Plowing Equipment For Crop Cultivation
-
Manufactured by 4F Maschinentechnik GmbHbased in GERMANY
Stable construction. Ideal for snow removal on ...
-
Manufactured by BRON A Division of Roberts Welding and Fabricating Ltd.based in CANADA
An excellent balance of power and agility, the 440 HP BRON 450 is able to plow at a maximum depth of 7'6'. The BRON 450 always gets the job done no matter the soil conditions. BRON 450 makes no exceptions with improved visibility, plowing accuracy and enhanced operator ...
-
Manufactured by Little Falls Machine Incbased in USA
Rigid and trip blade units for use at all operating speeds. Recommended for municipal use on: airports, highways, city streets and rural roads. For use on trucks, motor graders and wheel ...
-
Manufactured by Gyraxbased in FRANCE
The GYRAX cultivators with stationary chassis are proposed in 3 widths: 3.00 m, 3.30 m and 3.90 ...
-
Manufactured by AIO SRLbased in ITALY
Suitable for very hard soils, the AIO tiller with its blade rotor, besides ensuring the perfect preparation of the soil for sowing, also allows preliminary work without ploughing and the perfect mix of harvest wastes in the ...
-
Manufactured by Little Falls Machine Incbased in USA
The Falls Heavy Duty Snow Wing mounted in combination with a Front Snow Plow is an awesome one-two punch. Great for heavy duty benching or shelving operations. Available for Truck ...
-
Manufactured by Escudero - Fabricacion de maquinaria agrícola S.L.based in SPAIN
Fixed ecologic plough, designed so that crop residue can be turned or buried with minimum tillage, under any conditions and on any kind of land. The work depth reached by this equipment ranges between 10 and 30 centimeters. The separation between plough bodies prevents clogging, irrespective of the amount of stubble. It has hydropneumatic safety system, from 5 up to 14 bodies, with oscillating ...
-
Manufactured by Agrosbased in SWEDEN
We have carried out tests with straw filter during spring and summer 2003. The purpose is to reduce the content of nutrients in drainage and waste water. The straw is supposed to be growth site and deliver energy to the microbs. Energy is a limiting factor for the microbs in drainage water, but the access to nutrients is normally good. The straw has an extremely low content of nutrients, but the ...
-
Distributed by Vin Rowe Farm Machinery Pty Ltd.based in AUSTRALIA
Berends manufacture a huge range of 3 point linkage mounted machines including: Aerators, bale handlers, carryalls, chisel ploughs, grader blades, post hole diggers, slashers, and ...
-
Manufactured by Abollo Agricultural Machinery Industry and Trading Co.based in TURKEY
Adjusting wheel is the most important aid the tractor and driver. Line setting of adjusting wheel has to be done at the first use of plough. In setting, adjusting wheel line must be paralel to the lines of discs on the ground. In other case, movement of plough began to quit its right line and it causes ...
-
Manufactured by Escudero - Fabricacion de maquinaria agrícola S.L.based in SPAIN
Reversible ecologic plough, designed so that crop residue can be turned or buried with minimum tillage, under any conditions and on any kind of land. The separation between plough bodies prevents clogging, irrespective of the amount of stubble. It is manufactured from 4 up to 11 bodies, using top-quality materials which offer a maximum durability and an exceptional performance. It has fuse safety ...
-
Manufactured by W & A Manufacturing Co.based in USA
Make quick work of getting that standing water out of your field with the Delta Furrow Plow, Always looking to give Delta farmers the tools they need to get the most out of their soil, we’re introducing the W&A Delta Furrow Plow. Built to withstand the toughest soil conditions the south can throw at it, the Delta Furrow Plow can get you the furrows you need to get water off your fields ...
-
Manufactured by BASRIJS BVbased in NETHERLANDS
Suitable for dibbing planting holes in the ground, e.g. for leek. Basic versions: 3 rows at 37 to 50 cm or 4 rows at 75 cm or 5 rows at 60 cm. Dibbing distance in the row 8 to 30 cm, adjustable by exchanging chain wheel and/or selecting tractor gear. Dibber-hole diameter 30 mm. Capacity about 1200 meters per hour. Aptionally available: furrow ploughs, various plant-hole stamps, track markers, ...
-
Manufactured by Savannah Global Solutionsbased in USA
Designed for lowland operations where a large mound is required to raise the planting site above wet season inundation. These trailing plows are fitted with either flotation tires, or full width rollers to carry the plow and are connected to the drawbar of a tractor or dozer. Horsepower requirements depend largely on spee d and depth of cut, as well as soil type. Ideally, bedding plows operate ...
-
Manufactured by Henke Manufacturingbased in USA
The New lift group pulls the plow 9” closer to the grader resulting in less stress on the front axle which correlates to less wear and tear.Mechanical Stops- arms cannot go below grade and will protect the cylinder from overextending and retracting too much which can cause damage.4” bore x2”Nitrided Rod x 22.25” stroke double acting Lift Cylinder is 56% faster than the old ...
-
Manufactured by Cousins of Emneth Ltdbased in UNITED KINGDOM
Cousins’ Surface cultivator is a product of the ongoing ‘i-tillage’ programme with agronomists Hutchinsons. By cultivating the top 50mm of soil it has proven highly effective against black grass and won the IMMA innovation award for cultivation kit at Cereals 2014. The International Manufacturer's Machinery Awards recognise the best new farm equipment on the market and aim to ...
-
Manufactured by Escudero - Fabricacion de maquinaria agrícola S.L.based in SPAIN
Reversible mouldboard plough with fuse safety system, from 2 to 4 bodies, with oscillating and removed head. Manufactured using top quality materials which offer a maximum durability and exceptional performance. Frame of 120×120. Hydraulic or mechanical adjustable working width system from 12” up to 20”. Normal or fast coupling, conventional or slatted mouldboard. Availability ...
-
Manufactured by Yucheng Leyuan Machinery Co., Ltd.based in CHINA
1L series share plow is a four-wheel tractor mounted plow, mainly used for plowing loam, the sand loam , cultivated and dry ...
-
Manufactured by AG Engineering & Development Companybased in USA
The Tillage Master is a multi-function tillage implement that can be altered to function as a Dammer Diker®, a ripper, a chisel plow, a bed splitter, a lister/mark-out bar, or a drill master. This unique tool bar design utilizing high-lift, hydraulic reset shanks gives trouble free inter-row ripping and diking in the most severe rocky ...
-
Manufactured by HERCULANO Alfaias Agrícolas, SAbased in PORTUGAL
Tubular Chasis. Independent discs Body. Plain Discs of 26'' (660mm) or 28'' (710mm). 3 angles of incidence: 0 degrees, 7.5 degrees and 15 degrees. 5 cutting angles: 35º degrees, 40º degrees, 45º degrees, 50º degrees and 55º degrees. Possible to adjust the distance between the feet of the discs in the chassis of the ridging ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you