Crop Harvesting Equipment For Crop Cultivation In Switzerland
-
Manufactured by AGCO Corporationbased in USA
Continuous feed and uniform cutting even in difficult conditions.Large -diameter auger: thanks to a large-diameter auger with larger flighting, it allows for increased and improved feeding capacity.Open-profile frame: provides better visibility (facilitating crop flow control) and improves the handling of long-stemmed crops. The frame is designed to simplify hitching and unhitching the cutting ...
-
by Syngentabased in SWITZERLAND
DURIVO is innovation in performance and convenience. DURIVO offers growers performance and convenience in the production of healthier crops and harvest. The DURIVO product line is a range of diamide chemistry based broad spectrum insecticides that perform with less sprays needed, and helps to deliver improved ...
-
Manufactured by AGCO Corporationbased in USA
The “L” cutting table is fundamental to a productive harvest, since even the most difficult crops are fed into the machine with ease. Thanks to the versatile pick up reel, the exclusive Schumacher system and the large-diameter auger with retractable fingers, the cutting table can pick up any crop, in any condition and feed it to the threshing components at a constant and even rate. ...
-
Manufactured by AGCO Corporationbased in USA
The cutting header ensures a consistent head first feed of material of all crop types through the innovation of the powered belt system, for greater threshing ...
-
Manufactured by Rapid Holding AGbased in SWITZERLAND
The low machine centre of gravity and axle far in the back make it ideal for mowing even extremely steep hillsides. The machine balance guarantees a high bar bearing weight without additional weights. The new Rapid soft handlebar bearing, adjustable active steering types and the laterally swivelling handlebar allow maximum efficiency and high ...
-
Manufactured by Rapid Holding AGbased in SWITZERLAND
The low machine centre of gravity and axle far in the back make it ideal for mowing even extremely steep hillsides. The machine balance guarantees a high bar bearing weight without additional weights. The new Rapid soft handlebar bearing, adjustable active steering types and the laterally swivelling handlebar allow maximum efficiency and high ...
-
Manufactured by Rapid Holding AGbased in SWITZERLAND
The low machine centre of gravity and axle far in the back make it ideal for mowing even extremely steep hillsides. The machine balance guarantees a high bar bearing weight without additional weights. The new Rapid soft handlebar bearing, adjustable active steering types and the laterally swivelling handlebar allow maximum efficiency and high ...
-
Manufactured by Irriga System SAbased in SWITZERLAND
Irriga System provides an irrigation management service by recommending the water depth to be applied on each cropped field during the entire crop season. The criteria for when to irrigate and how much water to apply are based on the specific crop agronomic parameters, soil characteristics, weather conditions (measured and forecasted) and irrigation system. Mathematical models simulate the soil ...
-
by Insolightbased in SWITZERLAND
insolagrin is an innovative agrivoltaic solution, where translucent solar modules replace the plastic tunnels usually used in agriculture. It allows to produce solar energy and protect crops, enabling dual use of land. More than a solar installation, insolagrin is thus a new tool for farmers. The light transmission control allows farmers to optimise crop growth over seasons and climate changes. ...
-
Manufactured by Rapid Holding AGbased in SWITZERLAND
The powerful Rapid VAREA is designed for varying types of work. Thanks to the handlebar which can be swivelled and rotated to the side, work is even easy to carry out around obstacles. The Rapid Soft handlebar bearing provides the operator with maximum comfort and therefore also non-tiring and light work, even for long ...
-
Manufactured by Rapid Holding AGbased in SWITZERLAND
The low machine centre of gravity and axle far in the back make it ideal for mowing even extremely steep hillsides. The machine balance guarantees a high bar bearing weight without additional weights. The new Rapid soft handlebar bearing, adjustable active steering types and the laterally swivelling handlebar allow maximum efficiency and high ...
-
Manufactured by Rapid Holding AGbased in SWITZERLAND
Rapid finger cutter bars are characterised by exact cutting and finger spacing that can be adapted to different forage and ground conditions. Outer shoes and side cutting mechanisms are available for the different bar ...
-
Manufactured by Rapid Holding AGbased in SWITZERLAND
The low machine centre of gravity and axle far in the back make it ideal for mowing even extremely steep hillsides. The machine balance guarantees a high bar bearing weight without additional weights. The new Rapid soft handlebar bearing, adjustable active steering types and the laterally swivelling handlebar allow maximum efficiency and high ...
-
Manufactured by Rottne Industri ABbased in SWEDEN
Rottne H11D in 6 and 8-wheel designs, is an articulated-steered harvester for thinning and final felling. Powerful engine, hydrostatic transmission and articulated frame joint in the centre give Rottne H11D excellent off-road performance and precise ...
-
Manufactured by HSM Hohenloher Spezial-Maschinenbau GmbH & Co. KGbased in GERMANY
At first glance, there is not much to distinguish the 405H1 HSM harvester from its big brother, the H2. Why move away from a tried and tested configuration? On closer inspection, however, the 405H1 reveals itself to be an effective harvester for thinning forests with thin to medium trunk trees. Its profile, tailored to maximum performance, is characterised by the highly productive and lightweight ...
-
Manufactured by HSM Hohenloher Spezial-Maschinenbau GmbH & Co. KGbased in GERMANY
An "all-rounder" is one way of describing the HSM 405H2. An above-average machine for forestry management work. The concept of the H2 is growing in popularity. With the production of this harvester, HSM covers the demand from medium to thick trunk timber operations. This is backed up by performance figures. Whether it is the L220 crane from Loglift with 10m reach, 175 kN pulling force, 700/50 ...
-
Manufactured by Logset Oybased in FINLAND
The Logset TH45 is built to achieve optimum results in thinning operations. Logset TH45 is compact and lightweight, enabling smooth and quick operation even in dense forests. The head is designed for processing small to medium-sized trees. It is equipped with two hydraulic feeding wheels and a support wheel to reduce friction and improve feeding. The hydraulics has been optimized ...
-
Manufactured by Logset Oybased in FINLAND
The Logset 8H GTE Hybrid is a powerful medium-sized harvester that doesn’t slow down under pressure. The machine´s diesel engine runs at a constant pace, while the hybrid system provides up to 104 kW (142 hp) of additional power required in a typical felling and processing cycle. This allows the hybrid harvester to easily perform several tasks at the same time, while keeping the ...
-
Manufactured by Logset Oybased in FINLAND
The Logset TH65 is a versatile head built for thinning and final felling on all types of sites. It is compact for early thinning operations, yet powerful enough to fell trees up to 65 cm. Optimal productivity is achieved with diameters up to 45 cm. The head is well matched with the Logset 8H GT harvester. The Logset TH65 has all the power, yet is not heavy, which makes it perfect for ...
-
Manufactured by HSM Hohenloher Spezial-Maschinenbau GmbH & Co. KGbased in GERMANY
At first glance, there is not much to distinguish the 405H1 HSM harvester from its big brother, the H2. Why move away from a tried and tested configuration? On closer inspection, however, the 405H1 reveals itself to be an effective harvester for thinning forests with thin to medium trunk trees. Its profile, tailored to maximum performance, is characterised by the highly productive and lightweight ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you