Plowing Equipment For Crop Cultivation
-
Manufactured by John Berends Implements Pty Ltdbased in AUSTRALIA
Designed for ripping compact ground prior to cultivation and for aerating pastures with minimal disturbance to the ...
-
Manufactured by Agrimirbased in TURKEY
In conformity with the current agricultural conditions are available in 2, 3, 4, 5 and 6 disc version. Disc ploughs have an excellent performance in every type of soil by the basic principles such as soil breaking, soil raising, soil turning and soil mixing. The disc ploughs are used to open the new fields and to process the stony areas. While processing, it avoids the occurrence of the big ...
-
Manufactured by Clemens GmbH & Co. KGbased in GERMANY
Narrow all-purpose plough with hydraulic width adjustment. It is particularly suitable for use in nurseries, in vineyards with narrow spacing between rows and for other row ...
-
Manufactured by A & B Eagleline Equipment, Inc.based in USA
Available with 12″ bottom. 3 point hitch with replaceable cat.1 lift arm pins. Replaceable shins, shares and moldboards. Shear bolt protection. Grade 5 heat treated and plated fasterners. Adjustable width of cut (hill side). Comes assembled, install a-frame and ready to use. 15-25 hp recommended. Gauge wheel with ball bearings optional ...
-
Manufactured by Sabatino S.R.L.based in ITALY
The harrow has a simple but sturdy, available in light or heavy version. It has special bearings, the shafts are mounted on iron bushings and cast iron high-resistance supports. This allows to maintain high feed rates with excellent performance and the ability to be used ...
-
Manufactured by Edwards Farm Machinery Ltdbased in UNITED KINGDOM
The Poly Layer applies plastic or cellulose film and also earths it up at the side, thanks to plough-shares on the side of the implement. With a special three-point linkage, the Poly Layer can be combined with the Wolf Planter, allowing transplanting and film application to take place in a single procedure. The Poly Layer can also be attached to the rear of the Comeb Bed Former for time ...
-
Manufactured by Casorzo Macchine Agricole S.r.l.based in ITALY
Walking Tractor CM80 is the biggest model of the range of machines produced by Casorzo Macchine Agricole S.r.l. It is made of a solid die-cast frame. This machine was designed for professional and demanding use, so it can be chosen as the right solution for difficult use especially in rough ...
-
Manufactured by WILCOX Agri-Productsbased in USA
The Wilcox Finishing Chisel picks up where spring loaded chisel plows leave off. While the finishing chisel shanks are sheer protected, the breakout is typically 2-3 times that of spring-loaded shanks. Many western soils will trip or force spring shanks to pivot upward before the chisel has achieved the desired depth. The rigid shank applies the maximum amounts of fracturing force to the ground ...
-
Manufactured by Conception Maximo Inc.based in CANADA
Drainage up to 183 cm (6 feet deep). Clearance of 50 cm (1’ 8’’) for a total depth up to 2.3 m (7’ 8’’). Approximate weight 12 000 lbs for maximum ...
-
Manufactured by Kello-Biltbased in CANADA
This model is perfect for plowing down of heavy residues and primary tillage operations and light industrial ...
-
Manufactured by OZBIL AGRICULTURAL MACHINERYbased in TURKEY
The machine is connected to a tractor through a three-point hitch mechanism. If a rolling harrow combination (roller) is wanted to use, it is removed from its pin and adjusted. Number of tines can be reduced and the distance between tines can be changed depending on the structure of soil, humidity and operation depth. Soil processing is started after adjusting the desire to depth from the ...
-
Manufactured by Countrywide Industries Pty Ltdbased in AUSTRALIA
Discs: 28" x 5/16". Tyres: 13.0/65 x 18 x 16 ply. Gang Bolts: 2" diameter all model (H/T). Bearings: Protected greasable gang bearings with triple lip seal. main Frame: 200 x 100 x 9mm RHS. Disc Weight: Approx 160kg per ...
-
Manufactured by Gates Manufacturingbased in USA
Great in the Field. The primary use of Gates Mounted Magnum Harrows is enhanced performance of your secondary and primary tillage tool. They are designed to handle tough residue in all conditions and prepare fields in fewer passes. Saves Time and Fuel. With Gates Mounted Magnum Harrows, you can eliminate tillage passes and prepare the seedbed in less time. With today’s high fuel prices and ...
-
Manufactured by Marden Industriesbased in USA
3 Arm Middle-Buster unit which is being developed for the upper coastal plains. This unit has a bed width of approximately 60″ and with center tillage. It can fracture hard pan soil up to 10″ in depth. 3 Individual arms and 40″ travel. HP requirements 125 – 150 ...
-
Manufactured by Basant Products (India)based in INDIA
We manufacture a range of plough that form a crucial part of tractors and are hydraulically operated implements used for preparing the land for cultivation. Available in customized specifications, this plough can be directly mounted on the tractors and are mostly used in dry and squat land conditions, where clearing the land is a major We take personal care while manufacturing of Plough to ensure ...
-
Manufactured by Faza Srlbased in ITALY
Hydraulic reversible plough (adjustable width on skid) with hydraulic side displacement and swinging ...
-
Manufactured by ALPLER Ziraat Aletleri A.S.based in TURKEY
Non-stop trouble free plowing opportunity for stony, rooted and first time plowed lands. The two helical springs lets the swing out bodies re-enter the soil immediately. The spring pressures can be easily adjusted for each body to different soil conditions in order to obtain optimum release characteristics. Flanged frame to add an extension, if required. Mechanical or Hydroulic working width ...
-
Manufactured by Standen Engineering Ltdbased in UNITED KINGDOM
2-Bodied, 3-Bodied and 4-Bodied Models. Robust, economical and versatile, the Standen BX Bed Former Series is engineered with a number of different options to suit every soil type so that you can be confident of creating a smooth and even ...
-
Manufactured by HE-VA ApSbased in DENMARK
HE-VA Front-Tiller is a front harrow with two harrow sections with up to 300 mm working depth. HE-VA Front-Tiller can be combined with a stubble implement or a drill unit - mounted behind the tractor, resulting in an optimal utilization of the tractor. The strong tines with mechanical spring release - preloaded for 455 kg - ensure that the Front-Tiller is an effective machine for soil loosening ...
-
Manufactured by Murphy Liftbased in USA
6 x 19 wire rope is a general purpose steel rope that’s widely used and is commonly used for winch lines, skylines and chokers. This wire rope overs a great overall combination of both flexibility and wear resistance. * EIPS (Extra Improved Plowed Steel) wire rope has roughly 10% more strength than regular IPS. Independent wire rope core ( IWRC ) provides added strength, reduces the amount ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you