Crop Harvesting Equipment For Crop Cultivation Available In Jamaica
-
PremiumManufactured by Zeltex LLCbased in USA
EvoNIR 4.0 Analyzer with ISOBUS protocol can be connected to any virtual terminal with built-in ISOBUS task controller and can be installed on forage harvesters, combines, balers, forage wagons, slurry tankers, compactors, feed mixers and portable in a carrying ...
-
Manufactured by Kongskilde Agriculturebased in DENMARK
Upper Cut, low fuel consumption. New reinforced cutting drum, higher capacity with the same input. Wide feed intake, better flow and thus higher capacity. New control box, higher comfort and easy to operate. Pro-Tec clutch protection, reduced impact on the ...
-
Manufactured by SAME DEUTZ-FAHR - SDF Groupbased in USA
Our goal is to develop machines that will give a boost to the profitability of your company. High output is a key success factor for every large square baler. DEUTZ-FAHR BigMaster baling presses feature several unique points that will provide the capacity your company requires. The ability to produce top quality bales in all crop conditions sets DEUTZ-FAHR BigMaster baling presses apart from all ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The Flexxifinger® Heavy Duty Crop Lifter™ is for harvesting a variety of different crops including pulses, cereals, rice, oils, forage and other specialty crops. The lifter rail hugs the guard and the replaceable nylon finger is held by an adjustable receptor, allowing the combine operator to fine-tune the location of the lifter’s forward lifting point for his specific conditions. ...
-
Manufactured by Soaplast srlbased in ITALY
The DUALDRIP integral dripline is an important technological achievement in the drip irrigation sector. It is the first flat drip line with bilateral delivery on each integrated dripper. It is a polyethylene pipe with a flat turbulent flow dripper, welded to the wall of the double delivery ...
-
Manufactured by Westtech Maschinenbau GmbHbased in AUSTRIA
The root stock device for ground-flush cutting and preparation of root ...
-
Manufactured by Pellenc SAbased in FRANCE
Grape-by-grape computer-vision sorting removes the unwanted material from the harvest: green waste, foreign bodies, and unripe or unhealthy ...
-
Manufactured by Shuliy Machinery Co. Ltd.based in CHINA
First, both ears of corn can be harvested and corn stalks can be chopped to achieve the purpose of returning straw to the field. 2. The unit is energy-saving and can be easily operated with only 18-32 horsepower. Third, one machine is multi-purpose, light and flexible. This unit is used in combination with small tractors, and other operations can be performed by removing the unit tractor. ...
-
Manufactured by Weiler Forestrybased in USA
The Weiler B457 track feller buncher models have the latest Cat® C9.3 engine that produces 298 hp (222 kw) and meets U.S. EPA Tier 4 Final emission standards. A Tier 3 engine option is also available. The B457 is a non-leveling model best suited for plantation thinning, biomass harvesting, and medium-production select or clear-cut applications; The B457 provide a leading combination ...
-
Manufactured by LS Systems Limitedbased in UNITED KINGDOM
Function of SW7 SW7 is a silicon based wetter designed to give enhanced coverage and consequent uptake of foliar nutrients. The silicon-oxygen bonds are hydrophobic and the organic clusters are hydrophilic, creating a superior wetting agent, which spreads quickly to cover a large surface areagreater than conventional surfactants. At higher application rates, microscopic examination reveals a high ...
-
Manufactured by MacDon Industries Ltd.based in USA
The MacDon FD75 FlexDraper® is our latest innovation in FlexDraper technology. Even at maximum flex our fixed reel to cutter bar relationship stays true, maintaining a consistently small critical gap between the reel fingers and cutter bar. This close reel to cutter bar relationship results in smooth, consistent, heads-first feeding that significantly boosts combine productivity. That means ...
-
Manufactured by SP Maskiner ABbased in SWEDEN
The SP 561 LF is a high-performance all-round harvester head. It is designed according to the LF principle for maximum productivity. The SP 561 LF is specifically designed for varied jobs and offers very good characteristics all the way from first thinning to medium final cut. The compact measurements in combination with a perfect delimbing down to 30mm make sure that the first thinning can be ...
-
Manufactured by BioAtlantis Ltdbased in IRELAND
LamVita: Apply at critical stages in vines & pod bearing ...
-
Manufactured by Elektronikbased in SERBIA
Conveyor belts are design to be assembled on tractor trailer and to be driven by tractor’s hydraulic pump. Height of conveyors is 1m and it is suitable for harvesting different types of vegetables (paprika, broccoli, cauliflower…). Harvested products are being transported to box pallet on the trailer. When the box pallets are full, structure rests on the ground, lifts and the ...
-
Manufactured by Ken-Barbased in USA
Black plastic mulch modifies the micro-climate around plants, enhancing the growth, yield, and quality of horticultural crops. Used in experiments and field production since the late 1950's, black plastic mulch has proven to boost agricultural ...
-
Manufactured by DASMESH Mechanical Works Pvt. Ltdbased in INDIA
DASMESH Tractor Driven Combine Harvesters (also known as TDC Harvesters) are superior harvesting machines that are enabled to perform in tough geographical conditions. DASMESH combine harvesters are known for their remarkable combination of strength, style, performance and efficiency, regardless of terrain or crop conditions. DASMESH combine harvesters are the culmination of high quality raw ...
-
Manufactured by JAGODA JPS Agromachinesbased in POLAND
The berry harvester OSKAR A01 is the latest version of the harvester designed to collect berries on plantations prepared for mechanical harvest from the full row such as blackcurrants, redcurrants, and white-currants, Aronia (chokeberries), gooseberries, Haskap (honeyberries), autumn-fruiting raspberries, saskatoon berries and rose ...
-
Manufactured by AKYUREK Kardesler Ltdbased in TURKEY
For the grading by specific weight of products with very slight difference in size and/or weight, which can not be separated by screening (width), aspiration (weight) or by indented cylinders ...
-
Manufactured by AGCO Corporationbased in USA
Continuous feed and uniform cutting even in difficult conditions.Large -diameter auger: thanks to a large-diameter auger with larger flighting, it allows for increased and improved feeding capacity.Open-profile frame: provides better visibility (facilitating crop flow control) and improves the handling of long-stemmed crops. The frame is designed to simplify hitching and unhitching the cutting ...
-
Distributed by Koat BVbased in NETHERLANDS
Electropuller with or without induction option. Full automatical or manual transport of traditional harvesting trolleys. Internal ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you