Crop Lifter (Crop Harvesting) Equipment
-
Manufactured by Dutch Industriesbased in CANADA
Crop Lifters that will Improve Speed & Accelerate Harvest With Minimal Cost! Consistent and uniform comb-like action goes to ground level seeds and lifts for faster and easier cutting action, giving you less crop loss. It’s bullet-shaped holder slides over the tip of the guard and is easily bolted into place using the existing guard ...
-
Manufactured by Fix Enterprisesbased in AUSTRALIA
through the life of the crop. Do not let seasonal or weather pressures influence you in to premature sowing. Many crops have been overtaken by weeds, with poor harvests or total loss the ...
-
Manufactured by Gaterman Manufacturing Co., Incbased in USA
This installation kit contains a specially modified adjustment block (C block) and the required hardware to allow the use of the popular 8B crop lifter on Schumacher SCH Easy Cut II cutterbars equipped with 132mm and 147mm sickle guards used on various cutting platforms. The kit is a direct, bolt-on replacement for new and existing 8B crop ...
-
Manufactured by Gaterman Manufacturing Co., Incbased in USA
The 4S is a fully adjustable crop lifter (also known as pick up guard) designed to fit combine floating cutterbars with 1½" cut stub guards. It is equipped with a set screw height adjustment, non-clogging spring action joint, and is double-bolted to the cutterbar. 4S crop lifters are constructed of ductile iron for ...
-
Manufactured by Gaterman Manufacturing Co., Incbased in USA
This installation kit contains a specially modified adjustment block (C block) and the required hardware to allow the use of the popular 8B crop lifter on the John Deere 600 series flex head grain platforms (620F, 622F, 622R, 625F, 625R, 630F, 630R, 635F, 635FD, 640FD). The kit is a direct, bolt-on replacement for new and existing 8B crop ...
-
Manufactured by Gaterman Manufacturing Co., Incbased in USA
The 4H crop lifter (also known as pick up guard) fits windrowers and pea harvesters, as well as selected floating cutterbars used on combines. This sturdy ductile iron crop lifter is equipped with a set screw height adjustment and non-clogging spring action joint. It comes equipped with yellow zinc plated grade 8 ...
-
Manufactured by Gaterman Manufacturing Co., Incbased in USA
The 4B is a rugged, non-adjustable crop lifter (also known as pick up guard) used in demanding low cutting applications. It features spring loaded action and a nested receiver pocket for the sickle guard providing the ultimate in solid mounting. The 4B crop lifter is constructed of high strength ductile iron for durability and ...
-
Manufactured by Amadas Industriesbased in USA
The Amadas Crop Lifter / Conditioner brings an innovative new concept to lifting and conditioning peanuts and other crops. The gentle action of our advanced design allows the windrows to be lifted and replaced without destroying the ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The Flexxifinger® Pulse Crop Lifter™ was originally designed for straight combining in desiccated crops like peas, lentils and edible beans where cutting close to the ground is required. The lifter rail hugs the guard and the replaceable nylon finger is held in an adjustable receptor, allowing the combine operator to ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The FlexxiFloat™ 100 crop lifter combines the flexibility of the FlexxiFloat™ series with the gentle lift of a nylon finger. The spring pivot attached to the rail allows the lifter to flex in varying ground conditions, while the nylon finger provides a gentle lift to the crop. The lifter and finger ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The FlexxiFloat™ crop lifter series have a spring-pivot which allows the lifter to follow the fluctuations of the ground, making it ideal for uneven ground conditions. The FlexxiFloat™ system is available with two rail options: the standard rail and the high-pivot rail. The standard rail is generally used with a rigid header, ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The FlexxiFloat™ crop lifter series have a spring-pivot which allows the lifter to follow the fluctuations of the ground, making it ideal for uneven ground conditions. The FlexxiFloat™ system is available with two rail options: the standard rail and the high-pivot rail. The standard rail is generally used with a rigid header, ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The Flexxifinger® Heavy Duty Crop Lifter™ is for harvesting a variety of different crops including pulses, cereals, rice, oils, forage and other specialty crops. The lifter rail hugs the guard and the replaceable nylon finger is held by an adjustable receptor, allowing the combine operator to fine-tune ...
-
Manufactured by Gaterman Manufacturing Co., Incbased in USA
The 8A is a fully adjustable crop lifter (also known as pick up guard) used on all windrowers and combines with fixed, floating, or flexible cutterbars that tilt downward. The 8A crop lifter is constructed of high strength ductile iron for durability and long service life. Plated grade 8 fasteners are used for high strength and ...
-
Distributed by Industriehof Scherenbostel / Heinrich Rodenbostel GmbHbased in GERMANY
Beet Lifter Shares, Row Cutter Hooks, Crops ...
-
Distributed by Huber Ag Equipment Ltdbased in CANADA
Huber Ag Equipment is a dealer for E-Kay Enterprises. E-Kay Enterprises are a quality manufacturer of Augers, Auger Accessories, Crop Dividers, Crop ...
-
Manufactured by Abrey & Son Limitedbased in UNITED KINGDOM
for any wheels sinking into the field. Hydraulically adjusted header angle places the cutter bar under the laid material eliminating the need for crop lifters in most cases.Crop Ranger VX HIghline is available in 8.5 and 9.0m widths for all leading combine ...
-
Manufactured by CLAAS Groupbased in GERMANY
TANGENTIAL AXIAL FLOW (TAF) is unequalled for harvesting versatility - wheat, rice, maize, basmati, sunflowers, soybeans, chickpeas, mustard, mung beans, pigeon peas, etc. TATA engine (BS-III emissions standard) with 76 HP and plenty of torque in reserve. Available in 2.60 m cutterbar and 3.20 m cutterbar with crop lifters. Long service ...
-
Manufactured by Key Dollar Cab, LLCbased in USA
Tapered Width (28" at top) Optimized Shape for Minimal Crop Impact. Options Limb Lifters, Fenders & ...
-
Manufactured by Key Dollar Cab, LLCbased in USA
Height (w/ 16.9R24 R1 Tires). Narrow, Tapered Width (28" at Top). Sleek Shape to Minimize Crop Damage. Options Limb Lifters, Fenders & ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you