Beet Harvesting Equipment For Crop Cultivation In USA
-
Manufactured by Grimme Landmaschinenfabrik GmbH & Co. KGbased in GERMANY
The 6-row defoliator BM 300 / BM 330 developed for the 2-phase process. It chops and removes the beet leaves across the entire machine width. Equipped with a durable steel flail shaft , as well as two non-wear cleaning rubber flail shafts. Optionally, a disc scalper are available which ensures a precise contour guidance. Working widths between 45 cm and 56 cm available for the BM 300 / BM ...
-
Manufactured by Parma Companybased in USA
The Parma Sugarbeet Defoliators come with three models. Models 132, 144, & 180. Each of these models are designed with simplicity for economical defoliating. The triple rotor drum design produces the cleanest beets ready to harvest. The front drum is designed with a time proven steel front flail rotor to shred and destroy even the heaviest 'ropey' tops, allowing for the cleanest harvester ...
-
Manufactured by HOLMER Maschinenbau GmbHbased in GERMANY
The LightTraxx is the ideal solution for extreme conditions. The 6 row sugar beet harvester is super compact, light and manoeuvrable. The Traxx concept offers a unique solution for sugar beet cleaning with its up to six turbines and the CarePlus system – an unbeatable advantage for extremely sticky soil. The automatic steering system AutoSteerPlus and the intuitive operational concept ...
-
Manufactured by Amity Technologybased in USA
The 2300 sugar beet harvester from Amity Technology comes in a scrub tower or wheel design to efficiently harvest your sugar beets. The 2300 can be configured to six or eight rows. The lifting strut is the cornerstone of all Amity harvesters. Engineered to lift whole beets, Amity lifting struts are adjustable to minimize unwanted mud or utilize lighter soils to ensure the root enters the ...
-
Manufactured by H&S Manufacturing, Inc.based in USA
We offer sizes of beet cart models from 20 ton to 35 ton capacity, with various elevator options ranging from 39in to 52in. The H&S beet cart uniquely features an elevator that cleans the beets for tare reduction. Unloading boom may be purchased with a left hand or right hand direction of ...
-
Manufactured by Frans Vervaet B.V.based in NETHERLANDS
Looking for a self-propelled beet harvester which is innovative yet reliable and simple, has an enormous cleaning capacity, and is able to cleanly harvest sugar beet, chicory, fodder beet and celeriac with an even ground pressure? Then the Vervaet Beet Eater Evo is just what you need for an optimum and on-time beet harvest and, because of its high resale value, it's also a cost-effective ...
-
Manufactured by Grimme Landmaschinenfabrik GmbH & Co. KGbased in GERMANY
The 6-row inline-front topper FT 300 with its patented leaf discharge reliably avoids irritating blocking in the scalper area. The machine has been developed for the 1-phase system in combination with the ROOTSTER 604. In addition, this system ensures an optimum distribution of the chopped leaf mass, thus providing the best conditions for a reduced soil cultivation. Flexible row width adjustment ...
-
Manufactured by Doppstadtbased in GERMANY
Sugar beets carry high dry matter yields. They provide higher methane yields per acre than any other crop. Their good fermentation characteristics are of great importance for the production of biogas. The excessive amount of soil residue adhering to the outside of the beets, as a result of harvesting, has to be removed in a suitable cleaning/washing ...
-
Manufactured by Amity Technologybased in USA
The Amity 2720 Harvester offers 31% more capacity and the ability to get through tough harvest conditions. With a larger volume scrub, higher profile chain, Dynamic Chain Management, new ISOBUS controller, new door design with lighted access, and the option for tracks or larger tires, the 2720 puts you in control even when conditions are less than ...
-
Manufactured by Parma Companybased in USA
The simplicity of the Parma 12-row Sugarbeet Harvester sets it apart from the competition with its’ unique design of the grabroll bed. The full-width spiral Grabroll across the back eliminates all bearing hangers or brackets under the Grabrolls reducing trash and mud build-up. ...
