Only show results in Massachusetts? Ok

Hay Growing equipment for Crop Cultivation

  • M&W - Wheel Rakes

    The full line of M&W® wheel rakes is designed to offer a gentle, ground-driven solution for your hay raking needs. With maximum working widths ranging from 3'10' to 33'5', there is a M&W rake to fit most applications. There are six models of rakes available in a total of twenty different sizes. Spring-steel finger wheels are used on ...

    By Waynes Farm Machinery based in Taylorsville, KENTUCKY (USA).

  • AG Shield - Model ReCon 400 - Hay Reconditioner

    This revolutionary ReCon reduces swath drying time like no ReCon or hay reconditioner has in the past!

    By AG Shield Manufacturing based in Benito, MANITOBA (CANADA).

  • Trailblazer - Model PTO - Pitmanless Double Bar Trail Mower

    Kosch Company offers two models of theTrailblazer pitmanless double bar mower.TheMDP16has a 9-foot front sickle bar with a trailing 7-foot sickle bar. The MDP18has two 9-foot bars.

    By Kosch Company based in Columbus, NEBRASKA (USA).

  • Agrozenit - Model ZNTRM135 - Drum Mower 135 cm

    Hay Equipment - Drum Mower 135 cm - Agrozenit Turkey

    By Agrozenit Agricultural Equipment based in Selcuklu / Konya, TURKEY.

  • McFarlane Harrows - Chain Link Harrows

    Chain Link Harrows The chain link harrow with pull-type drawbar is an excellent cultivation and incorporation tool. Fully flexible spring-steel harrow cultivates, smoothes, and provides superior herbicide incorporation. The chain link sections scarify hay and pasture land to stimulate new growth and better moisture penetration. The non-tracking, ...

    By Tri Green Tractor based in Frankfort, INDIANA (USA).

  • Hay Storage

    This hay hood keeps the hay door below dry while hay is being loaded. The cupola on top ensures moisture from the hay can vent to the outside. A traditional, wooden hay barn is a familiar sight, but most hay grown in Washington does not stay in Washington. Washington supplies the world with hay and straw. Hay must be protected from moisture. A ...

    By Washivore based in Olympia, WASHINGTON (USA).

  • Model 18, 20, 22, & 24 - Dump Grain Truck

    Hydraulic Gate. Optional Tarp. Heavy Gauge Sheet Metal on Sides and Floor. Three Grain Gates on End Gate (Pictured Below)

    By West Point Design, Inc. based in West Point, NEBRASKA (USA).

  • Rowse - Ultimate V-Rake

    Rowse has taken the features of its previous V-Rake Models and has designed the Ultimate V-Rake that is more maneuverable, more flexible, and gets more hay into the windrow. 

    By Rowse Hydraulic Rakes Company based in Burwell, NEBRASKA (USA).

  • Model OT - 09 - Rotary Windrower

    Ot-09 the rotary windrower includes these  hay rakes, which are very strong,precise and easy to use by guaranteeing the perfect result in treating fodder

    By Baran Tarim Makine San. Ve Tic. Ltd.Sti. based in Şehitkamil, TURKEY.

  • Bale King - Model VR - Wheel Rakes

    Cover more ground in less time with the Bale King VR series wheel rakes by Bridgeview. Handle large volumes of hay at high speed.  The large 62″ diameter wheels and patented wheel spring design ensure smooth travel and more complete accumulation of cut material. Our heavy duty design includes 5″ X 5″ structural tubing, wrap ...

    By Flannery Hay Equipment based in Atkinson, NEBRASKA (USA).

  • Valtra - Model N Series - Tractors

    The new Valtra N Series drives like a small tractor, but works like a big one. It features the most powerful engine in its class, yet the handling is agile enough for more delicate work. And with longer service intervals and lower fuel consumption, the total cost of ownership is kept to a minimum.

    By Valtra Inc. - part of AGCO Corporation based in Suolahti, FINLAND.

  • Hay Saver Feeder

    Our feeder is hard to beat! The Best Haysaver is made from 2-inch, 12 and 14-gauge galvanized tube attached to a corrosion-proof OTR tire. The steel is saddle-notched and welded in one piece with no bolt-together panels, making it super-sturdy.  All welds are painted with 97% zinc paint. Since the bottom doesn’t rot away, the Best ...

    By Best Livestock Equipment based in Georgetown, KENTUCKY (USA).

  • WIC - Total Mixed Ration Feeders

    Produce total mixed ration with silage, hay and feed. Electronic scale insuring precise mixed ration. Easy top loading of the ingredient. Fast uniform blend within 2 to 5 minutes. Mixing mechanism made with chains and steel paddles. 9 or 11 HP gasoline motor available.

    By WIC based in Wickham, QUEBEC (CANADA).

  • Hay Bale Feeder

    Applegate's Hay Feeders are known for superior strength & longevity.  This 2 piece Bale Feeder is 8' in diameter & 46' tall with a bottom panel to help with waste.  It has 1 1/4' diagonal & vertical bars & hardware to connect the two sides is included.  The feeder comes in a red Ultra-protected powder coated paint.

    By Zeitlow Distributing Company based in McPherson, KANSAS (USA).

  • Ag Flat

    Wesco’s Ag Flat is an outside-frame trailer perfect for carrying bins in and out of the orchard or field.  The Ag Flat differs from the Wesco Hay Flat in the position of the frame rails.  Its two 4mm x 13-inch Domex main frame rails are placed along the sides of the trailer, with 3-inch I-beams running the full width of the ...

    By WESCO Trailer Manufacturing - Orchard Machinery Corporation based in Yuba City, CALIFORNIA (USA).

  • Chain Sprockets, Scraper Floor Rails, Thrust Members

    Chain Sprockets, Scraper Floor Rails, Thrust Members.

  • GrassWorks - Flex Unit Weed Wiper

    The GrassWorks Flex Unit Weed Wiper  is built in sizes ranging from 20 feet to 50 feet. We can custom build any size unit to fit your operation. We feel our GrassWorks Flex Unit Weed Wiper is an extremely efficient and economical tool for any operation that has weed problems.

    By GrassWorks Manufacturing, LLC based in Strafford, MISSOURI (USA).

  • HoneyBee - Rice Belt Header

    The Honey Bee Rice Belt Header speeds harvest with features that allow it to hug the ground for faster, easier harvests eliminating the twisting and tangling problems associated with conventional auger headers. Using drapers and a unique feeding auger, The Honey Bee Rice Belt Header uniformly feeds the crop heads first into the combine providing ...

    By Honey Bee Manufacturing Ltd. based in Frontier, SASKATCHEWAN (CANADA).

  • TracPacker - Model 2W-1003 - Tractors

    This is the model that started it all!  This base unit will fit a wide variety of tractors (see listing at right). The disk gangs move the displaced soil back to the track where it is packed twice into the bottom of the track. This key function gets more soil packed back in to the track and allows the refilled track to remain more stable ...

    By TracPacker based in Battle Creek, NEBRASKA (USA).

  • Kosch - Model MDP - Hydraulic Double Bar Trail Mower

    Kosch Company offers two models of theTrailblazer Hydro pitmanless double bar mower.TheMDP.HYD.16has a 9-foot front sickle bar with a trailing 7-foot sickle bar. TheMDP.HYD.18has two 9-foot bars.

    By Kosch Company based in Columbus, NEBRASKA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you