E can be configured with a three or four pocket disc, with several optional sheave sizes to make precisely the chip you need. Chipping production rates from 60 to ...
-
Flails
-
Model 4800F - Chain Flail Debarker
Continuing Peterson’s long history of innovation, this 6th generation design has the features that clean chip operations demand. The Peterson 4800F multiple log delimber/debarker is designed to be used in tandem with whole tree chippers to produce high quality pulp chips. Capable of processing multiple logs from 2 to 23 inches (5–58 cm) in diameter, the 4800F increases productivity while reducing bark content, product handling time, and fiber ...
-
Model 4810F - Chain Flail Debarker
Peterson’s 4810F tracked chain flail is engineered for optimal efficiency and productivity. With a compact footprint, it is easily maneuverable for repositioning to new job sites. No wonder it’s the machine of choice for in-field chipping. Increase your productivity and decrease product handling times. The 4810F is designed to debark multiple logs and works in tandem with a whole tree chipper to produce high quality pulp chips. The 52 ½ ...