Crop Cultivation Equipment in Iowa

  • ZATURN - Orchard Mist Blowers

    Versatile - but uncomplicated, it meets your requirements for optimised small bush or large tree spraying. 1000 to 3000 L up to 55000 m3 air/h

    By Hardi International A/S Office in Davenport, IOWA (USA). from Orchard Mist Blowers Product line

  • Lundell - Poly Cupped Auger Flighting

    The Rugged Flighting That's Gentle to Seed. What happens when you combine the longevity of Lundell's poly technology with trusted university testing? You get Poly Cupped Flighting, a tough industry giant that handles your seed with care during planting season. Go ahead and try. Lundell's Poly Cupped Flighting is tough enough to handle anything you ...

    By Lundell Plastics Corporation based in Odebolt, IOWA (USA). from Poly Cupped Auger Flighting Product line

  • Vermeer - Model TE330 - Tedder

    Designed to maneuver like a model half its width, the TE330 gives you an impressive 33.5'/10.2 m of tedding action. Tight turning circle and constant-velocity U-joints improve handling. Unique trailed framework and hydraulic lift and fold provide convenient transporting. Double-framed construction stabilizes tedder arms as they meet the contour of ...

    By Vermeer based in Pella, IOWA (USA). from Tedder Product line

  • Model 25A - Flail Mower

    With heat-treated knives, heavy-duty gear cases, and durable construction, John Deere Flail Mowers are built to last. The 25A gives you a cutting width of 6 ft. 6 in. (1.98 m), 1,850 rpm rotor, and 36 kives.

    By K.C. Nielsen Ltd. based in Humboldt, IOWA (USA).

  • Pull Type Gold Digger Tile Plow

    New in spring of 2012 has not been used. Has RTK grading system. Honda gas engine mounted on the plow for hydraulics.

    By McCormick Equipment based in Pleasantville, IOWA (USA).

  • Percival - Model I-36DL - Dew Formation Chamber

    This chamber is designed for plant pathology studies and innoculating plants.Not intended for long-term plant growth.

    By Percival Scientific, Inc. based in Perry, IOWA (USA).

  • Model GF-32 - Grab Forks

    The GF-32 Sabretooth Fork has two high tensile strength, forged, curved teeth. This versatile grapple easily penetrates into material. It is shown attached to the top rail of the Tine Bucket.

    By Westendorf Manufacturing Co., Inc. based in Onawa, IOWA (USA). from Grab Forks Product line

  • Custom Built Applicators

    Precision Tank has been building and designing fertilizer application equipment for over 50 years. While our line of Precision Tank dry and liquid applicators offers our customers a wide range of choices, sometimes you need something unique. Our team works with you to design and manufacture a custom-built applicator to meet your specific needs. No ...

    By Precision Tank, Inc. Office in Humboldt, IOWA (USA). from Custom Built Applicators Product line

  • Steel Reinforced Enclosures

    The standard feature of this enclosure is a steel exterior, with multiple color options for site aesthetics. All other components are based on each customer’s specific requirements. If you have a requirement that is not listed as an option, please contact us to discuss your needs.

    By Unison Solutions, Inc. based in Dubuque, IOWA (USA).

  • Optimum - Model AcreMax Xtra - Insect Protection

    Offers growers an option for single-bag refuge in areas needing both above- and  below-ground insect protection. Optimum AcreMax Xtra products contain the following in a single bag: Pioneer brand hybrid with a pyramid of three trusted and industry-leading traits - Herculex XTRA (HXX) Insect Protection and YieldGard Corn Borer (YGCB) for ...

    By DuPont Pioneer based in Johnston, IOWA (USA).

  • AGCO - Model S-150 & S-200 - Willmar Spreader

    Designed specifically for orchard and turf use, the dual spinner Willmar® S-150 and S-200 fit the precision pattern needs of smaller applications. Both models are finished in a high-performance, chemical-resistant primer/acrylic urethane for corrosion resistant.

    By Davis Equipment Corporation based in Johnston, IOWA (USA).

