Oilseed (Crop Harvesting) Equipment
-
Manufactured by Venus Impexbased in INDIA
Glyphosate is an non-selective systemic herbicide, absorbed by the foliage, with rapid translocation throughout the plant. In activated on contact with soil. It is control of annual and perennial grasses and broad leaved weeds, pre- harvest, post-planting / pre-emergence and in stubble, in cereals, peas, beans, oilseed ...
-
Manufactured by ECOSFARM(Guangzhou) Bio-Technologies Co., ltdbased in CHINA
Non-selective systemic herbicide absorbed by the foliage, with rapid translocation throughout the plant and inactivated on contact with soil. Control of annual and perennial grasses and broad-leaved weeds, pre-harvest, in cereals, peas, beans, oilseed rape, flax, mustard, stubble and post-planting/pre-emergence of many crops; as a directed ...
-
Manufactured by Gaterman Manufacturing Co., Incbased in USA
The 4S is a fully adjustable crop lifter (also known as pick up guard) designed to fit combine floating cutterbars with 1½" cut stub guards. It is equipped with a set screw height adjustment, non-clogging spring action joint, and is double-bolted to the cutterbar. 4S crop lifters are constructed of ductile iron for strength and durability. They are equipped with high strength yellow ...
-
Manufactured by Gaterman Manufacturing Co., Incbased in USA
The 4H crop lifter (also known as pick up guard) fits windrowers and pea harvesters, as well as selected floating cutterbars used on combines. This sturdy ductile iron crop lifter is equipped with a set screw height adjustment and non-clogging spring action joint. It comes equipped with yellow zinc plated grade 8 ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The FlexxiFloat™ 100 crop lifter combines the flexibility of the FlexxiFloat™ series with the gentle lift of a nylon finger. The spring pivot attached to the rail allows the lifter to flex in varying ground conditions, while the nylon finger provides a gentle lift to the crop. The lifter and finger can be paired with the optional 20250 shoe to add increased wear on the tip of the ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The Flexxifinger® Heavy Duty Crop Lifter™ is for harvesting a variety of different crops including pulses, cereals, rice, oils, forage and other specialty crops. The lifter rail hugs the guard and the replaceable nylon finger is held by an adjustable receptor, allowing the combine operator to fine-tune the location of the lifter’s forward lifting point for his specific conditions. ...
-
Manufactured by AGCO Corporationbased in USA
The “L” cutting table is fundamental to a productive harvest, since even the most difficult crops are fed into the machine with ease. Thanks to the versatile pick up reel, the exclusive Schumacher system and the large-diameter auger with retractable fingers, the cutting table can pick up any crop, in any condition and feed it to the threshing components at a constant and even rate. ...
-
Manufactured by KEMPER GmbH & Co. KGbased in GERMANY
The 460pro harvesting header with four big gatherer drums and two intake drums is a sturdily built, no-nonsense machine. With its working width of 6.0 metres it fits perfectly into the KEMPER product range. When harvesting maize over 4.0 metres, the 460pro shows its real ability. The big gatherer drums ensure almost loss free feeding. Plants take a direct path towards the feed rolls of the ...
-
Manufactured by KEMPER GmbH & Co. KGbased in GERMANY
The proven header for harvesting thin-stemmed crops. The simple, practical design of the rotary intake system, consisting of four intake and two transport drums, ensure that service and maintenance work is kept to a ...
-
Manufactured by Fowler Westrup (India) Pvt. Ltdbased in INDIA
The Pre-Cleaner Type SAB is intended to master the pre-cleaning problems at intake plants. The SAB is also ideal to dress malting barley and milling grain to the highest quality commercial sample at a reduced throughput. The machine is constructed of steel with sieve boat made of laminated ...
-
Manufactured by AGCO Corporationbased in USA
Continuous feed and uniform cutting even in difficult conditions.Large -diameter auger: thanks to a large-diameter auger with larger flighting, it allows for increased and improved feeding capacity.Open-profile frame: provides better visibility (facilitating crop flow control) and improves the handling of long-stemmed crops. The frame is designed to simplify hitching and unhitching the cutting ...
-
Manufactured by Shivvers Manufacturing, Inc.based in USA
The COMPUDRY Command Center constantly monitors conditions such as grain moisture, grain temperature, and plenum temperature, while also controlling all components of the system. Designed with the operator in mind, it is easy to use with fingertip control of your entire drying process. Make your initial settings to the Command Center, concentrate on harvesting your crop, and keep grain in the ...
-
Manufactured by Kverneland Groupbased in NORWAY
Kverneland re-introduces the trailed cultivator Kverneland Turbo in working width of 6.5m and 8m. The Kverneland Turbo has been designed with 5 rows of tines for all kind of soil cultivation: stubble cultivation after harvesting from 3cm to 15cm, seedbed preparation after ploughing and also shallow working in spring or 2nd stubble cultivation after manure/slurry and after green fertiliser ...
-
Manufactured by Zhengzhou Dayang Oil Chemical Equipment Co.,Ltd.based in CHINA
Soybean oil extraction production lines generally use various methods such as pressing and extraction to obtain crude oil with more impurities, and then refined to obtain edible refined ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The FlexxiFloat™ crop lifter series have a spring-pivot which allows the lifter to follow the fluctuations of the ground, making it ideal for uneven ground conditions. The FlexxiFloat™ system is available with two rail options: the standard rail and the high-pivot rail. The standard rail is generally used with a rigid header, while the high-pivot rail is used with a flex header, ...
-
Manufactured by 20 Microns Mineral FertIizerbased in INDIA
Sooner or later, everyone wants to get the most of their veggie gardens. And that comes with smart feeding. Fortunately, Minfert|Blk liquid is an invaluable trendy juice for every home gardener. It’s like plants on organic steroids for faster ...
-
Manufactured by Kotzur Pty. Ltdbased in AUSTRALIA
The Kotzur drying silo uses a specially developed and patented drying cone/plenum. The air is forced into this plenum and then passes through the grain mass. Different drying silo models, fan combinations and grain have varying specifications, however the typical airflow is 15-20 litres per second per tonne of grain or a complete change of air in the silo each 25-50 seconds. This airflow is 10-15 ...
-
Manufactured by BioAtlantis Ltdbased in IRELAND
LamVita: Apply at critical stages in vines & pod bearing ...
-
Manufactured by AGCO Corporationbased in USA
The cutting header ensures a consistent head first feed of material of all crop types through the innovation of the powered belt system, for greater threshing ...
-
Distributed by Sunova Implement Ltd.based in CANADA
KEMPER rotary crop headers offer uncompromising clear cut across the full working width and the safe crop guidance means that all plants are only cut once. There will be no double cut. This proven technology for over more than 20 years allows the universal use e.g. in broadcast sown crops, dual rows and rows with different widths with different crops such as sorghum, sunflower, rape seed, whole ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you