Plowing Equipment For Crop Cultivation In Norway
-
Manufactured by Kverneland Groupbased in NORWAY
Kverneland re-introduces the trailed cultivator Kverneland Turbo in working width of 6.5m and 8m. The Kverneland Turbo has been designed with 5 rows of tines for all kind of soil cultivation: stubble cultivation after harvesting from 3cm to 15cm, seedbed preparation after ploughing and also shallow working in spring or 2nd stubble cultivation after manure/slurry and after green fertiliser ...
-
Manufactured by Dalen - Lid Jarnindustri ASbased in NORWAY
The Dalen 2022 is mounted asymmetrically so that the right side is longer then the left. You do not have to drive all the way upto the snowbank when plowing. This mounting generates a throwing action while operating. When reversing the blade, it is the left side that passes under the beam. This allows for a shorter beam, which in turn positions the centre of gravity back towards the tractor, ...
-
Manufactured by Kverneland Groupbased in NORWAY
Knock-on is a patented system and the easiest way of exchanging parts on a cultivator: either in order to adapt the machine for the job to be done or to exchange wearing parts. Kverneland always use steel of highest quality. Thus allowing the Knock-on® system to be based on a simple locking technique: requesting only a hammer to knock on and off the parts within seconds. The Knock-on® ...
-
Manufactured by Vicon - Kverneland Groupbased in NORWAY
With its Mecasem XTC, Vicon has expanded its range of mechanical seeders with integral mounting model based on the tried and tested Vicon Toptiller, the Mecasem XTC ensures the best seeding results after ploughing and conservation tilling. One of the main advantages for operators is the constant depth control for the coulters, thanks to the direct link between the coulter bar and the roller ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable for the bio-masses turning in triangulart ...
-
Manufactured by Standen Engineering Ltdbased in UNITED KINGDOM
2-Bodied, 3-Bodied and 4-Bodied Models. Robust, economical and versatile, the Standen BX Bed Former Series is engineered with a number of different options to suit every soil type so that you can be confident of creating a smooth and even ...
-
Manufactured by ScanStonebased in UNITED KINGDOM
Hydraulic Folding With Transport Locks. 1000 RPM Gearbox. 2 Speed Gearboxes. Cam-Type Safety Clutch Protection. Side Transmission With Gears. Spring Loaded Adjustable Tailgate. Rotor With welded Double Flanges. "C" Shaped 10mm Thick Blades. Rear Linkage With Depth and Pitch Adjustment. Suitable For Bed Widths up to ...
-
Manufactured by ScanStonebased in UNITED KINGDOM
The markers are suitable for marking out as far as 24 feet from the centre of the tractor. This allows 4 ploughs down on 72 inch beds. The markers can also come in to 18 feet from the centre of the tractor for bed making using half depth. Both the left side and the right side markers can be operated without leaving the tractor seat. The machine folds within the width of the tractor (less than 3 ...
-
Manufactured by ScanStonebased in UNITED KINGDOM
The ScanStone single bed tiller comes with quick change blades as standard. The machine can also come with bed makers attached on the back. The bed makers can be auto reset or shear bolt. The rear ploughs are fully adjustable to allow a well cleaned out trench and to stop the ploughs digging in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you