Only show results in Texas? Ok

Plowing equipment for Crop Cultivation

  • Kompaktomat - Model MAX - Presowing Combinator

    Kompaktomat is especially suitable for preparation of the sowing bed after ploughing. The sowing bed is processed from 0 to 10 cm. Enables variability of working members.

    By Farmet a. s. based in Česká Skalice, CZECH REPUBLIC. from Agricultural Machinery - Pre-Sowing Soil Preparation Product line

  • Triolent - Model PS - Half Carried Chisel Cultivator

    Chisel cultivator Triolent is especially suitable for full-area stubble-breaking with intensive mixing effect. The soil is processed up to the depth of 35 cm and thus can replace ploughing. Excellently incorporates plant residues into the soil.

    By Farmet a. s. based in Česká Skalice, CZECH REPUBLIC. from Agricultural Machinery - Soil Processing up to 35 cm Product line

  • HEN - Model SBA-T and SBA-F - Agriculture Stone Crusher

    This method of construction from stone crusher is built for crushing stones in agricultur developed and is there successfull in use.The aim is, big, for mechanikal manufactur from seedbed and at the automatical harvest disturbed Stones befor you crushed it, that the corresponding used maschines get no damage.The crushed stones, make an important ...

    By Hen Ag based in Steinheim, GERMANY.

  • IRIS - Model DS-E - Subsoiling Ploughs

    It is recommended the employment of Gascon International subsoiling ploughs after a particularly dry season. During a dry season, the soil becomes compact and hard and the roots cannot penetrate deep enough to find water or the adequate moisture that allow them to survive. The result, in case of not invert this situation, is that the majority of ...

    By Gascon International based in HUESCA, SPAIN. from Subsoiling Ploughs Product line

  • Inter-Row Cultivators

    Garford inter-row cultivators are custom built to suit customer's requirements. Garford have experience in models for all row crops. A wide range of shares are available including the traditional duck foot A share, flat A shares, L blades, and Garford's specially developed Slash blade which ensures no “slip by” but also has good plant ...

    By Garford Farm Machinery Ltd based in Peterborough, UNITED KINGDOM.

  • WILCOX - Finishing Chisel

    The Wilcox Finishing Chisel picks up where spring loaded chisel plows leave off. While the finishing chisel shanks are sheer protected, the breakout is typically 2-3 times that of spring-loaded shanks. Many western soils will trip or force spring shanks to pivot upward before the chisel has achieved the desired depth. The rigid shank applies the ...

    By WILCOX Agri-Products based in Walnut Grove, CALIFORNIA (USA).

  • Finishing Rippers

    Finishing rippers are used in plowed fields to level and break clods. Being  able to enter fields before moisture is lost helps in breaking the clods.  Compaction is eliminated due to the ripper shanks breaking up the soil  level for the rollers. The rollers gauge the depth of the shanks and the  shanks put down pressure on the ...

    By Dave Koenig Enterprises, Inc based in Mesquite, NEW MEXICO (USA). from Rippers Product line

  • Marden - Model CRP154 - Four-Arm Ripper/Coulter Plow

    HP requirements 150 - 200 Crawler. 4 Individual arms. Approx WT 9,500lbs. Four-Arm Ripper/Coulter Plow with rear mount single cylinder fold up lift. This unit while operating on a float can maintain a continuous 18' to 24' ripper depth while contouring. The CRP154 has a bed width of 84'.

    By Marden Industries based in Punta Gorda, FLORIDA (USA). from Sub-Soil Plows Product line

  • AVR - Model UH 3744 - Four Row Trailed Potato Planter

    The UH 3744 is a four-row trailed planter. With its mechanical drive (using a large wheel) and the big 3,500 kg seed potato bunker capacity, this planter is a true workhorse! It is available for all inter row distances (75-90 cm). When describing the UH 3744, simplicity and capacity are keywords. When planting potatoes, the main advantage of ...

    By AVR bvba based in Roeselare, BELGIUM. from Potato Planters Product line

  • Model ACS Series - Stubble Cultivator

    Stubble Cultivator is working at 15-25 cm work depth depening to the requirement of the soil.After the harvest the plants are left at the field which is enriched the ecological life of th soil however they should be removed for the next seeding operation. With “Wing Share Blades” it rips the soil (instead of turning it like plough) and ...

