Plowing Equipment For Crop Cultivation In Switzerland
-
Manufactured by Baertschi Agrartecnic AGbased in SWITZERLAND
On the Oekosem 4R750 the 4 rows are spaced 75 cm apart. The working width is thus 300 cm, the working depth of the grubber can be set between 20 and 35 cm. The working depth of the cultivator is between 7 and 15 ...
-
Manufactured by Aebi Schmidt Holding AGbased in SWITZERLAND
Quiet cabin, highest lifting power, enormous maneuverability and practical details like USB plug, storage options and a mobile phone compartment – that is what the Terratrac stands for. Added to this is a perfect panoramic view of the surroundings and the instruments thanks to large glazing areas. Open space and functionality will delight you. A driving seat for even the highest ...
-
Manufactured by Baertschi Agrartecnic AGbased in SWITZERLAND
With the Oekosem 4R700 the 4 rows are spaced 70 cm apart. The working width is thus 280 cm, the working depth of the grubber can be set between 20 and 35 cm. The working depth of the cultivator is between 7 and 15 ...
-
Manufactured by Aebi Schmidt Holding AGbased in SWITZERLAND
Those who know it and drive it love it. The Aebi VT450 Vario with its stepless mechanical-hydrostatic drive (no clutches required) can carry a load of up to six tonnes. With a clean VM turbodiesel engine based on the EURO 6 C standard, the implement carrier is now even more environmentally friendly and efficient. The crew in the cab benefit not only from the high level of comfort and the best ...
-
Manufactured by Baertschi Agrartecnic AGbased in SWITZERLAND
On the Oekosem 6R500 the 6 rows are spaced 50 cm apart. The working width is thus 300 cm, the working depth of the grubber can be set between 20 and 35 cm. The working depth of the cultivator is between 7 and 15 ...
-
Manufactured by PÖTTINGER Landtechnik GmbHbased in AUSTRIA
Mounted ploughs 3-, 4- and 5-shares - up to 140 ...
-
Manufactured by PÖTTINGER Landtechnik GmbHbased in AUSTRIA
Mounted plough with 4 to 6 ...
-
Manufactured by SDF Groupbased in ITALY
SDF considers management of the entire transmission design and implementation process as strategic, along with other core elements of the tractor - the engine, cab and axle. This is why it invests considerable sums every year in Research and ...
-
Manufactured by Zaugg Ag Eggiwilbased in SWITZERLAND
This small ZAUGG snow plough was made for cost-effective clearing of pavements, factory grounds and narrow streets. It can be mounted on small tractors with engine outputs of up to around 30 kW, small municipal service vehicles or single axle ...
-
Manufactured by Zaugg Ag Eggiwilbased in SWITZERLAND
The ZAUGG snow plough G6 is the smallest snow plough equipped with the ZAUGG trip edge system operating on two rubber-sprung elements. It is particularly notable for its simple and robust construction and is especially suited for use on narrow track tractors with engine outputs of up to around 40 kW, municipal service vehicles, skid-steer-loaders and forklift ...
-
Manufactured by PÖTTINGER Landtechnik GmbHbased in AUSTRIA
Mounted ploughs 4- to ...
-
Manufactured by Wikar Oy Abbased in FINLAND
We at Kronos specialise in soil preparation equipment. We have many years of experience as a manufacturer of harrows behind us, having manufactured tens of thousands of them over a period of more than 80 years. Our present range of products comprises four models ranging from 3.15 m to 4.90 m in working width. The rotary harrow has undergone considerable development during these years and its ...
-
Manufactured by DAL-BO A/Sbased in DENMARK
MaxiDisc has each disc separately mounted on special hub – this means MaxiDisc is very compact. This implement can keep an exact working depth in 3 cm as well as 10 cm working depth. The big wear-resisting 560x6 mm jagged discs achieves an efficient preparation of the soil as the rear T-Ring Roller keeps the depth stable, pack the soil and leaves the field even. The angle adjustment of the ...
-
Manufactured by Standen Engineering Ltdbased in UNITED KINGDOM
2-Bodied, 3-Bodied and 4-Bodied Models. Robust, economical and versatile, the Standen BX Bed Former Series is engineered with a number of different options to suit every soil type so that you can be confident of creating a smooth and even ...
-
Manufactured by DAL-BO A/Sbased in DENMARK
CultiMax is a heavy duty 7 row harrow, which is perfect for seedbed preparation on ploughed land before maize, potatoes, grain, sugar beet etc. The working depth is controlled by 4 sets of bogie wheels. The wheels ensure precise and stable field operation. Material and soil can easily flow through the machine when cultivating at depths of between 1 and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you