Seed Rows (Soil Cultivation) Equipment
-
Manufactured by Samco Agricultural Manufacturing Ltdbased in IRELAND
, the drill offers a very good quality of sowing regardless the type and size of the seed. This 60 PT drill is 4.5 meters wide, it has a Seeder, mulch film Layer & Sprayer. The 6 Row machine can sow 20 hectares per day and is a suitable machine for large area contractors and ...
-
Manufactured by Samco Agricultural Manufacturing Ltdbased in IRELAND
SAMCO pneumatic drills were developed in order to provide users with a consistent quality of seedlings even in difficult conditions. Equipped with Optima Kverneland seed units, the drill offers a very good quality of sowing regardless the type and size of the seed.The 2 Row machine is generally sold to sweet corn growers and small farmers. It ...
-
Manufactured by Samco Agricultural Manufacturing Ltdbased in IRELAND
units, the drill offers a very high quality of sowing regardless the type and size of the seed. The Samco 80PT is 6.2 meters wide, it has a Seeder, mulch film Layer & Sprayer. The 8 Row machine can sow 35 hectares per day and is a suitable machine for large area contractors and ...
-
Manufactured by K-Hart Industries Ltd.based in CANADA
The K-Hart furrow closer was developed specifically to alleviate the problem of uneven soil placement overtop of the seed rows on the back row of the air drills or cultivator. When using direct seeding equipment, especially double shoot openers, soil is thrown out of the seed trench far enough that it does not ...
-
Manufactured by Laumetris Ltdbased in LITHUANIA
Laumetris Ltd. produces pre-sowing tillage machinery cultivators of 2 – 10 m. width. Cultivators are manufactured so that after one drive soil is leveled, hoed, compacted and ready for seeding. In the first row, there are segmented spring leveler boards, which are easily regulated from tractor with hydro gear. Further, there are 4 – ...
-
Manufactured by Sulky Burelbased in FRANCE
Available as a rear mounted version or in combination with the Xeos TF front hopper, the Kronos can adapt to all tractors. Everything is provided to increase site application rates with the Kronos seed drill, a 1700 l hopper which lets you reduce the number of refills, hydraulic folding to limit down time between plots and a working speed ...
-
Manufactured by Claydon Drills/ Claydon Yield-o-Meter Ltdbased in UNITED KINGDOM
The 3m Hybrid M3 is one of the most popular mounted drills in the range with owner-operators. With a 1,750 hopper and a 150hp power requirement, the M3 can drill up to 20 hectares a day. It comes with a full range of rear toolbar and seeding set-up options. The leading tine can also be swapped out for the LD lower disturbance set-up, and a ...
-
Manufactured by Claydon Drills/ Claydon Yield-o-Meter Ltdbased in UNITED KINGDOM
The 4m Hybrid M4 has a hopper capacity of 1,750l and comes with a full range of rear toolbar and seeding set-up options. The leading tine can also be swapped out for the LD lower disturbance set-up. The M4 has a power requirement of 200 ...
-
Manufactured by Claydon Drills/ Claydon Yield-o-Meter Ltdbased in UNITED KINGDOM
The 3m Hybrid M3F steps up from the M3 with a larger capacity hopper at 2,100 which can be divided 50:50 to apply fertiliser at the same time as drilling, either above the seed or below it. The M3F comes with a full range of rear toolbar and seeding set-up options. The leading tine can also be swapped for the LD lower disturbance ...
-
Manufactured by AGRI FARM Machinery GesmbHbased in AUSTRIA
The cultivator PLANOMAT is the right implement for the economical and fast tillage, with low wear and little maintenance. It is ideal suitable for tilling in catch crops, working after heavy cultivators, incorporating slurry and for the cost-effective seedbed preparation for grain and maize. The narrow tine spacing of 7cm makes it possible to process the seedbed accurately, even with a relatively ...
-
Manufactured by WIFO-Anema BVbased in NETHERLANDS
belts(7), which are fed by the supply discs (4) which counter rotate at a speed adjustable to that at which the machine is traveling over the field. The seed supplied by the conveyor belt (2) are spread out by the rotating discs (5) and picked up and carried to the narrow conveyor belts ...
-
Manufactured by Väderstad ABbased in SWEDEN
Thanks to its array of front tools and drilling systems, the box seed drill Rapid is always the right choice, irrespective of cropping system. The unique depth control function and coulter pressure result in optimal seed placement even at high driving speeds. Few moving parts and cushioning on all working parts give the machine an extremely ...
-
Manufactured by Plutus Science Co ., Ltdbased in CHINA
A Mounted seed drill is a precision planter that is mostly used for grain seeds such as wheat, barley, oats, alfalfa, rapeseed, peas, etc. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you