Plant Science Equipment For Crop Cultivation In Taiwan
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Stomatal aperture is the dominant factor in the diffusion conductance of leaf surfaces, which controls both the water loss from plant leaves and the uptake of CO2 for photosynthesis. Measurements of diffusion conductance are therefore important indicators of plant water status and provide a valuable insight into plant growth and plant adaptation to environmental ...
-
Manufactured by PlantSensors.combased in AUSTRALIA
The whole system is schematised in the picture above (click on the image and then maximize the window view to get a better view). It includes sensor probes, heat-averaging tubes, 4-cores data cable, power supply unit, datalogger and external battery or solar panel. The Granier sap flow sensor includes two probes inserted in the stem with one probe 10-15cm above the other.The upper probe is heated ...
-
Manufactured by PlantSensors.combased in AUSTRALIA
Constant current power supply unit has several advantages over the commonly used unit with constant voltage (see Lu et al 2004). Each PS-PS12 unit can supply constant current to up to 12 PS-GP-30 ...
-
Manufactured by Jauntering International Corporationbased in TAIWAN
The 3666 Leaf Wetness Sensor is used to measure leaf wetness with its grid-like, resistance-based sensor, which is ranging from 0 ( dry ) – 15 ( wet ). This sensor is a circuit board with interlacing gold-plated fingers. Condensation on the sensor lowers the resistance between the fingers, which is measured by a datalogger including HL20 or HL10 or DT12 datalogger series or other brand, etc. Gold ...
-
Manufactured by PlantSensors.combased in AUSTRALIA
We also provide the fully pre-wired complete Granier sap flow measuring system including logger, probes, cables, power supply units and solar panel ...
-
Manufactured by PlantSensors.combased in AUSTRALIA
Authentic Granier TDP sap flow sensor (3.5cm long probe with 2cm sensing part ) Long probe sensors are also available: PS-GP5x2 Granier TDP sap flow sensor (5cm long probe with 2cm sensing part) PS-GP9x2 Granier TDP sap flow sensor (9cm long probe with 2cm sensing part) Longer sensors could be ordered specifically. ...
-
Manufactured by PlantSensors.combased in AUSTRALIA
Truly Granier's original design (Granier 1985), the PlantSensors probes can be directly hooked up to a data ...
-
Manufactured by PlantSensors.combased in AUSTRALIA
Directly measure 14 PS-GP sensors. can measure 6 more sensors than the PS-TDP8 system; need an extra PS-PS12 power supply ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The SunScan Canopy Analysis System uses field measurements of Photosynthetically Active Radiation (PAR) in crop canopies to provide valuable information about Leaf Area Index (LAI) and biomass production. The SunScan canopy analyser is optimised for low regular canopies such as most agricultural crops. The 1m probe enables rapid spatial averaging of large areas and PAR mapping for non-uniform ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The recently upgraded WinDIAS 3 Leaf Image Analysis System provides fast, accurate measurement of leaf area and leaf features – making it ideal for plant pathology and phenotyping applications. WinDIAS’s analysis features are well suited to applications where precise colour discrimination is critical. Delta-T Devices was one of the first companies to develop leaf imaging technology ...
-
Manufactured by METER Group, Inc.based in USA
To spray or not to spray? Now you know. Diseases and infections can destroy an entire crop, but at the same time, applying fungicides is costly and time-consuming. If you’re deciding when to spray by monitoring leaf wetness with a resistance grid sensor, you’ll have trouble accurately determining wetness duration without a lot of extra work. You need a sensor with automatic ...
-
Manufactured by Ecomatikbased in GERMANY
T-Tissue: Tissue temperature (e.g., buds, cambium, wood) T-Surface: Surface temperature (e.g., bark) T-Soil: soil temperature or underwater temperature. The T-series sensors are used for direct, continuous and high-precision temperature measurements. The various T-series models are designed specifically to record internal temperatures (T-Tissue), outer/surface temperatures (T-surface) on plants ...
-
Manufactured by Dynamax Incbased in USA
After more than 25 years of experience and a worldwide experience with sap flow sensor manufacturing and design, the Dynamax team brings you the latest innovations and sap flow sensor construction advancements. With continuous customer feedback over the years, and through several years of research, we solved many of the commercial and research needs for a more plant friendly and user-friendly sap ...
-
Manufactured by Ecomatikbased in GERMANY
The SMT100 soil sensor allows for easy, inexpensive soil moisture and temperature measurements. This device enables both the precise analysis of the soil water balance and the determination of plant soil water availability. The SMT100’s integrated temperature sensor additionally provides important data on ground temperature. The device’s numerous applications range from data ...
-
Manufactured by METER Group, Inc.based in USA
Stomatal conductance is complicated. Measuring it doesn’t have to be. Most measurements in the soil-plant-atmosphere continuum are fairly straightforward. Measuring stomatal conductance is not. And since stomatal conductance can’t be predicted from theory and must be measured, you need an instrument that’s easy to use. Presenting the ...
-
Manufactured by Dynamax Incbased in USA
The Dynagage Sap Flow Sensors are the latest technology for measuring the sap flow, and thus the water consumption of plants. These energy balance sensors measure the amount of heat carried by the sap which is converted into Real-Time sap flow in grams or kilograms per hour. The sensors are non-intrusive and not harmful since the plants are heated up 1°C to 5°C ...
-
Manufactured by Ecomatikbased in GERMANY
Leaf-to-Air-Temperature sensors (LAT) are used for direct, continuous and high-precision temperature measurements. The measured temperature parameters include absolute temperatures of the leaf surface, leaf-surrounding ambient air (Tair), and the temperature difference between leaf surface and ambient air (ΔTleaf-to-air). These devices are suitable for long-term application in outdoor ...
-
Manufactured by Dynamax Incbased in USA
The FLGS-TDP XM1000 system is a complete CR1000 based logger system for 32 TDP probes. The CR1000 is housed in a weather-resistant enclosure while collecting data under extremely harsh conditions. The AM16/32 Relay Multiplexer increases the number of sensors that may be scanned by the CR1000 data ...
-
Manufactured by Ecomatikbased in GERMANY
Sap flow sensors are used to continuously measure water uptake in woody plants. It indicates if it is necessary to adapt the irrigation control. The SF-G model corresponds to the classic, two-needle model developed in 1985 by André Granier. ...
-
Manufactured by Ecomatikbased in GERMANY
You know what to measure, we know how: Each project is different. This is especially true in the scientific field. A simple and cost-effective standard solution may be ideally suited to one case, whereas another case may require a more complex and individually designed measurement infrastructure. In this context, our customers benefit from our years of experience, individually designing and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you