  • Model Gold Series - Double Rubber Rake Tooth for Wheel Rakes

    Heat treated tines for long lasting performance. Consistent rubber quality assured by injection molding. Hook style head for maximum rubber adhesion.  Dimensions.   Yoke height: 1-3/8'. Bolt hole diameter: 5/16' , Tine length from bottom of yoke: 7-1/4'. Tine diameter: 1/4'.

    By Concentric International based in Des Moines, IOWA (USA). from Double Rubber Rake Tooth for Wheel Rakes Product line

  • Almaco - Model R1 - Rotary Combine

    The R1’s advanced, rotary threshing  and high torque design enables earlier harvest of large green plants, tough stems and high plant foliage. This greatly increases the harvest window, allowing you to start earlier and finish faster.

    By Almaco based in Nevada, IOWA (USA). from Rotary Combine Product line

  • HARDI - Foam Nozzles

    HARDI foam nozzles are excellent for application of liquid fertilizers. Choose foam nozzles for broad leaf application - the large air inclusion bubbles will be reflected on the leaves and minimize crop damage.

    By Hardi International A/S Office in Davenport, IOWA (USA). from Foam Nozzles Product line

  • Charger - Model II-FB - Overhead-Discharge Tender

    The Charger II-FB Overhead-Discharge Tender features a 9 – 12 – 9 auger system.  This versatile system can rotate 270 degrees, allowing you to unload to the left, right or the rear of the tender.  A hydraulic motor is connected to a gearbox that rotates the horizontal discharge auger.  The heavy-duty hydraulic cylinder ...

    By Ray-Man, Inc. based in Keota, IOWA (USA). from Overhead-Discharge Tender Product line

  • Demco - Model 550, 650 & 750 - Gravity Flow Wagons

    Demco’s gravity Flow wagons have always been known for their Strength and Durability! All Demco Gravity Flow Wagons have heavy duty spindles rated for full capacity. Two wheel brakes are standard on 450 and 550 model wagons. Four wheel brakes are standard on the 650!! The Heavy Duty Torsion bar Suspension on the 550 and 650 models provides ...

    By Demco Manufacturing Co. based in Boyden, IOWA (USA). from Gravity Flow Wagons Product line

  • Dew Drop Drill

    Very user friendly, Low center of gravity, Large aggressive tires, Twin seed boxes, Five application rates for fluffy seed, Nine settings for small seed, 3 foot no-rows pattern, Durable powder coated componments, Self-contained 12 volt power supply

    By Little Sioux Prairie Company based in Spencer, IOWA (USA).

  • Vermeer DiscPro - Model MC1030 - Mower Conditioner

    The Vermeer MC1030 DiscPro is one of the most flexible mower conditioners you can buy. Available with either steel conditioner rollers or our exclusive paddle-style conditioner, the MC1030 features the Vermeer patented DynaGuard swing-back suspension, exclusive Quick-Clip Blade Retention System and other innovations. With a 13'3'/4 m width, you ...

    By Vermeer based in Pella, IOWA (USA). from Mower Conditioner Product line

  • Model Super-10- 30018 - Bale Feeder

    Weight 222 lbs. Heavy-duty design. All upright tubes mitered and welded for strength and durability. Diagonal bars help save on hay. 18” spaces for larger cattle. Height 52”. 96” in diameter. 3-piece bolt together design for easier handling. Powder coat paint

    By Franklin Equipment Inc. based in Earlville, IOWA (USA). from Bale Feeder Product line

  • Commander - Model DWH-500C - Sloped Double Wall Aluminum Grain Trailer

    The 'original' sloped double wall aluminum grain trailer by Wilson Trailer is available in both widths and ALL lengths! Experience the reliability of a proven and tested design, rather than the trials of others attempting to duplicate it. Wilson's Commander model has been serving the grain hauling industry for many years. Most notably the ...

    By Wilson Trailer Company based in Sioux City, IOWA (USA). from Sloped Double Wall Aluminum Grain Trailer Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you