Marshall Crop Cultivation Equipment
-
Manufactured by Roesner PTY LTDbased in AUSTRALIA
The 10 tonne trailer model is the ideal tow behind spreader for large farming enterprises. The premium 900 Series configuration was first released in the early 2000’s. It features a heavy duty PVC endless belt which is driven by a rubber lagged pulley and supported by low maintenance stainless steel rollers. To aid belt tracking, troughing rollers are fitted inside the chassis and a front ...
-
Manufactured by Roesner PTY LTDbased in AUSTRALIA
The premium 900 Series configuration was first released in the early 2000’s. It features a heavy duty PVC endless belt which is driven by a rubber lagged pulley and supported by low maintenance stainless steel rollers. To aid belt tracking, troughing rollers are fitted inside the chassis and a front cage roller is used for adjustment of belt ...
-
Manufactured by Charles J Marshall (Aberdeen) Ltdbased in UNITED KINGDOM
The whole concept behind the Vesuvius Vantage (Rear Discharge Spreader) was based on the premise that a spreader was required in the marketplace that should be virtually maintenance free. A tall order but one we have certainly achieved! The Vesuvius Vantage requires a daily visual check of the gearbox oil level and greasing by means of five remote points. Quite simply that is all that is ...
-
Manufactured by Charles J Marshall (Aberdeen) Ltdbased in UNITED KINGDOM
The Marshall QM/6 is the entry level monocoque trailer in our range, but still has the same build and level of engineering that goes into all our trailers. The construction of the body is extremely robust, with 3.5mm sides and a 5mm flat floor ensuring the trailer can handle demanding work. The flat floor also prevents premature rusting of the trailer, since there are no joints for water to sit ...
-
Manufactured by Charles J Marshall (Aberdeen) Ltdbased in UNITED KINGDOM
The Marshall QM/8 is an extremely popular trailer in farming areas with narrow roads and lanes. The large cubic capacity of the trailer means it has room to carry a significant load, but remains small enough to easily manoeuvre. The QM/8 also has the advantage of tandem axles, giving the customer the option to spec either rockers or springs as a no cost option. The body is constructed with 3.5mm ...
-
Manufactured by Roesner PTY LTDbased in AUSTRALIA
The 4.5 model is the essential tow behind spreader for medium-sized enterprises. The 800 series variant is an economically priced machine, first released to the market in the early 1980’s. The feed system on the 800 Series machines includes a 2ply rubber belt attached to a high-grade calibrated 10mm chain and drive sprockets. The chain system is supported by heavy duty wear resistant nylon ...
-
Manufactured by Roesner PTY LTDbased in AUSTRALIA
10 tonne trailer models are the ideal tow behind spreader for large farming enterprises. The 800 series variant is an economically priced machine, first released to the market in the early 1980’s. The feed system on the 800 Series machines includes a 2ply rubber belt attached to a high-grade calibrated 10mm chain and drive sprockets. The chain system is supported by heavy duty wear ...
-
Manufactured by Charles J Marshall (Aberdeen) Ltdbased in UNITED KINGDOM
The Marshall BC/18 is the most compact model in our bale trailer range, providing excellent maneuverability for narrow lanes and tight spaces. It has box section bearers and runners which provides exceptional strength and prevents water from prematurely rusting the trailer. The strength of the trailer is further enhanced by heavy-duty channels forming a square chassis that extends the length of ...
-
Manufactured by Charles J Marshall (Aberdeen) Ltdbased in UNITED KINGDOM
The MS60 is an ideal size for use on small-holdings or on farms with steep ground where larger spreaders could potentially be unsafe. It has a 4mm drum and 6mm ends, which is hugely over engineered for the size of the spreader and therefore drastically improves its lifespan. The chains used in this model are case hardened flail chains with fully-welded heads, not simply held on with a bolt or ...
-
Manufactured by Roesner PTY LTDbased in AUSTRALIA
The 6 tonne trailer model is the essential tow behind spreader for medium-sized enterprises. The 800 series variant is an economically priced machine, first released to the market in the early 1980’s. The feed system on the 800 Series machines includes a 2ply rubber belt attached to a high-grade calibrated 10mm chain and drive sprockets. The chain system is supported by heavy duty wear ...
-
Manufactured by Roesner PTY LTDbased in AUSTRALIA
The 800 series variant is an economically priced machine, first released to the market in the early 1980’s. The feed system on the 800 Series machines includes a 2ply rubber belt attached to a high-grade calibrated 10mm chain and drive sprockets. The chain system is supported by heavy duty wear resistant nylon skids ensuring a positive ...
-
Manufactured by Charles J Marshall (Aberdeen) Ltdbased in UNITED KINGDOM
The Marshall feed trailer range combines a unique, practical design with exception built quality. In addition all our feed trailer have a number useful features integrated into the design including a timber slatted floor, removable drawbar, swinging taildoor and angled sides to assist feeding. This 15' trailer has 32 feed spaces and 11.5 x 15 - 10ply ...
-
Manufactured by Roesner PTY LTDbased in AUSTRALIA
The 800 series variant is an economically priced machine, first released to the market in the early 1980’s. The feed system on the 800 Series machines includes a 2ply rubber belt attached to a high-grade calibrated 10mm chain and drive sprockets. The chain system is supported by heavy duty wear resistant nylon skids ensuring a positive ...
-
Manufactured by Roesner PTY LTDbased in AUSTRALIA
The 4.5 tonne trailer model is the essential tow behind spreader for medium-sized enterprises. The premium 900 Series configuration was first released in the early 2000’s. It features a heavy duty PVC endless belt which is driven by a rubber lagged pulley and supported by low maintenance stainless steel rollers. To aid belt tracking, troughing rollers are fitted inside the chassis and a ...
-
Manufactured by Roesner PTY LTDbased in AUSTRALIA
The 6 tonne trailer model is the essential tow behind spreader for medium-sized enterprises. The premium 900 Series configuration was first released in the early 2000’s. It features a heavy duty PVC endless belt which is driven by a rubber lagged pulley and supported by low maintenance stainless steel rollers. To aid belt tracking, troughing rollers are fitted inside the chassis and a front ...
-
Manufactured by Roesner PTY LTDbased in AUSTRALIA
The 2.5tonne trailer model is well suited for smaller farms, vineyards and orchards. The 800 series variant is an economically priced machine, first released to the market in the early 1980’s. The feed system on the 800 Series machines includes a 2ply rubber belt attached to a high-grade calibrated 10mm chain and drive sprockets. The chain system is supported by heavy duty wear resistant ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you