-
Manufactured by HOLMER Maschinenbau GmbHbased in GERMANY
The HOLMER Terra Dos T4 is the best beet lifter of all times – no matter whether with two or three axles. This is the reason for the Terra Dos T4‘s modular design. Thus, innovations from practice are directly introduced into all series. In addition, carry-over parts facilitate spare parts management, the uniform operating concept ensures user friendliness and the identical design ...
-
Manufactured by HOLMER Maschinenbau GmbHbased in GERMANY
The pulled sugar beet cleaner loader RRL 200 eco is the easiest and most cost-efficient solution to clean and load sugar beets. The RRL 200 eco is used whenever loading is challenging logistically: Whether in very small loading places, very wide piles or at difficult loading places which are hard to ...
-
Manufactured by Parma Companybased in USA
The Parma Sugarbeet Harvester comes with the 6-Row in its various series. The 2900 Series, rear squeeze chain elevator model is designed for simplicity and high capacity in the heavier yields in the western soils. The six-grabroll (Model 2960) and the eight-grabroll (Model 2980) cleaning bed provide optimum cleaning of the beets without excessive chipping and tail loss. The 2700 Series, rear ...
-
Manufactured by Amity Technologybased in USA
The 2400 sugar beet harvester from Amity Technology comes in a scrub tower design to efficiently harvest your sugar beets. The 2400 can be configured to six or eight rows. The lifting strut is the cornerstone of all Amity harvesters. Engineered to lift whole beets, Amity lifting struts are adjustable to minimize unwanted mud or utilize lighter soils to ensure the root enters the harvester. With ...
-
Manufactured by Grimme Landmaschinenfabrik GmbH & Co. KGbased in GERMANY
Simple and robust, this is the formula for the development of the trailed beet harvester ROOTSTER with 4-ton overloading bunker, which are available as 6-row variant. All machine functions can be conveniently controlled via an operator terminal. All other drives are mechanical and of low-maintenance design. This does not only make it easier to carry out repairs, but also reduces the required ...
-
Manufactured by HOLMER Maschinenbau GmbHbased in GERMANY
2 driven axles. Tank capacity 30 m³. the highest engine power output of all available two-axle beet harvesters. Beet lifting to perfection! This is what the HOLMER Terra Dos T4 has been made for – no matter whether with two or three axles. This is the reason for the Terra Dos T4‘s modular. design: Thus, innovations from years of test and practice are now directly introduced into ...
-
Manufactured by Cross Agricultural Engineering Ltd.based in IRELAND
The Cross Hippo 2 Beet Washer was first designed as a transportable option of the Hippo 1. This machine uses the same hopper and Elevators as the Rhino so not only is it transportable but it also now has double the output of the Hippo1. This machine uses a combination of patented cleaning and chopping elements to ensure that you can deliver a quality clean sample of beet for any application. The ...
-
Manufactured by Amity Technologybased in USA
The 2500 sugar beet harvester from Amity Technology comes in a scrub tower or wheel design to efficiently harvest your sugar beets. The 2500 can be configured to six or eight rows. The lifting strut is the cornerstone of all Amity harvesters. Engineered to lift whole beets, Amity lifting struts are adjustable to minimize unwanted mud or utilize lighter soils to ensure the root enters the ...
-
Manufactured by Frans Vervaet B.V.based in NETHERLANDS
Vervaet is a family business that started in 1974 by building self-propelled beet harvesters. The first Hydro Trikes were developed in 1989. Currently, more than 180 people work for Vervaet, making sure that clients from all over the world get their Q616, Q621 and their Beet Eaters 625 and 925 on time. The production of these machines takes place between February and September while the rest of ...
-
Manufactured by HOLMER Maschinenbau GmbHbased in GERMANY
The Terra Felis 3 evo is the most modern beet cleaner loader in the world. The Terra Felis has already proven itself internationally for 10 years, and has since been setting standards in gentle and efficient beet-loading – as the pick-up that has been developed and patented by HOLMER proves. HOLMER DynaFill for the automatic loading of trucks, the largest cab or the fastest automatic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you