Agriculture Machines Equipment For Crop Cultivation Available In Jamaica
-
PremiumManufactured by AMS, Inc.based in USA
The 2" X 2' One-Piece Combination Edelman Auger is capable of augering down to 2'. The attached 16" Rubber-Gripped Cross Handle is welded to the steel shaft which is also welded to an Eijkelkamp Combination Edelman Auger Head. It is versatile, lightweight, and easy to use. It requires no assembly in the field and works well in a variety of soil conditions. The One-Piece Combination Edelman Auger ...
-
PremiumManufactured by Sutter Equipment Company, Inc.based in USA
The Sutter Trail Rock Rake is the ideal landscape rake for trail maintenance and grooming, farmers, contractors, homeowners, and professional ...
-
PremiumManufactured by AFKO Ltd. Şti.based in TURKEY
AFKO Center pivot irrigation systems main pipes: Mainly, AFKO uses several types of pipes, the ones used inside the pivot are galvanized, plugs for sprinklers with spacing of 113″. they are called main pipes as they are the main component of the pivot system, the main pipe is provided in two main lengths: ...
-
PremiumManufactured by Zeltex LLCbased in USA
EvoNIR 4.0 Analyzer with ISOBUS protocol can be connected to any virtual terminal with built-in ISOBUS task controller and can be installed on forage harvesters, combines, balers, forage wagons, slurry tankers, compactors, feed mixers and portable in a carrying ...
-
PremiumManufactured by AFKO Ltd. Şti.based in TURKEY
This system consist of many spans connected to each other by mobile connection, all spans move and rotate around a fixed center. Every two spans are connected by a multidirectional joint allowing the formation of an angle of up to 30 degree. Thus the pivot is suitable for rough terrain. This system irrigates from 1 hacter by one span up to 75 by 8 spans 490 m machine. ...
-
PremiumManufactured by AFKO Ltd. Şti.based in TURKEY
Enclosed collector ring to supply continuous power and signal voltage to the motors and controls on center pivot irrigation ...
-
PremiumManufactured by AMS, Inc.based in USA
The 2-3/4" X 3' One-Piece Combination Edelman Auger is capable of augering down to 3'. The attached 16" Rubber-Gripped Cross Handle is welded to the steel shaft which is also welded to an Eijkelkamp Combination Edelman Auger Head. It is versatile, lightweight, and easy to use. It requires no assembly in the field and works well in a variety of soil conditions. The One-Piece Combination Edelman ...
-
Manufactured by FACMA s.r.l.based in ITALY
Safe - Not removable protection frame ROPS; automatic braking in neutral and in standby position; very low centre of ...
-
Distributed by Watling JCB Limitedbased in UNITED KINGDOM
The demands placed on agricultural machines are extreme: more extensive farms mean more distance to travel and more time spent in the cab carrying out more diverse tasks. The JCB Loadall gives – and keeps on giving – you more. Part of the JCB agricultural range, the 25 Loadall models (more than any other manufacturer) build on our heritage in agriculture and the experience gained since we ...
-
Manufactured by Shuliy Machinery Co. Ltd.based in CHINA
Agricultural machinery and machines play an important role in farming, solving a variety of problems such as grain harvesting, grass harvesting, seeding, grain collection, and storage for farmers, and freeing hands of farmers' friends. Maintenance, there are three ways of ...
-
Manufactured by Cleanfix North America Inc.based in CANADA
Keeps hydraulic systems dry, even in the event of leaks! In agricultural machines, numerous functions are performed hydraulically. High-performance seals make these technologies extremely reliable. So it’s frequently troublesome when hydraulic oil needs to be fed to any sort of rotary actuators. Agricultural machines commonly contain variators, for example, for adjusting speed (threshing ...
-
Manufactured by Dover Conveyor, Inc.based in USA
A typical bucket elevator consists of a series of buckets mounted on a chain or conveyor belt moving materials straight up at 90 degrees. This traditional method of conveying is one of the most economical, efficient, and dependable means of elevating loose bulk materials. The initial cost is low; maintenance is minimal; and a long life can be ...
-
Manufactured by Zhengzhou Huaqiang Heavy Industry Technology Co.Ltd.based in CHINA
Bucket elevator vertical conveying granular and powder materials, has the characteristics of small floor area, high lifting height, large conveying capacity, low power ...
-
Manufactured by SCAFCO Grain Systems Companybased in USA
SCAFCO bucket elevators are built strong, reliable, and designed to be fast and efficient for all stages of material handling. SCAFCO guarantees that each system is designed and engineered to meet specific agricultural, commercial, and industrial requirements. SCAFCO bucket elevators have corrosion-resistant G-115 (min. 350 gr/m2 zinc) galvanized coating, giving a durable, long lasting quality ...
-
Manufactured by Valtra Inc. - part of AGCO Corporationbased in FINLAND
When you need more from your tractor, the T Series is the ultimate precision tool with plenty of muscle. Perfect all-round visibility means that you have total control over your land from the comfort of your cab. And by letting technology work for you, you can rest assured knowing every aspect of your workday is handled down to a ...
-
Manufactured by Tube Clamps India Pvt. Ltd.based in INDIA
Specification Of Hydraulic Tube Fittings. BRAND: TU-LOK, STANDARD: DIN 2353/ ISO 8434-1, MATERIAL: MS, CS, SS 304 ,SS 304L , SS 316 ,SS 316L, SS 316TI ( 1.4571) , BRASS , COPPER , DUPLEX , SUPER DUPLEX , INCONEL , MONEL , HASTELLOY , 904L , 6MO, TITANIUM , ALUMNIUM, ALLOY 20, SERIES: LL- LOW PRESSURE , L- MEDIUM PRESSURE, S- HIGH PRESSURE, WORKING PRESSURE: (LOW) LL SERIES - 100 BAR, (MEDIUM)L ...
-
Manufactured by Thomas & Muller Systems Ltd.based in USA
A bucket elevator is a very economical way to elevate material, in both large and small quantities. There are several types and styles of bucket elevators. The selection of type and style depends on the material to be conveyed, its qualities and characteristics, the desired capacity and amount of lift. The selection of the type and style of bucket elevator is all based on the material that is ...
-
Manufactured by bema GmbH Maschinenfabrikbased in GERMANY
Sweepers built from a modular kit: Series 20 with main brush Ø 520 mm. From single to Dual! Depending on budget, application and carrier vehicle the sweeper is configured from the modular system. From the basic machine without a collection container through to the comfortable „Dual“ version with the full range of equipment. Retrofitting at a later date is no problem. The ...
-
Manufactured by IHI STAR Machinery Corporationbased in JAPAN
Width of feed roller (cm) : 32, 40, 50. Number of row : 2 or 3. Tractor required HP kW (PS) : 40.5 – 88 kW (55 – 120PS). STAR forage harvesters have wide cylinder type cutter which chops the corn or sorghum speedy and precisely. Special designed row-crop header with high durability gathering chain enables high-speed working in weedy ...
-
Manufactured by Redexim Charterhousebased in NETHERLANDS
The BLECAVATOR mid range series are of robust construction for long life and are designed with interchangeable hook on attachments to transform stone burying into stonepicking, quickly and easily The heavy duty gearbox and duplex side chain drive are protected by a PTO pre-set cam clutch. An optional seed hopper transforms the BLECAVATOR into a one pass ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you