Only show results in Virginia? Ok

Crop Cultivation Applications

  • Premium

    Determination of cations in feedstuffs, compound feeds, and feed raw materials

    Introduction

    The method is used for the determination of the mass fraction of total inorganic cations (ammonium potassium, sodium, magnesium, calcium) in all types of feedstuffs, compound feeds, fodders, premixes, fodder additives, and feed raw materials (of plant, animal, and mineral origin) by capillary electrophoresis.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of choline (vitamin B4) in feedstuffs, compound feeds, fodder additives, and feed raw materials

    Introduction

    The method is used for the determination of the mass fraction of free choline (synthetic and natural) in feedstuffs by capillary electrophoresis. The method can be applied for all types of feedstuffs, compound feeds, fodders, premixes, fodder additives, and feed raw materials. The present method does not allow the determination of bound choline.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of organic acids in feedstuffs and fodder additives

    Introduction

    The method is used for the determination of the mass concentration of oxalic, formic, fumaric, succinic, malic, citric, acetic, propionic, lactic, benzoic, sorbic, butyric acids in fodder additives and butyric acid in silage and haylage by capillary electrophoresis.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of ascorbic acid and its salts in food additives and fodder additives

    Introduction

    The method is used for the determination of the mass fraction of ascorbic acid and its salts in food additives and fodder additives (feed additives).
    The present method does not allow the determination of ascorbic acid in premixes.
    For the determination of acetic, benzoic, butyric, citric, formic, fumaric, lactic, malic, oxalic, propionic, sorbic, and succinic acids in fodder additives and butyric acid in silage and haylage use the method М...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of lysine and its salts in fodder additives

    Introduction

    The method is used for the determination of the mass fraction of free lysine and its salts (including lysine hydrochloride and lysine sulfate) in fodder additives.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Electrochemical solutions and water technologies for agriculture & livestock

    We engineer and supply innovative technological solutions to improve fruit and vegetable cultivations and animal breeding. Our commitment is to a healthier, safer condition of all the actors involved in the agri-food chain (farmers, plants, animals, consumers) increasing the quantity and quality of food available, while at the same time reducing pesticide contaminations on products and in the environment.

  • Premium

    Determination of macronutrients in fertilizers

    Introduction

    The method is used for the determination of the mass fraction of all primary and secondary nutrients (macronutrients) in fertilizers by capillary electrophoresis. The method allows the determination of such macronutrients as ammonium nitrogen (ammoniacal nitrogen, NH4-N), nitrate nitrogen (NO3-N), phosphorus (P or P2O5), potassium (K or K2O) as well as sodium, magnesium, calcium, sulfur, chlorine (chloride), fluorine (fluoride).

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of methionine hydroxy analogue in fodder additives

    Introduction

    The method is used for the determination of the mass fraction of methionine hydroxy analogue (DL-2-hydroxy-4-(methylthio) butyric acid (HMTBa) and its calcium salt) in fodder additives by capillary electrophoresis.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Microbiological solutions for the agricultural industry

    Our lab is certified and equipped to serve our clients by identifying pathogens from samples obtained from soil, water and plants. A variety of tests can be offered for pathogens detection and pathogen identification in the lab. In addition, our scientists, with training in plant protection, will be available to provide consulting services to our clients for additional support. Our timely support can help you to prevent plant diseases from spreading or happening.

    By Microbe Inotech Laboratories, Inc based in St. Louis, MISSOURI (USA).

  • Premium

    Sampling and drilling equipments for the agriculture industry

    Farmers and researchers in the agricultural industry have used AMS sampling equipment for over 50 years. The AMS Step Probe, Soil Recovery Probes, and a variety of one and two-piece augers are used in the agricultural sampling market to obtaining disturbed samples at or near the surface and for boring to depths where more precise samples can be obtained. AMS now offers a variety of nematode sampling equipment, ATV-mounted PowerProbe rigs, and one and two-piece open-faced augers.

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

  • Premium

    Irrigation water treatment

    Agriculture is by far the largest water use at global level. Irrigation of agricultural lands accounted for 70% of the water used worldwide. In several developing countries, irrigation represents up to 95% of all water uses, and plays a major role in food production and food security. Future agricultural development strategies of most of these countries depend on the possibility to maintain, improve and expand irrigated agriculture.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Continuous emissions monitoring for fertilizer industry

    Process control and emissions monitoring in a fertilizer plant is a challenge due to the high concentrations of HF. To use an extractive system in this environment will demand a lot of maintenance.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Instruments and analyzers for agriculture minimum temperature

    Prediction of minimum temperature and frost damage is a common method and important application in the field of agriculture like outdoors crops growth. In particular the areas where vegetation can be exposed to low temperatures, frost can be disastrous for young plants or fruits. Heat loss measurements inside a greenhouse is a similar application to control the temperature of the crop. When the IR radiation exchange is measured with a pyrgeometer, special screens can be closed when temperature are...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Water treatment solutions for agriculture industry

    The agriculture industry is a water intensive industry that needs a constant contaminant free water supply to ensure high harvest yields and healthy farm livestock. This requires agriculture water treatment solutions and specific soil additives that are sustainable and environmentally friendly. Agriculture water treatment and waste water treatment is essential to prevent bacteria, fungus, while reducing pesticide and nutrient pollution degradation of farmland used in commercial agriculture and horticulture...

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Air filtration and gas purification solutions for post-harvest

    In the current fruit and vegetable market, transporting and warehousing produce for long periods of time is a common practice. Ensuring that the environment in which they are stored is optimal during these periods is critical if damage and spoilage leading to loss of produce is to be avoided.

    By Bioconservacion SA based in Barcelona, SPAIN.

  • Data analysis and visualization tools for agriculture

    Given the large areas and relatively shallow soil depths associated with agriculture, the industry standard has long been two-dimensional analysis. However, over the past decades many of C Tech’s customers have discovered the advantages of analyzing and understanding soil properties on a true 3D volumetric basis. Nutrient concentrations, plant available water and stratigraphy are examples of data which are best addressed on a volumetric basis.

    By C Tech Development Corporation based in Las Vegas, NEVADA (USA).

  • Bird scarer products for crop protection

    • Orchard bird scarer products
    • Cereal crop bird scarer products
    • Vineyards bird scarer products
    • Rice fields bird scarer products
    • Horticulture bird scarer products

    By Gepaval S.L. based in PALS (Girona), SPAIN.

  • Value-Added Services for Agriculture & Rural / Strategic Agriculture Information Services

    Agriculture provides essential societal benefits: supply of food and commodities, economic development and employment. In turn, rural communities are under increasing pressure arising from increased productivity requirements, soil erosion and sealing, water scarcity, natural hazards and climate change.

    By GeoVille Information Systems GmbH based in Innsbruck, AUSTRIA.

  • Industrial shredders for agro/other industry

    For all your processes of reduction of volume, Préciméca proposes the machine adapted to your needs.

    By Precimeca based in Toulouse, FRANCE.

  • Hot Air Dryer for Sweet Potatoes Processing Plant

    Sweet potato roots can be processed into dehydrated forms such as dried chips and flour for storage and uses in food preparations. Sweet potato drying usually performed traditionally with the use of sun, which is a time consuming method (about 56 hours) and produces an inferior quality product with high health risk due to high contamination. The most employed way to reduce the drying time and obtain good quality product is the use of mechanical dryers, and it also lowers the product mass and volume which improves...

    By Azeus Food Machinery based in CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you