    By Azim Ziraat Aletleri San. ve Tic. A.S. based in Germencik, TURKEY. from Cultivation Product line

  • Model EJ Series - Chiesels

    In the requirement of breaking the “plow-pan”, “natural-pan” or “traffic pan” at the soil we need to work deeper. EJDER series Chiesels are used on 30-55cm depth of the soil to break the “pan” and also this would improve the capillarity and aeration of the soil. Highly constructed chasis (80 cm ...

    By Azim Ziraat Aletleri San. ve Tic. A.S. based in Germencik, TURKEY. from Chiesels Product line

  • Farmall - Model C Series - Utility Tractors

    6 Models, 64-117 (PTO: 50-99) Engine Horsepower: The utility Farmall C series is a deluxe line of tractors, combining power and performance with a superior operator environment.

    By Case IH - a division of CNH Global based in St. Valentin, UNITED KINGDOM. from Tractors - Farmall Series Product line

  • Vibromulch - Model 9-12m - Tine Cultivators

    The Vibromulch is a semi-mounted stubble-breaker with 4 rows of vibrating tines available in 9m and 12m. It replies to the farmers’ demands, who are looking for performance.

    By AGRISEM International S.A.S. based in Ancenis, FRANCE. from Tine Cultivators Product line

  • Model PZ - Bed Ploughs

    Bed ploughs 3, 4 and 5 furrow ploughs with stone protection

    By AGRO-MASZ based in Masłowice, POLAND. from Ploughing Product line

  • Model EPR330C – EPR410C - Folding Combine Grubber

    Grubber for low depth with nine or eleven special steel legs with safety system preventing overloads on break screw. Universal 3 point connection 2°- 3° category or 3°- 4° category.Equipped with hydraulic system for closure during transport (2,50 mt) with locking and safety valve. Equipped with feet. The end of the legs with ...

    By Collari s.n.c. based in Castello d`Argile (BO), ITALY. from Grubbers Product line

  • John Deere - Model 2410 - Chisel Plow

    The John Deere 2410 Chisel Plow has been field-proven to provide consistent residue management for years. And it’s as reliable as it is productive. The robust frame of the 2410 delivers added strength for more aggressive performance. Heavy-duty 4x4-inch box-beam-steel cross members give the 2410 plenty of backbone.

    By John Deere based in Moline, ILLINOIS (USA).

  • Pilot Scale / In-Process Manufacturing Equipment

    PHARMAG is a fully owned subsidiary of PharmaTest AG.  The PharmAG Pilot Plant System is specifically designed for specialized applications that include new product development, scaling up to test small batch quantities, and the production of specialty materials that are not necessarily manufactured in larger quantities.

    By Vortex Sales Group based in Benson, NORTH CAROLINA (USA).

  • Bellota - Concavities Range

    Boron steel. Hardness: 50 +/2 HRc guaranteed via the use of an automatic control system in heat treatment. This hardness ensures flexibility and the ability to absorb impacts without breaking, providing the disc a longer life-span, even in the most severe soil conditions. Lathed, precise and uniform edges, obtaining optimal soil penetration. ...

    By Bellota Agrisolutions based in Legazpi, SPAIN. from Disc Harrow Product line

  • Plough Leaf Springs

    Complete leaf spring and individual sheets. Characteristics: Special, high elasticity steel with high capacity to recover initial geometry. Specific integral heat treatment that provides each leaf with optimum characteristics. The sheets are individually shot-blasted and painted before the set is assembled. Epoxy paint with UVA protection.

    By Bellota Agrisolutions based in Legazpi, SPAIN. from Plough Product line

  • Model ROLLER Series - Lower Cultivation

    The ROLLER DANTE is aimed at lower cultivation costs on a ploughed soil, in autumn. It can be used instead of a disc harrow and, above all, instead of a rotary harrow. Thank to the tools that are assembled on this machine, it can work at a high speed (8-10 km/h). As a result costs decrease. Instead of the Paker roller, the customer can request two ...

    By Dante Macchine based in Bagnoli di Sopra (PD), ITALY. from Autumn Cultivator Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you